Time-and-material saving CSR2 Round It® Straightener/Rerounder handles 1 1/2” and 2” K annealed copper. Grips the end of a coil so uncoiling is easy; rerounds oval tubing or mild kinks anywhere along its length so cutter will track and fitting will seal properly. Provides safe grip when flaring, and guides copper into alignment for easier fit-ups.

• Take the trouble out of handling copper rolls by using Reed Round It(R) tools for straightening and rerounding.
• Provides the needed leverage to guide tube into position for fit-ups.
• Removes mild kinks, frequently preventing the need to cut out a section and to splice-in a short piece.
• Tools will quickly pay for themselves in material, labor and time savings.
• Copper Tube Size: 1 1/2" & 2"
• Length: 38"

With precision channels drilled from the tool’s end to its side, Pressure-Relieving Hammer Flares allow flaring even when water is in the service line. Use only on Type K soft copper water service tubing.

To absorb impact shock on striking, it is recommended to only strike the flaring tool with a soft-faced brass hammer like REED's HAM3.

• Suited for flaring Type K copper tubing with water in the service line.
• Make 45-degree flares with pressure relieving hammer flaring tools for copper tubing.
• Hardened and tempered to resist wear.
• Copper Tube Size: 1"
• Length: 7.5"

With precision channels drilled from the tool’s end to its side, Pressure-Relieving Hammer Flares allow flaring even when water is in the service line. Use only on Type K soft copper water service tubing.

To absorb impact shock on striking, it is recommended to only strike the flaring tool with a soft-faced brass hammer like REED's HAM3.

• Suited for flaring Type K copper tubing with water in the service line.
• Make 45-degree flares with pressure relieving hammer flaring tools for copper tubing.
• Hardened and tempered to resist wear.
• Copper Tube Size: 3/4"
• Length: 7.5"

1” RCR1 tools are especially useful when tubing is wet for a solid grip when straightening and fitting up.  The long-handled RCR rerounders are beneficial when extra leverage is needed.

• Take the trouble out of handling copper rolls by using Reed Round It(R) tools for straightening and rerounding.
• Provides the needed leverage to guide tube into position for fit-ups.
• Removes mild kinks, frequently preventing the need to cut out a section and to splice-in a short piece.
• Tools will quickly pay for themselves in material, labor and time savings.
• Copper Tube Size: 1"
• Length: 18"

3/4” RCR34 tools are especially useful when tubing is wet for a solid grip when straightening and fitting up.  The long-handled RCR rerounders are beneficial when extra leverage is needed.

• Take the trouble out of handling copper rolls by using Reed Round It(R) tools for straightening and rerounding.
• Provides the needed leverage to guide tube into position for fit-ups.
• Removes mild kinks, frequently preventing the need to cut out a section and to splice-in a short piece.
• Tools will quickly pay for themselves in material, labor and time savings.
• Copper Tube Size: 3/4"
• Length: 18"

RCR341 tools are especially useful when tubing is wet for a solid grip when straightening and fitting up.  The long-handled RCR rerounders are beneficial when extra leverage is needed.

• Take the trouble out of handling copper rolls by using Reed Round It(R) tools for straightening and rerounding.
• Provides the needed leverage to guide tube into position for fit-ups.
• Removes mild kinks, frequently preventing the need to cut out a section and to splice-in a short piece.
• Tools will quickly pay for themselves in material, labor and time savings.
• Copper Tube Size: 3/4" & 1"
• Length: 18"

Copper Shut-Off Tools are designed to shut-off and reshape Type K service line copper tube. The shut-off tool swings open to go handily around the pipe. Fine threads on the feed screw provide smooth, easy tightening using the ratchet drive handle. The support handle can be positioned in two different spots, depending on where there is clearance. The bottom open area of the shut-off tool is used to reround the copper tube after the repair to allow 70-75% return of flow. Generally there is no noticeable flow difference to the customer after the tube is rerounded. All parts are corrosion protected for long service life. Grease fittings for lubrication maintenance yield long tool life and easy operation.

• CSO1R shuts-off and reshapes 3/4” – 1” Type K copper tubing.
• Redesigned with detachable, ratchet drive handle, Reed’s CSO1R stores compactly in its included, heavy-duty case.
• They are designed only for use on soft copper tube service lines.
• Support handle can be positioned in two different, perpendicular angles for job demands.
• Steel castings provide superior tool strength.

Copper Shut-Off Tools are designed to shut-off and reshape Type K service line copper tube. The shut-off tool swings open to go handily around the pipe. Fine threads on the feed screw provide smooth, easy tightening using the ratchet drive handle. The support handle can be positioned in two different spots, depending on where there is clearance. The bottom open area of the shut-off tool is used to reround the copper tube after the repair to allow 70-75% return of flow. Generally there is no noticeable flow difference to the customer after the tube is rerounded. All parts are corrosion protected for long service life. Grease fittings for lubrication maintenance yield long tool life and easy operation.

• Shuts-off and reshapes 1 1/4” – 2” Type K copper tubing.
• Redesigned with detachable, ratchet drive handle, shut-off tools store compactly in a heavy-duty case.
• Intended only for use on soft copper tube service lines.
• Support handle can be positioned in two different, perpendicular angles for job demands.
• Threaded feed screw is zinc-plated for corrosion resistance.
• Hard anodized, aluminum castings of CSO2R models reduce tool weight and give long service life.

Soft-faced brass hammer is designed for the safe use of flare tools as the brass head absorbs some of the striking shock.  It pairs well with flaring tools used on Type K soft copper tubing.

• Shock-absorbing brass hammer.

High-quality, hardened steel, hammer flaring tools for copper tubing are toolbox basics. Designed to make uniform, 45 degree flares on Type K soft copper water service tubing, REED’s flaring tools feature large pilots and knurled finger grip areas for added safety. REED offers hammer flaring tools in a variety of copper tubing sizes.

 To absorb impact shock on striking, it is recommended to only strike the flaring tool with a soft-faced brass hammer like REED's HAM3.

• Copper Tube Size: 1"
• Designed with larger pilots and finger grip areas for safety.
• Quality flaring tools for use on Type K soft copper tubing.

High-quality, hardened steel, hammer flaring tools for copper tubing are toolbox basics. Designed to make uniform, 45 degree flares on Type K soft copper water service tubing, REED’s flaring tools feature large pilots and knurled finger grip areas for added safety. REED offers hammer flaring tools in a variety of copper tubing sizes.

 To absorb impact shock on striking, it is recommended to only strike the flaring tool with a soft-faced brass hammer like REED's HAM3.

• Copper Tube Size: 1 1/2"
• Designed with larger pilots and finger grip areas for safety.
• Quality flaring tools for use on Type K soft copper tubing.

High-quality, hardened steel, hammer flaring tools for copper tubing are toolbox basics. Designed to make uniform, 45 degree flares on Type K soft copper water service tubing, REED’s flaring tools feature large pilots and knurled finger grip areas for added safety. REED offers hammer flaring tools in a variety of copper tubing sizes.

 To absorb impact shock on striking, it is recommended to only strike the flaring tool with a soft-faced brass hammer like REED's HAM3.

• Copper Tube Size: 2"
• Designed with larger pilots and finger grip areas for safety.
• Quality flaring tools for use on Type K soft copper tubing.