PLAS In-Line Rotary™ Cutters are excellent for cutting PVC pipe in trench or above ground. 

PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.

• Pipe Diameter: 6" - 12"
• Application: PVC Sch. 40, PVC C900 & C905
• Sections Used: A, B, C

For cutting PVC pipe, the long-lasting carbide-tipped blades penetrate up to a 2” wall thickness.

• Safe to use as it creates no dust and chips fall where they are cut. There is no danger of chips being blown well into pipe.
• Only 6"-8" clearance needed to turn PLAS tool around pipe.
• Cuts out-of-round pipe because of spring loaded nuts.
• Simultaneously cut and bevel PVC using cut-off blade and bevel blade.
• This is an inexpensive tool for contractors to use to make a cut for a tie-in or pipe break and then get the line back in use. Reduce overall labor costs.

PLAS In-Line Rotary™ Cutters are excellent for cutting PE / HDPE pipe in trench or above ground. 

PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.

• Pipe Diameter: 6" - 12"
• Application: PE, HDPE
• Sections Used: A, B, C

PLAS Cutter Specific Limitations for PE:
up to 14" pipe (355 mm) - 2" (51 mm) wall thickness
up to 18" pipe (500 mm) - 1 1/2" (38 mm) wall thickness
up to 28" pipe (800 mm) - 1" (25.4 mm) wall thickness

• Safe to use as it creates no dust and chips fall where they are cut. There is no danger of chips being blown well into pipe.
• Only 6"-8" clearance needed to turn PLAS tool around pipe.
• Cuts out-of-round pipe because of spring loaded nuts.
• Simultaneously cut and bevel PE using cut-off blade and bevel blade.
• This is an inexpensive tool for contractors to use to make a cut for a tie-in or pipe break and then get the line back in use. Reduce overall labor costs.

PLAS In-Line Rotary™ Cutters are excellent for cutting PVC pipe in trench or above ground. 

PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.

• Pipe Diameter: 14" - 18"
• Application: PVC Sch. 40, PVC C900 & C905
• Sections Used: B, C (2), D

For cutting PVC pipe, the long-lasting carbide-tipped blades penetrate up to a 2” wall thickness.

• Safe to use as it creates no dust and chips fall where they are cut. There is no danger of chips being blown well into pipe.
• Only 6"-8" clearance needed to turn PLAS tool around pipe.
• Cuts out-of-round pipe because of spring loaded nuts.
• Simultaneously cut and bevel PVC using cut-off blade and bevel blade.
• This is an inexpensive tool for contractors to use to make a cut for a tie-in or pipe break and then get the line back in use. Reduce overall labor costs.

PLAS In-Line Rotary™ Cutters are excellent for cutting PE / HDPE pipe in trench or above ground. 

PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.

• Pipe Diameter: 14" - 18"
• Application: PE, HDPE
• Sections Used: B, C (2), D

PLAS Cutter Specific Limitations for PE:
up to 14" pipe (355 mm) - 2" (51 mm) wall thickness
up to 18" pipe (500 mm) - 1 1/2" (38 mm) wall thickness
up to 28" pipe (800 mm) - 1" (25.4 mm) wall thickness

• Safe to use as it creates no dust and chips fall where they are cut. There is no danger of chips being blown well into pipe.
• Only 6"-8" clearance needed to turn PLAS tool around pipe.
• Cuts out-of-round pipe because of spring loaded nuts.
• Simultaneously cut and bevel PE using cut-off blade and bevel blade.
• This is an inexpensive tool for contractors to use to make a cut for a tie-in or pipe break and then get the line back in use. Reduce overall labor costs.

PLAS In-Line Rotary™ Cutters are excellent for cutting PVC pipe in trench or above ground. 

PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.

• Pipe Diameter: 14" - 24"
• Application: PVC Sch. 40, PVC C900 & C905
• Sections Used: B, C (3), D

For cutting PVC pipe, the long-lasting carbide-tipped blades penetrate up to a 2” wall thickness.

