Reed Groovers, Power Drives Threaders & Dies

PURCHASE FROM OUR STORE

O55GD Threadguard Dark Cutting Oil (55 Gallon) 06124

  • SKU: O55GD
  • Brand: Reed Manufacturing
  • Product Description:

    ACTUAL PICTURE NOT SHOWN - MUST SHIP VIA TRUCK LINE

    REED Threadguard Cutting Oil was developed by thousands of actual work-condition tests by Reed and oil company laboratories. It is specifically formulated for cooling the work, prolonging die life, and increasing cutting speed for both machine and hand threading.

    • Successful hand and machine threading depends on this quality cutting oil.
    OIL OPTIONS
    • OQD         Quart Dark Oil
    • OGD         Gallon Dark Oil
    • O55GD    55 Gallon Dark Oil
    • OQC         Quart Clear Oil
    • OGC         Gallon Clear Oil
    • O55GC    55 Gallon Clear Oil

Reed 5301PD Power Drive 38 RPM 05301

  • SKU: 5301PD
  • Brand: Reed Manufacturing
  • Product Description:

    Power Drive 38 RPM, 120V with Footswitch only

    REED’s 5301PD Power Drive rotates the pipe while cutting, threading, or reaming operations are performed on up to 2” diameter pipe or bolt. The flat housing top provides a handy workspace. 

    5301PD is approved to the latest US and CSA Canada standards!

     

    • 5301PDCOMP "complete" comes with HSS (High Speed Steel) Universal Dies versus the competitor’s alloy steel dies.
    • Also available in 240V by special order.  The 240V power drive models offer higher torque to thread faster. (This is especially noticeable on 2” pipe jobs.) 
    • REED also offers 5301PDCOMP complete models including a tripod, transporter, carriage, reamer, pipe cutter, universal die head, high speed steel (HSS) universal dies, oiler and cutting oil.
    • Capacity:  1/8" - 2" Pipe   &   1/4" - 2" Bolt


    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Reed 5301PDCOMP Power Drive Complete 38 RPM 05303

  • SKU: 5301PDCOMP
  • Brand: Reed Manufacturing
  • Product Description:

    Power Drive Complete 38 RPM, 120V, NPT Dies

    REED 5301PDCOMP complete models include a tripod, transporter, carriage, reamer, pipe cutter, universal die head, high speed steel (HSS) universal dies, oiler and cutting oil.

    REED’s 5301PD Power Drive rotates the pipe while cutting, threading, or reaming operations are performed on up to 2” diameter pipe or bolt. The flat housing top provides a handy workspace. 

    5301PD is approved to the latest US and CSA Canada standards!

     

    • 5301PDCOMP "complete" comes with HSS (High Speed Steel) Universal Dies versus the competitor’s alloy steel dies.
    • Also available in 240V by special order.  The 240V power drive models offer higher torque to thread faster. (This is especially noticeable on 2” pipe jobs.) 
    • Capacity:  1/8" - 2" Pipe   &   1/4" - 2" Bolt

    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Reed 5401CRT Pipe Threading Machine Cart 06670

  • SKU: 5401CRT
  • Brand: Reed Manufacturing
  • Product Description:

    Cart for 5401TMSO Pipe Threading Machine

    REED’s 5401CRT cart makes transport of the pipe threading machine easy. The heavy-duty cart is fabricated from steel tubing. The cart handles slide in to keep them out of the way when space is an issue.

    It has an exclusive feature caster which is on the same end of the cart as the handles.

    The caster’s crank handle allows the cart to be moved up and down so that, if desired, the cart can be pushed around instead of lifted and pushed like a wheelbarrow.

    The cart also features an anti-tip front bar mechanism and a heavy duty steel (not plastic) storage tray.

    The cart fits the REED 5401TMSO Pipe Threading Machine or RIDGID® 300 Compact, 1224, 1233, 1822, 535, or 535A/585 Manual. ASSEMBLY REQUIRED of cart.

    Height: 27.5"

    Width: 26"

    Length: 40" Handle In  & 57" Handle Out

    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Reed 5401TMSO Pipe Threading Machine 120V 05365

  • SKU: 5401TMSO
  • Brand: Reed Manufacturing
  • Product Description:

    Pipe Threading Machine 1/2 HP, 120V single phase 60Hz, NPT Dies

    REED’s ½ horsepower, electric-motor-driven Pipe Threading Machine centers and chucks pipe and conduit and rotates it while cutting, threading, and reaming operations are performed.

    Its oil system features a self-priming pump that generously floods the pipe with oil while threading. Convenient open work space features a large, integral oil reservoir and an easy-to-remove, metal chip collection tray.

    Threading capacity for bolt is ¼” – 2” and for pipe is 1/8” – 2” nominal.

    There’s plenty of carriage travel (8 1/2") and carriage clearance.

    Three-spoke handwheel with a gear and rack system easily moves the carriage and starts the dies onto the pipe for threading.

    System includes pipe threading machine, foot pedal, legs, R811 Universal Die Head, 1 gallon of Threadguard Cutting Oil, and two set of High Speed Steel (not alloy!) Universal Dies: ½” – ¾” and 1” – 2” NPT.

