Cut pipe quickly and with minimal digging using REED Low Clearance Rotary™ Cutters.

• The low profile design of these cutters requires only 5” (127 mm) clearance.
• Excellent for cold cuts.
• Pipe snaps off squarely once the operator completes the cut.

• Application:
• Steel/Stainless Steel Sch. 40  
• Pipe Capacity: Steel Nominal 6" - 8" 
• Cutter Wheel: RCS8-36
• Length: 58"
• Weight: 43 lbs

Cut pipe quickly and with minimal digging using REED Low Clearance Rotary™ Cutters.

• Cutter is equipped with RCX Cutter Wheels and special RC8-30XR Outboard Rollers. 
• This enables it to cut thicker wall steel and stainless steel pipe as the RCX Cutter Wheel has a .800" (20.3 mm) blade exposure.

• Application:
• Steel/Stainless Steel Sch. 40 & 80
• Pipe Capacity: Steel Nominal 6" - 8" 
• Cutter Wheel: RCX
• Length: 58"
• Weight: 43 lbs

PLAS In-Line Rotary™ Cutters are excellent for cutting PVC pipe in trench or above ground. 

PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.

• Pipe Diameter: 6" - 12"
• Application: PVC Sch. 40, PVC C900 & C905
• Sections Used: A, B, C

For cutting PVC pipe, the long-lasting carbide-tipped blades penetrate up to a 2” wall thickness.

• Safe to use as it creates no dust and chips fall where they are cut. There is no danger of chips being blown well into pipe.
• Only 6"-8" clearance needed to turn PLAS tool around pipe.
• Cuts out-of-round pipe because of spring loaded nuts.
• Simultaneously cut and bevel PVC using cut-off blade and bevel blade.
• This is an inexpensive tool for contractors to use to make a cut for a tie-in or pipe break and then get the line back in use. Reduce overall labor costs.

PLAS In-Line Rotary™ Cutters are excellent for cutting PE / HDPE pipe in trench or above ground. 

PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.

• Pipe Diameter: 6" - 12"
• Application: PE, HDPE
• Sections Used: A, B, C

PLAS Cutter Specific Limitations for PE:
up to 14" pipe (355 mm) - 2" (51 mm) wall thickness
up to 18" pipe (500 mm) - 1 1/2" (38 mm) wall thickness
up to 28" pipe (800 mm) - 1" (25.4 mm) wall thickness

• Safe to use as it creates no dust and chips fall where they are cut. There is no danger of chips being blown well into pipe.
• Only 6"-8" clearance needed to turn PLAS tool around pipe.
• Cuts out-of-round pipe because of spring loaded nuts.
• Simultaneously cut and bevel PE using cut-off blade and bevel blade.
• This is an inexpensive tool for contractors to use to make a cut for a tie-in or pipe break and then get the line back in use. Reduce overall labor costs.

PLAS In-Line Rotary™ Cutters are excellent for cutting PVC pipe in trench or above ground. 

PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.

• Pipe Diameter: 14" - 18"
• Application: PVC Sch. 40, PVC C900 & C905
• Sections Used: B, C (2), D

For cutting PVC pipe, the long-lasting carbide-tipped blades penetrate up to a 2” wall thickness.

• Safe to use as it creates no dust and chips fall where they are cut. There is no danger of chips being blown well into pipe.
• Only 6"-8" clearance needed to turn PLAS tool around pipe.
• Cuts out-of-round pipe because of spring loaded nuts.
• Simultaneously cut and bevel PVC using cut-off blade and bevel blade.
• This is an inexpensive tool for contractors to use to make a cut for a tie-in or pipe break and then get the line back in use. Reduce overall labor costs.

PLAS In-Line Rotary™ Cutters are excellent for cutting PE / HDPE pipe in trench or above ground. 

PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.

• Pipe Diameter: 14" - 18"
• Application: PE, HDPE
• Sections Used: B, C (2), D

PLAS Cutter Specific Limitations for PE:
up to 14" pipe (355 mm) - 2" (51 mm) wall thickness
up to 18" pipe (500 mm) - 1 1/2" (38 mm) wall thickness
up to 28" pipe (800 mm) - 1" (25.4 mm) wall thickness

• Safe to use as it creates no dust and chips fall where they are cut. There is no danger of chips being blown well into pipe.
• Only 6"-8" clearance needed to turn PLAS tool around pipe.
• Cuts out-of-round pipe because of spring loaded nuts.
• Simultaneously cut and bevel PE using cut-off blade and bevel blade.
• This is an inexpensive tool for contractors to use to make a cut for a tie-in or pipe break and then get the line back in use. Reduce overall labor costs.

PLAS In-Line Rotary™ Cutters are excellent for cutting PVC pipe in trench or above ground. 

PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.

• Pipe Diameter: 14" - 24"
• Application: PVC Sch. 40, PVC C900 & C905
• Sections Used: B, C (3), D

For cutting PVC pipe, the long-lasting carbide-tipped blades penetrate up to a 2” wall thickness.

