Ashland EP40M1-20 Pump

Ashland EP40M1-20 Pump

  • SKU: EP40M1-20
  • Brand:

  • Product Description:

    Effluent submersible pumps for septic systems.

    • Heavy duty cast iron construction
    • Oil-filled continuous duty PSC motor
    • Upper and lower ball bearing construction
    • Cast iron vortex impeller, 3/4" solids handing
    • 115 volt
    • 20 foot cord
    • Available in automatic or nonautomatic operation
    • Technical information available in the Specifications Library

Liberty Ascent II Macerating Toilet System

Liberty Ascent II Macerating Toilet System

  • SKU: ASCENTII
  • Brand:

  • Product Description:

    The complete system for convenient addition of a bathroom in remodeling projects and additions. Powerful macerating system pumps waste to existing sewer lines in the building or home—*up to 25' high and 150' horizontally. Accepts additional lavatory and tub/shower connections for a complete bathroom anywhere! *Horizontal distance can vary with amount of vertical pumping head. Consult factory for additional sizing and performance information.

    Performance

    Powerful and quiet, the RazorCutTM system with stainless-steel blades provides superior cutting compared to other macerating toilets.

    Appearance

    Clean, compact, and modular. The CleanConnect seal system eliminates unsightly rubber couplers for connecting the toilet to the macerator unit. Rear exiting discharge and vent connectors conceal piping when exiting directly to a wall.

    Serviceability

    Designed with a removable access cover, the AscentTM II is completely serviceable without removing the macerating unit from the toilet or disconnecting plumbing!

    Functionality

    LEDs inform of power ON, alarm condition, and low battery condition. Touchpad buttons allow manual by-pass operation of the unit and alarm silencing.

    Review Specifications for full details.


Zoeller M161 Pump

Zoeller M161 Pump

  • SKU: ZOELLERM161
  • Brand:

  • Product Description:

    Our 160 Series pumps are robust, high-performance solutions suitable for various commercial applications, including septic tanks, low-pressure pipes (LPP), or enhanced flow STEP systems.

    These heavy-duty sump and effluent pumps are constructed from durable cast iron with a corrosion-resistant, powder-coated epoxy finish. Together with their no-clog vortex impeller, these elements give you a commercial sump pump you can count on for smooth, reliable operation.

    Whether you choose an automatic or nonautomatic configuration, you can expect these pumps to maintain 3,450 rpm and pump out 100 gallons per minute. Each device we offer undergoes rigorous computerized testing and comes with a one-year limited warranty to give you peace of mind.

    Other features include:

    • A max temperature of 130 degrees Fahrenheit.
    • The ability to pass ¾-inch spherical solids.
    • Hermetic seals.
    • High Head Flow-Mate 160 Series
    • Durable, cast iron constructed switch case, base, motor and pump housing
    • Available in automatic or nonautomatic operation
    • The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with non automatic pumps.

Zoeller M267 Pump

Zoeller M267 Pump

Zoeller M53 Pump

Zoeller M53 Pump

Zoeller M57 Pump

Zoeller M57 Pump

Zoeller M98 Pump

Zoeller M98 Pump

  • SKU: ZOELLERM98
  • Brand:

  • Product Description:

    Zoeller Pump Company’s Model 98 Sump Pumps can offer protection and prevent flooding after heavy rainfall or storms. Underneath your structure, pits collect water. If the water level reaches a certain point, automatic or manual settings on the machine can efficiently pump that water away from your property’s foundation. How often the pump runs depends on the amount of moisture in the space.

    A corrosion-resistant finish over cast iron construction provides incredible strength and durability, and stainless steel screws assembling the seal, arm, handle, and guard stave off rust. The pump uses a 1 ½-inch discharge pipe and can pass spherical solids up to ½ inch in diameter. The lack of screen keeps the unit running smoothly.

    We offer accessories such as alarm systems with simplex or duplex control panels designed to keep you informed about your sump pump’s water level. The alarm gives you peace of mind that your pump is operating as intended.

    • Corrosion-resistant, powder coated epoxy finish
    • Durable, cast iron construction
    • Cast iron switch case, motor and pump housing
    • Engineered thermoplastic base
    • No sheet metal parts to rust or corrode
    • All castings are cast iron class 25-30 25000# tensile strength
    • Stainless steel screws, guard, handle, arm and seal assembly
    • Float-operated 2-pole mechanical switch
    • Permanent split capacitor motor, oil-filled and hermetically-sealed, automatic reset thermal overload protection
    • Bearings – upper and lower oil-fed cast iron
    • Carbon and ceramic shaft seal
    • Entire unit pressure-tested after assembly
    • Watertight, neoprene square ring between motor and pump housing
    • Maximum temperature for effluent or dewatering: 130 °F (54 °C)
    • Passes 1/2” (13 mm) spherical solids
    • No screens to clog
    • 1-1/2” NPT discharge (1-1/2” x 2” PVC adapter included with BN and BE Models)
    • On point: 9-1/2” (24 cm)
    • Off point: 3” (8 cm)
    • Major width: 10-1/8″ (25.7 cm)
    • Major height: 12″ (30 cm)
    • Simplex and duplex systems available
    • Packaged systems available
    • Automatic and non-automatic available
    • Available with piggyback variable level float switch
    • 3 year limited warranty

    Consult Factory for Special Applications

    Electrical alternators for duplex systems are available and supplied with an alarm Mechanical alternators for duplex systems are available with or without alarm switches Variable level float switches are available for controlling single and three phase systems Double piggyback, variable level  float switches are available for variable level long cycle controls. Refer to FM1922 and FM0806 for temperatures above 130 °F (54 °C)

    Notes
    The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with non-automatic pumps.


Zoeller N137 Pump

Zoeller N137 Pump

  • SKU: ZOELLERN137
  • Brand:

  • Product Description:

    Effluent or dewatering submersible pump for septic tank, low pressure pipe (LPP) and enhanced flow STEP systems.

    • Flow-Mate 130 Series
    • Durable, cast iron construction - switch case motor and pump housing, base and impeller
    • Available in automatic or nonautomatic operation
    • The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with non automatic pumps.

Zoeller N140 Pump

Zoeller N140 Pump

  • SKU: ZOELLERN140
  • Brand:

  • Product Description:

    Effluent or dewatering submersible pump for septic tank, low pressure pipe (LPP) and enhanced flow STEP systems.

    • Flow-Mate 140 Series
    • Durable, cast iron construction
    • Available in automatic or nonautomatic operation
    • The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with non automatic pumps.

Zoeller N151 Pump

Zoeller N151 Pump

Zoeller N152 Pump

Zoeller N152 Pump

Zoeller N153 Pump

Zoeller N153 Pump