    • Self-priming pump generously floods the pipe with oil while threading. 
    • Convenient open work space features a large, integral oil reservoir and an easy-to-remove chip collection tray.
    • Three-spoke handwheel easily moves the carriage and starts the dies for threading.
    • Centers and chucks pipe and conduit and rotates it for cutting, threading, and reaming operations.
    • Capacity:   Pipe: 1/8" - 2"     &     Bolt: 1/4" - 2"    Depending on dies

    Not available for sale in China.

    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Reed 5401TMSOENPT Pipe Threading Machine 240V 05368

  • SKU: 5401TMSOENPT
  • Brand: Reed Manufacturing
  • Product Description:

    Pipe Threading Machine 1/2 HP, 240V single phase 60Hz, NPT Dies

    REED’s ½ horsepower, electric-motor-driven Pipe Threading Machine centers and chucks pipe and conduit and rotates it while cutting, threading, and reaming operations are performed.

    Its oil system features a self-priming pump that generously floods the pipe with oil while threading. Convenient open work space features a large, integral oil reservoir and an easy-to-remove, metal chip collection tray.

    Threading capacity for bolt is ¼” – 2” and for pipe is 1/8” – 2” nominal.

    There’s plenty of carriage travel (8 1/2") and carriage clearance.

    Three-spoke handwheel with a gear and rack system easily moves the carriage and starts the dies onto the pipe for threading.

    System includes pipe threading machine, foot pedal, legs, R811 Universal Die Head, 1 gallon of Threadguard Cutting Oil, and two set of High Speed Steel (not alloy!) Universal Dies: ½” – ¾” and 1” – 2” NPT.

    • Self-priming pump generously floods the pipe with oil while threading. 
    • Convenient open work space features a large, integral oil reservoir and an easy-to-remove chip collection tray.
    • Three-spoke handwheel easily moves the carriage and starts the dies for threading.
    • Centers and chucks pipe and conduit and rotates it for cutting, threading, and reaming operations.
    • Capacity:   Pipe: 1/8" - 2"     &     Bolt: 1/4" - 2"    Depending on dies

    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Reed 601PD Electric Power Drive 05240

  • SKU: 601PD
  • Brand: Reed Manufacturing
  • Product Description:

    Power Drive & Safety Arm, 110-120 volts, 50/60 Hz, with Case

    601PD Power Drive weighs only 15.4 pounds, yet delivers plenty of torque for threading through 1 1/4” pipe.

    A safety arm is always included, as is a carrying case.

    No load forward speed is 25 RPM, with a fast reverse switch that allows 60 RPM backoff to expedite jobs.

    The REVERSE button on the power drive is used to properly and quickly remove the threader drophead or die head from the pipe that has just been threaded. (There is no threading done in the REVERSE position.)

    • Electric power (115V) used to thread pipe; a great alternative to hand-threading.
    • The lightest power drive on the market.
    • Safety arm and carrying case included.
    • R11 Enclosed Dropheads sold separately.
    • CSA and CE approved.
    • Capacity:  1/4" -  1 1/4"

Reed 601PDKIT1-1/4 Electric Power Drive Kit 05245

  • SKU: 601PDKIT1-14
  • Brand: Reed Manufacturing
  • Product Description:

    Power Drive & Safety Arm, 110-120 volts, 50/60 Hz, four R11 Dropheads for 1/2" - 1 1/4" NPT, with Case

    601PD Power Drive weighs only 15.4 pounds, yet delivers plenty of torque for threading through 1 1/4” pipe.

    A safety arm is always included, as is a carrying case.

    No load forward speed is 25 RPM, with a fast reverse switch that allows 60 RPM backoff to expedite jobs.

    The REVERSE button on the power drive is used to properly and quickly remove the threader drophead or die head from the pipe that has just been threaded. (There is no threading done in the REVERSE position.)

    • Electric power (115V) used to thread pipe up to 1-1/4" with included dropheads.
    • The lightest power drive on the market.
    • Safety arm and carrying case included.
    • A great alternative to hand-threading.
    • CSA and CE approved.
    • Capacity:  1/2" -  1 1/4"

Reed 700APD Pneumatic Power Drive 05260

  • SKU: 700APD
  • Brand: Reed Manufacturing
  • Product Description:

    Power Drive, Pneumatic, 28 RPM, 4 HP motor (Not included: Tripod, FRL & OLBUCK1 Sold Separately)

    The 700APD Power Drive is a portable, pneumatic-motor-driven, heavy-duty power drive which provides power for threading pipe and conduit up to 2” (50 mm) where electric shock or sparks from an electric tool are hazardous.

    It uses REED R12+ Segmental Dies and Dropheads or RIDGID® brand 12R dies and dropheads.

    The 700APD has a 4 horsepower pneumatic motor, turns at 28 rpm no load and provides a pneumatic forward/neutral/reverse valve and dead man's switch.

    REED’s 700APD has a maximum torque of 400 lb-ft.  Add the optional Safety Arm to absorb the forces generated when threading.  Safety arm provides stability and frees up the operator to oil the dies during threading.

