Mitered Drain™ is perfect for use in hard to drain areas where lack of grade difference is a problem. Because of its sloped grate, water flows directly into the pipe eliminating the drop typical in conventional inlets allowing for better drainage in flat areas that need extra slope to achieve proper drainage.
For use with culverts, under sidewalks, in planter areas, creeks and swales or any difficult-to-drain location.
3:1 Slope
HDPE grates have UV inhibitor
Area of grate opening (165.1 sq. in.)
Set screws are type 300 stainless steel
Not recommended for traffic loads
Made in USA
Non-cancellable and non-returnable
3 NDS Pop-Up Emitter with Elbow & Corrugated adapter (Green)
Allows water to be diverted and released to water-safe areas away from structures, erosion-prone landscapes and poor drainage areas.
Permits water captured by grates, catch basins, channel drains, Flo-Well, downspouts and roof gutter systems to flow through the drainage pipe and away from structural foundations to safe or useful areas. For example, water can be routed from a low area next to a foundation to a water safe area such as a curbside drainage system.
Opened by the hydrostatic pressure of water flowing through the drain pipe. As flow diminishes the Emitter closes again. The special patented design allows the Emitter to open with a negligible amount of pressure. Since the Emitter is closed during dry weather, debris and rodents cannot enter the drain pipes.
Features
OVERALL TOP WIDTH 5 15/16"
Polyolefin Pop-Up Drainage Emitter with spring loaded center and UV inhibitor
Spring automatically retracts
PVC 90 degree elbow with drain hole or slot and HDPE Adapter #3PExDS
40 G.P.M.
Fits 3" Corrugated Pipe
Can be installed in vertical applications - ideal for discharging water from retaining walls and street curbs
May be used with Flo-Well to relieve overflow
3" & 4" NDS Pop-Up Emitter Only (Green) (Box of 20)
Allows water to be diverted and released to water-safe areas away from structures, erosion-prone landscapes and poor drainage areas.
Permits water captured by grates, catch basins, channel drains, Flo-Well, downspouts and roof gutter systems to flow through the drainage pipe and away from structural foundations to safe or useful areas. For example, water can be routed from a low area next to a foundation to a water safe area such as a curbside drainage system.
Opened by the hydrostatic pressure of water flowing through the drain pipe. As flow diminishes the Emitter closes again. The special patented design allows the Emitter to open with a negligible amount of pressure. Since the Emitter is closed during dry weather, debris and rodents cannot enter the drain pipes.
Features
OVERALL TOP WIDTH 5 15/16"
Polyolefin Pop-Up Drainage Emitter with spring loaded center and UV inhibitor
Spring automatically retracts
40 G.P.M.
Fits 3" and 4" Sewer and Drain Fittings
Can be installed in vertical applications - ideal for discharging water from retaining walls and street curbs
Also Available: Contractor Pack of 20 emitters NDS420_BX
Allows water to be diverted and released to water-safe areas away from structures, erosion-prone landscapes and poor drainage areas.
Permits water captured by grates, catch basins, channel drains, Flo-Well, downspouts and roof gutter systems to flow through the drainage pipe and away from structural foundations to safe or useful areas. For example, water can be routed from a low area next to a foundation to a water safe area such as a curbside drainage system.
Opened by the hydrostatic pressure of water flowing through the drain pipe. As flow diminishes the Emitter closes again. The special patented design allows the Emitter to open with a negligible amount of pressure. Since the Emitter is closed during dry weather, debris and rodents cannot enter the drain pipes.
Features
OVERALL TOP WIDTH 5 15/16"
Polyolefin Pop-Up Drainage Emitter with spring loaded center and UV inhibitor
Spring automatically retracts
40 G.P.M.
Fits 3" and 4" Sewer and Drain Fittings
Can be installed in vertical applications - ideal for discharging water from retaining walls and street curbs
May be used with Flo-Well to relieve overflow
3" NDS Pop-Up Emitter with SDR35 Elbow (Green) (Box of 25)
Allows water to be diverted and released to water-safe areas away from structures, erosion-prone landscapes and poor drainage areas.
Permits water captured by grates, catch basins, channel drains, Flo-Well, downspouts and roof gutter systems to flow through the drainage pipe and away from structural foundations to safe or useful areas. For example, water can be routed from a low area next to a foundation to a water safe area such as a curbside drainage system.
Opened by the hydrostatic pressure of water flowing through the drain pipe. As flow diminishes the Emitter closes again. The special patented design allows the Emitter to open with a negligible amount of pressure. Since the Emitter is closed during dry weather, debris and rodents cannot enter the drain pipes.
Features
OVERALL TOP WIDTH 5 15/16"
Polyolefin Pop-Up Drainage Emitter with spring loaded center and UV inhibitor
Spring automatically retracts
PVC 90 degree elbow with drain hole or slot
40 G.P.M.
Fits 3" Sewer and Drain Pipe
Can be installed in vertical applications - ideal for discharging water from retaining walls and street curbs
May be used with Flo-Well to relieve overflow
321 - 322GB
3" NDS Pop-Up Emitter with SDR35 Elbow (Green) (Each)
Also Available: Contractor Pack of 25 emitters NDS321_BX
Permits water captured by grates, catch basins, channel drains, Flo-Well, downspouts and roof gutter systems to flow through the drainage pipe and away from structural foundations to safe or useful areas. For example, water can be routed from a low area next to a foundation to a water safe area such as a curbside drainage system.
