Money-saving reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused.

• Reams 1" Sch. 40 PVC, CPVC & ABS Fittings
• Plastic Pipe Fitting Reamers fit into standard ½” drills.
• Shaft Size: 1/4" Hex
• PPR reamers work great for vent lines, drain lines, and water lines.
• Its carbide cutting insert provides a cutting edge on each side.
• Rotate before replacement and receive three bonus cutting edges.
• Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.

NOTE: REED plastic pipe reamers (Clean Ream Extreme® and Clean Ream Plus®) work with North America pipe diameters as they fit specific ID/OD for reaming work.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.

Money-saving reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused.

• Reams 1 1/4" Sch. 40 PVC, CPVC & ABS Fittings
• Plastic Pipe Fitting Reamers fit into standard ½” drills.
• Shaft Size: 3/8" Hex
• PPR reamers work great for vent lines, drain lines, and water lines.
• Its carbide cutting insert provides a cutting edge on each side.
• Rotate before replacement and receive three bonus cutting edges.
• Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.

NOTE: REED plastic pipe reamers (Clean Ream Extreme® and Clean Ream Plus®) work with North America pipe diameters as they fit specific ID/OD for reaming work.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.

Money-saving reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused.

• Reams 1 1/2" Sch. 40 PVC, CPVC & ABS Fittings
• Plastic Pipe Fitting Reamers fit into standard ½” drills.
• Shaft Size: 3/8" Hex
• PPR reamers work great for vent lines, drain lines, and water lines.
• Its carbide cutting insert provides a cutting edge on each side.
• Rotate before replacement and receive three bonus cutting edges.
• Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.

NOTE: REED plastic pipe reamers (Clean Ream Extreme® and Clean Ream Plus®) work with North America pipe diameters as they fit specific ID/OD for reaming work.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.

Money-saving reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused.

• Reams 2" Sch. 40 PVC, CPVC & ABS Fittings
• Plastic Pipe Fitting Reamers fit into standard ½” drills.
• Shaft Size: 3/8" Hex
• PPR reamers work great for vent lines, drain lines, and water lines.
• Its carbide cutting insert provides a cutting edge on each side.
• Rotate before replacement and receive three bonus cutting edges.
• Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.

NOTE: REED plastic pipe reamers (Clean Ream Extreme® and Clean Ream Plus®) work with North America pipe diameters as they fit specific ID/OD for reaming work.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.

Money-saving reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused.

• These hub savers fit 2 1/2 inch fittings commonly found in commercial pool and spas including water parks, theme parks, therapy pools at rehabilitation centers, colleges and universities.

• Reams 2 1/2" Sch. 40 PVC, CPVC & ABS Fittings
• Plastic Pipe Fitting Reamers fit into standard ½” drills.
• Shaft Size: 3/8" Hex
• PPR reamers work great for vent lines, drain lines, and water lines.
• Its carbide cutting insert provides a cutting edge on each side.
• Rotate before replacement and receive three bonus cutting edges.
• Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.

NOTE: REED plastic pipe reamers (Clean Ream Extreme® and Clean Ream Plus®) work with North America pipe diameters as they fit specific ID/OD for reaming work.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.

Money-saving reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused.

• Reams 3" Sch. 40 PVC, CPVC & ABS Fittings
• Plastic Pipe Fitting Reamers fit into standard ½” drills.
• Shaft Size: 3/8" Hex
• PPR reamers work great for vent lines, drain lines, and water lines.
• Its carbide cutting insert provides a cutting edge on each side.
• Rotate before replacement and receive three bonus cutting edges.
• Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.

NOTE: REED plastic pipe reamers (Clean Ream Extreme® and Clean Ream Plus®) work with North America pipe diameters as they fit specific ID/OD for reaming work.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.

Money-saving reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused.

• Reams 4" Sch. 40 PVC, CPVC & ABS Fittings
• Plastic Pipe Fitting Reamers fit into standard ½” drills.
• Shaft Size: 3/8" Hex
• PPR reamers work great for vent lines, drain lines, and water lines.
• Its carbide cutting insert provides a cutting edge on each side.
• Rotate before replacement and receive three bonus cutting edges.
• Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.

NOTE: REED plastic pipe reamers (Clean Ream Extreme® and Clean Ream Plus®) work with North America pipe diameters as they fit specific ID/OD for reaming work.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.

Money-saving reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused.

• Reams 3/4" Sch. 40 PVC, CPVC & ABS Fittings
• Plastic Pipe Fitting Reamers fit into standard ½” drills.
• Shaft Size: 1/4" Hex
• PPR reamers work great for vent lines, drain lines, and water lines.
• Its carbide cutting insert provides a cutting edge on each side.
• Rotate before replacement and receive three bonus cutting edges.
• Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.

NOTE: REED plastic pipe reamers (Clean Ream Extreme® and Clean Ream Plus®) work with North America pipe diameters as they fit specific ID/OD for reaming work.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.

Money-saving reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused.

• Kit with PPR150, PPR200, PPR300, PPR400 in a hard plastic case
• Reams Sch. 40 PVC, CPVC & ABS Fittings
• Plastic Pipe Fitting Reamers fit into standard ½” drills.
• PPR reamers work great for vent lines, drain lines, and water lines.
• Its carbide cutting insert provides a cutting edge on each side.
• Rotate before replacement and receive three bonus cutting edges.
• Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.

NOTE: REED plastic pipe reamers (Clean Ream Extreme® and Clean Ream Plus®) work with North America pipe diameters as they fit specific ID/OD for reaming work.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.

Money-saving reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused.

• Kit with PPR125, PPR150, PPR200, PPR300, PPR400 in a hard plastic case
• Reams Sch. 40 PVC, CPVC & ABS Fittings
• Plastic Pipe Fitting Reamers fit into standard ½” drills.
• PPR reamers work great for vent lines, drain lines, and water lines.
• Its carbide cutting insert provides a cutting edge on each side.
• Rotate before replacement and receive three bonus cutting edges.
• Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.

NOTE: REED plastic pipe reamers (Clean Ream Extreme® and Clean Ream Plus®) work with North America pipe diameters as they fit specific ID/OD for reaming work.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.

Money-saving reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused.

• Kit with PPR75, PPR100, PPR150, PPR200, PPR300, PPR400 in a hard plastic case
• Reams Sch. 40 PVC, CPVC & ABS Fittings
• Plastic Pipe Fitting Reamers fit into standard ½” drills.
• PPR reamers work great for vent lines, drain lines, and water lines.
• Its carbide cutting insert provides a cutting edge on each side.
• Rotate before replacement and receive three bonus cutting edges.
• Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.

NOTE: REED plastic pipe reamers (Clean Ream Extreme® and Clean Ream Plus®) work with North America pipe diameters as they fit specific ID/OD for reaming work.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.

Money-saving reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused.

• Kit with PPR75 (3/4"), PPR100 (1"), PPR125 (1 1/4"), PPR150 (1 1/2"), PPR200 (2"), PPR300 (3"), PPR400 (4") in a hard plastic case
• Reams Sch. 40 PVC, CPVC & ABS Fittings
• Plastic Pipe Fitting Reamers fit into standard ½” drills.
• PPR reamers work great for vent lines, drain lines, and water lines.
• Its carbide cutting insert provides a cutting edge on each side.
• Rotate before replacement and receive three bonus cutting edges.
• Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.

NOTE: REED plastic pipe reamers (Clean Ream Extreme® and Clean Ream Plus®) work with North America pipe diameters as they fit specific ID/OD for reaming work.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.