• Safe to use as it creates no dust and chips fall where they are cut. There is no danger of chips being blown well into pipe.
• Only 6"-8" clearance needed to turn PLAS tool around pipe.
• Cuts out-of-round pipe because of spring loaded nuts.
• Simultaneously cut and bevel PVC using cut-off blade and bevel blade.
• This is an inexpensive tool for contractors to use to make a cut for a tie-in or pipe break and then get the line back in use. Reduce overall labor costs.

PLAS In-Line Rotary™ Cutters are excellent for cutting PE / HDPE pipe in trench or above ground. 

PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.

• Pipe Diameter: 14" - 24"
• Application: PE, HDPE
• Sections Used: B, C (3), D

PLAS Cutter Specific Limitations for PE:
up to 14" pipe (355 mm) - 2" (51 mm) wall thickness
up to 18" pipe (500 mm) - 1 1/2" (38 mm) wall thickness
up to 28" pipe (800 mm) - 1" (25.4 mm) wall thickness

• Safe to use as it creates no dust and chips fall where they are cut. There is no danger of chips being blown well into pipe.
• Only 6"-8" clearance needed to turn PLAS tool around pipe.
• Cuts out-of-round pipe because of spring loaded nuts.
• Simultaneously cut and bevel PE using cut-off blade and bevel blade.
• This is an inexpensive tool for contractors to use to make a cut for a tie-in or pipe break and then get the line back in use. Reduce overall labor costs.

PLAS In-Line Rotary™ Cutters are excellent for cutting PVC pipe in trench or above ground. 

PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.

• Pipe Diameter: 14" - 28"
• Application: PVC Sch. 40, PVC C900 & C905
• Sections Used: B, C (4), D

For cutting PVC pipe, the long-lasting carbide-tipped blades penetrate up to a 2” wall thickness.

• Safe to use as it creates no dust and chips fall where they are cut. There is no danger of chips being blown well into pipe.
• Only 6"-8" clearance needed to turn PLAS tool around pipe.
• Cuts out-of-round pipe because of spring loaded nuts.
• Simultaneously cut and bevel PVC using cut-off blade and bevel blade.
• This is an inexpensive tool for contractors to use to make a cut for a tie-in or pipe break and then get the line back in use. Reduce overall labor costs.

PLAS In-Line Rotary™ Cutters are excellent for cutting PE / HDPE pipe in trench or above ground. 

PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.

• Pipe Diameter: 14" - 28"
• Application: PE, HDPE
• Sections Used: B, C (4), D

PLAS Cutter Specific Limitations for PE:
up to 14" pipe (355 mm) - 2" (51 mm) wall thickness
up to 18" pipe (500 mm) - 1 1/2" (38 mm) wall thickness
up to 28" pipe (800 mm) - 1" (25.4 mm) wall thickness

• Safe to use as it creates no dust and chips fall where they are cut. There is no danger of chips being blown well into pipe.
• Only 6"-8" clearance needed to turn PLAS tool around pipe.
• Cuts out-of-round pipe because of spring loaded nuts.
• Simultaneously cut and bevel PE using cut-off blade and bevel blade.
• This is an inexpensive tool for contractors to use to make a cut for a tie-in or pipe break and then get the line back in use. Reduce overall labor costs.

PLAS Hand-over-Hand Rotary™ Cutters are excellent for cutting PVC pipe in trench or above ground. 

PLAS Hand-over-Hand Rotary™ Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.

• Pipe Diameter: 4" - 8"
• Application: PVC Sch. 40, PVC C900 & C905
• Sections Used: E (2)

For cutting PVC pipe, the long-lasting carbide-tipped blades penetrate up to a 2” wall thickness.

• Excellent for cutting PVC pipe in-trench or above ground.
• Attached handles permit fast hand-turning – about half the cutting time of a regular PLAS cutter.
• Leaves a disposable remnant (not dust or chips) that is easy to recycle.
• Simultaneously cut and bevel PVC using cut-off blade and bevel blade.
• Simple to transport and fast to use.

PLAS Hand-over-Hand Rotary™ Cutters are excellent for cutting PVC pipe in trench or above ground. 

PLAS Hand-over-Hand Rotary™ Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.

• Pipe Diameter: 4" - 12"
• Application: PVC Sch. 40, PVC C900 & C905
• Sections Used: E (2), B (1)

For cutting PVC pipe, the long-lasting carbide-tipped blades penetrate up to a 2” wall thickness.

• Excellent for cutting PVC pipe in-trench or above ground.
• Attached handles permit fast hand-turning – about half the cutting time of a regular PLAS cutter.
• Leaves a disposable remnant (not dust or chips) that is easy to recycle.
• Simultaneously cut and bevel PVC using cut-off blade and bevel blade.
• Simple to transport and fast to use.