Opened by the hydrostatic pressure of water flowing through the drain pipe. As flow diminishes the Emitter closes again. The special patented design allows the Emitter to open with a negligible amount of pressure. Since the Emitter is closed during dry weather, debris and rodents cannot enter the drain pipes.
Features
OVERALL TOP WIDTH 5 15/16"
Polyolefin Pop-Up Drainage Emitter with spring loaded center and UV inhibitor
Spring automatically retracts
PVC 90 degree elbow with drain hole or slot
40 G.P.M.
Fits 3" Sewer and Drain Pipe
Can be installed in vertical applications - ideal for discharging water from retaining walls and street curbs
Mitered Drain™ is perfect for use in hard to drain areas where lack of grade difference is a problem. Because of its sloped grate, water flows directly into the pipe eliminating the drop typical in conventional inlets allowing for better drainage in flat areas that need extra slope to achieve proper drainage.
For use with culverts, under sidewalks, in planter areas, creeks and swales or any difficult-to-drain location.
Light Duty retail / consumer model
DIFFERENT DISCHARGE DESIGN THAN THE CONTRACTOR GRADE GRAY AND BLACK MODELS
Mitered Drain™ is perfect for use in hard to drain areas where lack of grade difference is a problem. Because of its sloped grate, water flows directly into the pipe eliminating the drop typical in conventional inlets allowing for better drainage in flat areas that need extra slope to achieve proper drainage.
For use with culverts, under sidewalks, in planter areas, creeks and swales or any difficult-to-drain location.
Light Duty retail / consumer model
DIFFERENT DISCHARGE DESIGN THAN THE CONTRACTOR GRADE GRAY AND BLACK MODELS
Mitered Drain™ is perfect for use in hard to drain areas where lack of grade difference is a problem. Because of its sloped grate, water flows directly into the pipe eliminating the drop typical in conventional inlets allowing for better drainage in flat areas that need extra slope to achieve proper drainage.
For use with culverts, under sidewalks, in planter areas, creeks and swales or any difficult-to-drain location.
Mitered Drain™ is perfect for use in hard to drain areas where lack of grade difference is a problem. Because of its sloped grate, water flows directly into the pipe eliminating the drop typical in conventional inlets allowing for better drainage in flat areas that need extra slope to achieve proper drainage.
For use with culverts, under sidewalks, in planter areas, creeks and swales or any difficult-to-drain location.
3:1 Slope
HDPE grates have UV inhibitor
Area of grate opening (10.4 sq. in.)
Set screws are type 300 stainless steel
Not recommended for traffic loads
Made in USA
4" NDS Pop-Up Emitter with Elbow & Corrugated adapter (Green)
Allows water to be diverted and released to water-safe areas away from structures, erosion-prone landscapes and poor drainage areas.
Permits water captured by grates, catch basins, channel drains, Flo-Well, downspouts and roof gutter systems to flow through the drainage pipe and away from structural foundations to safe or useful areas. For example, water can be routed from a low area next to a foundation to a water safe area such as a curbside drainage system.
Opened by the hydrostatic pressure of water flowing through the drain pipe. As flow diminishes the Emitter closes again. The special patented design allows the Emitter to open with a negligible amount of pressure. Since the Emitter is closed during dry weather, debris and rodents cannot enter the drain pipes.
Features
OVERALL TOP WIDTH 5 15/16"
Polyolefin Pop-Up Drainage Emitter with spring loaded center and UV inhibitor
Spring automatically retracts
PVC 90 degree elbow with drain hole or slot and HDPE Adapter #4PExDS
40 G.P.M.
Fits 4" Corrugated Pipe
Can be installed in vertical applications - ideal for discharging water from retaining walls and street curbs
May be used with Flo-Well to relieve overflow
4" NDS Pop-Up Emitter with Elbow & Univ. Adapter (Green) (Box of 20)
Permits water captured by grates, catch basins, channel drains, Flo-Well, downspouts and roof gutter systems to flow through the drainage pipe and away from structural foundations to safe or useful areas. For example, water can be routed from a low area next to a foundation to a water safe area such as a curbside drainage system.
Opened by the hydrostatic pressure of water flowing through the drain pipe. As flow diminishes the Emitter closes again. The special patented design allows the Emitter to open with a negligible amount of pressure. Since the Emitter is closed during dry weather, debris and rodents cannot enter the drain pipes.
Features
OVERALL TOP WIDTH 5 15/16"
Polyolefin Pop-Up Drainage Emitter with spring loaded center and UV inhibitor
Spring automatically retracts
PVC 90 degree elbow with drain hole or slot and Universal Adapter #1241
