Ideal for yard / area drains to collect surface water.

Features

• Manufactured from structurally foamed High Density Polyethylene (HDPE)
• UV Stabilized to protect from sun degradation
• Available in green and black
• Textured anti-skid surface
• 100 GPM
• Slot Width: 7/16"
• ADA Compliant
• Recommended for pedestrians traffic
• Made in USA

1. Maximum load based on weight uniformly applied across entire grate surface.  (2500 lbs.)

2. Due to wide manufacturing tolerances of Corrugated Pipe, this fit may not be perfect.

Fits

• 10" PVC SDR35 Pipe
• 10" PVC Schedule 40
• 10" HDPE Corrugated Pipe

Ideal for yard / area drains to collect surface water.

Features

• Manufactured from structurally foamed High Density Polyethylene (HDPE)
• UV Stabilized to protect from sun degradation
• Available in green and black
• Textured anti-skid surface
• 100 GPM
• Slot Width: 7/16"
• ADA Compliant
• Recommended for pedestrians traffic
• Made in USA

1. Maximum load based on weight uniformly applied across entire grate surface.  (2500 lbs.)

2. Due to wide manufacturing tolerances of Corrugated Pipe, this fit may not be perfect.

Fits

• 10" PVC SDR35 Pipe
• 10" PVC Schedule 40
• 10" HDPE Corrugated Pipe

Mitered Drain™ is perfect for use in hard to drain areas where lack of grade difference is a problem. Because of its sloped grate, water flows directly into the pipe eliminating the drop typical in conventional inlets allowing for better drainage in flat areas that need extra slope to achieve proper drainage.  

For use with culverts, under sidewalks, in planter areas, creeks and swales or any difficult-to-drain location.

• 3:1 Slope  
• HDPE grates have UV inhibitor
• Area of grate opening (165.1 sq. in.)
• Set screws are type 300 stainless steel
• Not recommended for traffic loads
• Made in USA
• Non-cancellable and non-returnable

Solid Cover / Lid that fits multiple types of pipe. 

Features

• Manufactured from structurally foamed High Density Polyethylene (HDPE)
• UV Stabilized to protect from sun degradation
• Textured anti-skid surface
• Lids include bolt holes to allow for securing to pipe (use #10 1.5” long Phillips flat head stainless steel screws)
• Recommended for pedestrians traffic
• Made in USA

1. Maximum load based on weight uniformly applied across entire grate surface.  (4000 lbs.)

2. Due to wide manufacturing tolerances of Corrugated Pipe, this fit may not be perfect.

Fits

• 12" PVC SDR35 Pipe
• 12" PVC Schedule 40
• 12" HDPE Corrugated Pipe
• 12" C76 Concrete Pipe

Domed cover ideal for access cover

• Fits 12" Corrugated Doublewall Pipe
• Pedestrian traffic ONLY

Ideal for access cover - Fits over 12" Corrugated Doublewall Pipe

Alternate Product in stock 12G

The SFRC12G, our septic tank riser cover, is constructed of injection molded polyethylene structural foam. Utilizing our Tech Tough^™ design technology, the SFRC12G can support up to 1,250 pounds. The cover comes with our replaceable water tight seal. Insulation is also an option for extreme climates. The SFRC12G comes with our non-slip Lawn Deco^™ decorative green finish.

Features and Benefits

• Adapts to all 12 in. PVC, single and double wall polyethylene riser pipes
• Natural green color - easily camouflaged by lawn and landscaping
• Strong and lightweight
• Replaceable water tight seal
• Customized logos available

Specifications:

• Diameter: 14.25 in.
• Bolt Circle: 12.25 in.
• Material: Injection Molded Polyethylene Structural Foam
• Application: Septic Systems
• * Not rated for vehicular loads including but not limited to cars, forklifts, and lawn mowers.

Solid Cover / Lid that fits multiple types of pipe. 

Features

• Manufactured from structurally foamed High Density Polyethylene (HDPE)
• UV Stabilized to protect from sun degradation
• Textured anti-skid surface
• Lids include bolt holes to allow for securing to pipe (use #10 1.5” long Phillips flat head stainless steel screws)
• Recommended for pedestrians traffic
• Made in USA

1. Maximum load based on weight uniformly applied across entire grate surface.  (6000 lbs.)

2. Due to wide manufacturing tolerances of Corrugated Pipe, this fit may not be perfect.

Fits

• 15" PVC SDR35 Pipe
• 15" HDPE Corrugated Pipe
• 15" C76 Concrete Pipe

Domed cover ideal for access cover

• Fits 15" Corrugated Doublewall Pipe
• Pedestrian traffic ONLY

Domed cover ideal for access cover

• Fits 18" Corrugated Doublewall Pipe
• Pedestrian traffic ONLY

Ideal for access cover - Fits over 18" Corrugated Doublewall Pipe

Alternate Product in stock 18G

The SFRC18G, our septic tank riser cover, is constructed of injection molded polyethylene structural foam. Utilizing our Tech Tough^™ design technology, the SFRC18G can support up to 1,250 pounds. The cover comes with our replaceable water tight seal. Insulation is also an option for extreme climates. The SFRC18G comes with our non-slip Lawn Deco^™ decorative green finish.

Features and Benefits

• Adapts to all 18 in. PVC, single and double wall polyethylene riser pipes
• Natural green color - easily camouflaged by lawn and landscaping
• Strong and lightweight
• Replaceable water tight seal
• Customized logos available

Specifications:

Diameter: 21.375 in.
Bolt Circle: 18.75 in.
Material: Injection Molded Polyethylene Structural Foam
Application: Septic Systems
* Not rated for vehicular loads including but not limited to cars, forklifts, and lawn mowers.

Domed cover ideal for access cover

• Fits 24" Corrugated Doublewall Pipe
• Pedestrian traffic ONLY

Ideal for access cover - Fits over 24" Corrugated Doublewall Pipe

The SFRC24B, our septic tank riser cover, is constructed of injection molded polyethylene structural foam. Utilizing our Tech Tough^™ design technology, the SFRC24B can support up to 1,250 pounds. The cover comes with our replaceable water tight seal. Insulation is also an option for extreme climates. The SFRC24B comes with our non-slip black finish.

Features and Benefits

• Adapts to all 24 in. PVC, single and double wall polyethylene riser pipes
• Strong and lightweight
• Replaceable water tight seal
• Customized logos available

Specifications:

Diameter: 26.5 in.
Bolt Circle: 24.25 in.
Material: Injection Molded Polyethylene Structural Foam
Application: Septic Systems

* Not rated for vehicular loads including but not limited to cars, forklifts, and lawn mowers.