• Safe to use as it creates no dust and chips fall where they are cut. There is no danger of chips being blown well into pipe.
• Only 6"-8" clearance needed to turn PLAS tool around pipe.
• Cuts out-of-round pipe because of spring loaded nuts.
• Simultaneously cut and bevel PVC using cut-off blade and bevel blade.
• This is an inexpensive tool for contractors to use to make a cut for a tie-in or pipe break and then get the line back in use. Reduce overall labor costs.

PLAS In-Line Rotary™ Cutters are excellent for cutting PE / HDPE pipe in trench or above ground. 

PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.

• Pipe Diameter: 14" - 24"
• Application: PE, HDPE
• Sections Used: B, C (3), D

PLAS Cutter Specific Limitations for PE:
up to 14" pipe (355 mm) - 2" (51 mm) wall thickness
up to 18" pipe (500 mm) - 1 1/2" (38 mm) wall thickness
up to 28" pipe (800 mm) - 1" (25.4 mm) wall thickness

• Safe to use as it creates no dust and chips fall where they are cut. There is no danger of chips being blown well into pipe.
• Only 6"-8" clearance needed to turn PLAS tool around pipe.
• Cuts out-of-round pipe because of spring loaded nuts.
• Simultaneously cut and bevel PE using cut-off blade and bevel blade.
• This is an inexpensive tool for contractors to use to make a cut for a tie-in or pipe break and then get the line back in use. Reduce overall labor costs.

PLAS In-Line Rotary™ Cutters are excellent for cutting PVC pipe in trench or above ground. 

PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.

• Pipe Diameter: 14" - 28"
• Application: PVC Sch. 40, PVC C900 & C905
• Sections Used: B, C (4), D

For cutting PVC pipe, the long-lasting carbide-tipped blades penetrate up to a 2” wall thickness.

• Safe to use as it creates no dust and chips fall where they are cut. There is no danger of chips being blown well into pipe.
• Only 6"-8" clearance needed to turn PLAS tool around pipe.
• Cuts out-of-round pipe because of spring loaded nuts.
• Simultaneously cut and bevel PVC using cut-off blade and bevel blade.
• This is an inexpensive tool for contractors to use to make a cut for a tie-in or pipe break and then get the line back in use. Reduce overall labor costs.

PLAS In-Line Rotary™ Cutters are excellent for cutting PE / HDPE pipe in trench or above ground. 

PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.

• Pipe Diameter: 14" - 28"
• Application: PE, HDPE
• Sections Used: B, C (4), D

PLAS Cutter Specific Limitations for PE:
up to 14" pipe (355 mm) - 2" (51 mm) wall thickness
up to 18" pipe (500 mm) - 1 1/2" (38 mm) wall thickness
up to 28" pipe (800 mm) - 1" (25.4 mm) wall thickness

• Safe to use as it creates no dust and chips fall where they are cut. There is no danger of chips being blown well into pipe.
• Only 6"-8" clearance needed to turn PLAS tool around pipe.
• Cuts out-of-round pipe because of spring loaded nuts.
• Simultaneously cut and bevel PE using cut-off blade and bevel blade.
• This is an inexpensive tool for contractors to use to make a cut for a tie-in or pipe break and then get the line back in use. Reduce overall labor costs.

Bevel Blade for PVC and PE Pipe for PLAS In-Line Rotary Cutter

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.   

PLAS Bevel Blade Assembly for PLAS In-Line Rotary Cutter

• Assembly includes wheel pin, threaded rod, bevel blade and bevel blade holder.
• Convenient replacement part for Bevel Blade section for all PLAS cutters.
• Bevel blade is used on PVC pipe.

Cut-Off Blade for PE for PLAS In-Line Rotary Cutter

• Cut-off blade for PLAS models used on PE pipe.
• Made from tool steel for long blade life.
• Blade tip designed to drive out chips.

Cut-Off Blade for PVC for PLAS In-Line Rotary Cutter

• Cut-off blade for PLAS models used on PVC pipe.
• Carbide-tipped blade withstands abrasive PVC.
• To avoid breaking tip of blade, turn tool only in direction indicated on PLAS cutter.