    Also, the 700APD power drive can be used to power tapping and drilling machines by adding a REED Power Drive Adapter. 

    NOTE: Always use a filter-regulator-lubricator (FRL) with REED pneumatic tools. REED offers FRL #97591 for user convenience.

    • Pneumatic-powered for use on jobsites requiring air power tools.
    • Useful for threading pipe and exercising valves in an environment where electric shock or sparks from an electric tool are hazardous.
    • Capacity:  1/8" - 2" NPT  (R12+ Dropheads Sold Separately)
    • Air Consumption: 80 CFM @ 90 PSI

Reed 700APDSET Pneumatic Power Drive 05262

  • SKU: 700APDSET
  • Brand: Reed Manufacturing
  • Product Description:

    Power Drive, Pneumatic, 28 RPM, 4 HP motor with six R12+ Dropheads for 1/2" - 2" NPT (Not included: Tripod, FRL & OLBUCK1 Sold Separately)

    The 700APD Power Drive is a portable, pneumatic-motor-driven, heavy-duty power drive which provides power for threading pipe and conduit up to 2” (50 mm) where electric shock or sparks from an electric tool are hazardous.

    It uses REED R12+ Segmental Dies and Dropheads or RIDGID® brand 12R dies and dropheads.

    The 700APD has a 4 horsepower pneumatic motor, turns at 28 rpm no load and provides a pneumatic forward/neutral/reverse valve and dead man's switch.

    REED’s 700APD has a maximum torque of 400 lb-ft.  Add the optional Safety Arm to absorb the forces generated when threading.  Safety arm provides stability and frees up the operator to oil the dies during threading.

    Also, the 700APD power drive can be used to power tapping and drilling machines by adding a REED Power Drive Adapter. 

    NOTE: Always use a filter-regulator-lubricator (FRL) with REED pneumatic tools. REED offers FRL #97591 for user convenience.

    • Pneumatic-powered for use on jobsites requiring air power tools.
    • Useful for threading pipe and exercising valves in an environment where electric shock or sparks from an electric tool are hazardous.
    • Capacity:  1/8" - 2" NPT  (R12+ Dropheads Sold Separately)
    • Air Consumption: 80 CFM @ 90 PSI

Reed 700PD Power Drive 05270

  • SKU: 700PD
  • Brand: Reed Manufacturing
  • Product Description:

    Power Drive 120V, 60 Hz

    700PD Power Drive is a portable, electric, heavy-duty power drive that threads pipe and conduit up to 2” (50 mm) in diameter.

    700PD is 1/2 horsepower, double insulated, turns at 28 RPM (no load) and uses a forward/reverse switch.

    The REVERSE button on the power drive is used to properly and quickly remove the threader drophead or die head from pipe that has just been threaded. There is no threading done while in the REVERSE position.

    700PD uses REED R12+ Segmental Dies and Dropheads or Ridgid® 12R dies and dropheads. Add the optional Safety Arm to absorb the forces generated when threading.  Safety arm provides stability and frees up the operator to oil the dies during threading.

    Also, the 700PD power drive can be used to power tapping and drilling machines by adding a REED Power Drive Adapter.

    700PD is approved for the US and CSA Canada specs!

    RIDGID® is a registered trademark of Ridgid, Inc. and is not associated with Reed Manufacturing Company.

    • A workhorse model, designed for threading pipe and conduit up to 2” (50 mm) in diameter.
    • Vinyl-coated handle provides better electrical safety to the user.
    • Neoprene sealed switch helps keep dirt out and prolongs switch life.
    • Capacity:  1/8" - 2" NPT

    WARNING: Cancer - www.P65Warnings.ca.gov.

Reed 700PDSET Power Drive 05272

  • SKU: 700PDSET
  • Brand: Reed Manufacturing
  • Product Description:

    Power Drive 120V, 60 Hz, six R12+ Dropheads for 1/2" - 2" NPT

    700PD Power Drive is a portable, electric, heavy-duty power drive that threads pipe and conduit up to 2” (50 mm) in diameter.

    700PD is 1/2 horsepower, double insulated, turns at 28 RPM (no load) and uses a forward/reverse switch.

    The REVERSE button on the power drive is used to properly and quickly remove the threader drophead or die head from pipe that has just been threaded. There is no threading done while in the REVERSE position.

    700PD uses REED R12+ Segmental Dies and Dropheads or Ridgid® 12R dies and dropheads. Add the optional Safety Arm to absorb the forces generated when threading.  Safety arm provides stability and frees up the operator to oil the dies during threading.

    Also, the 700PD power drive can be used to power tapping and drilling machines by adding a REED Power Drive Adapter.

    700PD is approved for the US and CSA Canada specs!

    RIDGID® is a registered trademark of Ridgid, Inc. and is not associated with Reed Manufacturing Company.

     

    • A workhorse model, designed for threading pipe and conduit up to 2” (50 mm) in diameter.
    • Vinyl-coated handle provides better electrical safety to the user.
    • Neoprene sealed switch helps keep dirt out and prolongs switch life.
    • Capacity:  1/8" - 2" NPT

    WARNING: Cancer - www.P65Warnings.ca.gov.