Anti-Seep Collars

PURCHASE FROM OUR STORE

2' x 2' Anti-Seep Collar (Gum Rubber)

  • SKU: AASC22
  • Brand: Agri Drain

  • Product Description:

    Keep your pipe from being washed out.

    • Works with any smooth wall pipe or corrugated plastic tubing
    • 3/16" gum rubber
    • Wood Frame
    Install in two easy steps:
    • Cut a round hole* in the rubber 33% smaller than your pipe size
    • Insert the pipe through the round hole in the rubber
    • *Cutting an X or slit will cause gum rubber to rip.  You must cut a round hole.

     


2' x 2' Anti-Seep Collar for 2" IPS PVC Pipe

  • SKU: ANTISEEP2X2X02
  • Brand: Scheib Drainage

  • Product Description:

    Anti-Seep collars are user friendly and can be installed during new pipe installation or around an existing pipe.

    • Help prevent your pipe from being washed out.
    • Constructed from durable 1/4" high density polyethylene plastic (HDPE)
    • Made with PVC Compression Coupling in the center for PVC IPS Pipe
    • Available in 4' x 4', 5' x 5' and 6' x 6' sizes.  
    • Shipping is included in the 48 contiguous states

    Installation Instructions:

    1. The pipe is placed through the compression coupler and tightened on both sides with a compression nut
    2. Backfill and hand tamp.

3' x 3' Anti-Seep Collar (Gum Rubber)

  • SKU: AASC33
  • Brand: Agri Drain

  • Product Description:

    Keep your pipe from being washed out.

    • Works with any smooth wall pipe or corrugated plastic tubing
    • 3/16" gum rubber
    • Wood Frame
    Install in two easy steps:
    • Cut a round hole* in the rubber 33% smaller than your pipe size
    • Insert the pipe through the round hole in the rubber
    • *Cutting an X or slit will cause gum rubber to rip.  You must cut a round hole.

4' x 4' Anti-Seep Collar (Gum Rubber)

  • SKU: AASC44
  • Brand: Agri Drain

  • Product Description:

    Keep your pipe from being washed out.

    • Works with any smooth wall pipe or corrugated plastic tubing
    • 3/16" gum rubber
    • Wood Frame
    Install in two easy steps:
    • Cut a round hole* in the rubber 33% smaller than your pipe size
    • Insert the pipe through the round hole in the rubber
    • *Cutting an X or slit will cause gum rubber to rip.  You must cut a round hole.

4' x 4' Anti-Seep Collar for 10" Pipe

  • SKU: ANTISEEP4X4X10
  • Brand: Scheib Drainage

  • Product Description:

    Anti-Seep collars are user friendly and can be installed during new pipe installation or around an existing pipe.

    • Help prevent your pipe from being washed out.
    • Constructed from durable 1/4" high density polyethylene plastic (HDPE)
    • Pre-cut and drilled with stainless steel bolts and bands.
    • Tools needed to assemble: Two small wrenches and a screwdriver.
    • Available for Corrugated Plastic, PVC and Steel Pipe
    • Available in 4' x 4', 5' x 5' and 6' x 6' sizes.  
    • Pipe Type and OD - Outside Diameter required
    • Shipping is included in the 48 contiguous states

    Installation Instructions:

    1. Apply tar or mastic to bottom half of collar and lay pipe on collar.
    2. Apply mastic to top half of collar and set in place lining up red stripes.
    3. Bolt two halves together.
    4. Install metal bands on split halves of collar.
    5. Tighten bolts and bands. 
    6. Apply mastic as needed for a good seal.
    7. Backfill and hand tamp.

4' x 4' Anti-Seep Collar for 12" Pipe

  • SKU: ANTISEEP4X4X12
  • Brand: Scheib Drainage

  • Product Description:

    Anti-Seep collars are user friendly and can be installed during new pipe installation or around an existing pipe.

    • Help prevent your pipe from being washed out.
    • Constructed from durable 1/4" high density polyethylene plastic (HDPE)
    • Pre-cut and drilled with stainless steel bolts and bands.
    • Tools needed to assemble: Two small wrenches and a screwdriver.
    • Available for Corrugated Plastic, PVC and Steel Pipe
    • Available in 4' x 4', 5' x 5' and 6' x 6' sizes.  
    • Pipe Type and OD - Outside Diameter required
    • Shipping is included in the 48 contiguous states

    Installation Instructions:

    1. Apply tar or mastic to bottom half of collar and lay pipe on collar.
    2. Apply mastic to top half of collar and set in place lining up red stripes.
    3. Bolt two halves together.
    4. Install metal bands on split halves of collar.
    5. Tighten bolts and bands. 
    6. Apply mastic as needed for a good seal.
    7. Backfill and hand tamp.

4' x 4' Anti-Seep Collar for 15" Pipe

  • SKU: ANTISEEP4X4X15
  • Brand: Scheib Drainage

  • Product Description:

    Anti-Seep collars are user friendly and can be installed during new pipe installation or around an existing pipe.

    • Help prevent your pipe from being washed out.
    • Constructed from durable 1/4" high density polyethylene plastic (HDPE)
    • Pre-cut and drilled with stainless steel bolts and bands.
    • Tools needed to assemble: Two small wrenches and a screwdriver.
    • Available for Corrugated Plastic, PVC and Steel Pipe
    • Available in 4' x 4', 5' x 5' and 6' x 6' sizes.  
    • Pipe Type and OD - Outside Diameter required
    • Shipping is included in the 48 contiguous states

    Installation Instructions:

    1. Apply tar or mastic to bottom half of collar and lay pipe on collar.
    2. Apply mastic to top half of collar and set in place lining up red stripes.
    3. Bolt two halves together.
    4. Install metal bands on split halves of collar.
    5. Tighten bolts and bands. 
    6. Apply mastic as needed for a good seal.
    7. Backfill and hand tamp.

4' x 4' Anti-Seep Collar for 18" Pipe

  • SKU: ANTISEEP4X4X18
  • Brand: Scheib Drainage

  • Product Description:

    Anti-Seep collars are user friendly and can be installed during new pipe installation or around an existing pipe.

    • Help prevent your pipe from being washed out.
    • Constructed from durable 1/4" high density polyethylene plastic (HDPE)
    • Pre-cut and drilled with stainless steel bolts and bands.
    • Tools needed to assemble: Two small wrenches and a screwdriver.
    • Available for Corrugated Plastic, PVC and Steel Pipe
    • Available in 4' x 4', 5' x 5' and 6' x 6' sizes.  
    • Pipe Type and OD - Outside Diameter required
    • Shipping is included in the 48 contiguous states

    Installation Instructions:

    1. Apply tar or mastic to bottom half of collar and lay pipe on collar.
    2. Apply mastic to top half of collar and set in place lining up red stripes.
    3. Bolt two halves together.
    4. Install metal bands on split halves of collar.
    5. Tighten bolts and bands. 
    6. Apply mastic as needed for a good seal.
    7. Backfill and hand tamp.

4' x 4' Anti-Seep Collar for 2" IPS PVC Pipe

  • SKU: ANTISEEP4X4X02
  • Brand: Scheib Drainage

  • Product Description:

    Anti-Seep collars are user friendly and can be installed during new pipe installation or around an existing pipe.

    • Help prevent your pipe from being washed out.
    • Constructed from durable 1/4" high density polyethylene plastic (HDPE)
    • Made with PVC Compression Coupling in the center for PVC IPS Pipe
    • Available in 4' x 4', 5' x 5' and 6' x 6' sizes.  
    • Shipping is included in the 48 contiguous states

    Installation Instructions:

    1. The pipe is placed through the compression coupler and tightened on both sides with a compression nut
    2. Backfill and hand tamp.

4' x 4' Anti-Seep Collar for 24" Pipe

  • SKU: ANTISEEP4X4X24
  • Brand: Scheib Drainage

  • Product Description:

    Anti-Seep collars are user friendly and can be installed during new pipe installation or around an existing pipe.

    • Help prevent your pipe from being washed out.
    • Constructed from durable 1/4" high density polyethylene plastic (HDPE)
    • Pre-cut and drilled with stainless steel bolts and bands.
    • Tools needed to assemble: Two small wrenches and a screwdriver.
    • Available for Corrugated Plastic, PVC and Steel Pipe
    • Available in 4' x 4', 5' x 5' and 6' x 6' sizes.  
    • Pipe Type and OD - Outside Diameter required
    • Shipping is included in the 48 contiguous states

    Installation Instructions:

    1. Apply tar or mastic to bottom half of collar and lay pipe on collar.
    2. Apply mastic to top half of collar and set in place lining up red stripes.
    3. Bolt two halves together.
    4. Install metal bands on split halves of collar.
    5. Tighten bolts and bands. 
    6. Apply mastic as needed for a good seal.
    7. Backfill and hand tamp.

4' x 4' Anti-Seep Collar for 4" Pipe

  • SKU: ANTISEEP4X4X04
  • Brand: Scheib Drainage

  • Product Description:

    Anti-Seep collars are user friendly and can be installed during new pipe installation or around an existing pipe.

    • Help prevent your pipe from being washed out.
    • Constructed from durable 1/4" high density polyethylene plastic (HDPE)
    • Pre-cut and drilled with stainless steel bolts and bands.
    • Tools needed to assemble: Two small wrenches and a screwdriver.
    • Available for Corrugated Plastic, PVC and Steel Pipe
    • Available in 4' x 4', 5' x 5' and 6' x 6' sizes.  
    • Pipe Type and OD - Outside Diameter required
    • Shipping is included in the 48 contiguous states

    Installation Instructions:

    1. Apply tar or mastic to bottom half of collar and lay pipe on collar.
    2. Apply mastic to top half of collar and set in place lining up red stripes.
    3. Bolt two halves together.
    4. Install metal bands on split halves of collar.
    5. Tighten bolts and bands. 
    6. Apply mastic as needed for a good seal.
    7. Backfill and hand tamp.

4' x 4' Anti-Seep Collar for 5" Pipe

  • SKU: ANTISEEP4X4X05
  • Brand: Scheib Drainage

  • Product Description:

    Anti-Seep collars are user friendly and can be installed during new pipe installation or around an existing pipe.

    • Help prevent your pipe from being washed out.
    • Constructed from durable 1/4" high density polyethylene plastic (HDPE)
    • Pre-cut and drilled with stainless steel bolts and bands.
    • Tools needed to assemble: Two small wrenches and a screwdriver.
    • Available for Corrugated Plastic, PVC and Steel Pipe
    • Available in 4' x 4', 5' x 5' and 6' x 6' sizes.  
    • Pipe Type and OD - Outside Diameter required
    • Shipping is included in the 48 contiguous states

    Installation Instructions:

    1. Apply tar or mastic to bottom half of collar and lay pipe on collar.
    2. Apply mastic to top half of collar and set in place lining up red stripes.
    3. Bolt two halves together.
    4. Install metal bands on split halves of collar.
    5. Tighten bolts and bands. 
    6. Apply mastic as needed for a good seal.
    7. Backfill and hand tamp.