Anti-Seep Collars

PURCHASE FROM OUR STORE

2' x 2' Anti-Seep Collar (Gum Rubber)

2' x 2' Anti-Seep Collar (Gum Rubber)

  • SKU: AASC22
  • Brand:

  • Product Description:

    Keep your pipe from being washed out.

    • Works with any smooth wall pipe or corrugated plastic tubing
    • 3/16" gum rubber
    • Wood Frame
    Install in two easy steps:
    • Cut a round hole* in the rubber 33% smaller than your pipe size
    • Insert the pipe through the round hole in the rubber
    • *Cutting an X or slit will cause gum rubber to rip.  You must cut a round hole.

2' x 2' Anti-Seep Collar for 2

2' x 2' Anti-Seep Collar for 2" IPS PVC Pipe

  • SKU: ANTISEEP2X2X02
  • Brand:

  • Product Description:

    Anti-Seep collars are user friendly and can be installed during new pipe installation or around an existing pipe.

    • Help prevent your pipe from being washed out.
    • Constructed from durable 1/4" high density polyethylene plastic (HDPE)
    • Made with PVC Compression Coupling in the center for PVC IPS Pipe
    • Available in 4' x 4', 5' x 5' and 6' x 6' sizes.  
    • Shipping is included in the 48 contiguous states

    Installation Instructions:

    1. The pipe is placed through the compression coupler and tightened on both sides with a compression nut
    2. Backfill and hand tamp.

3' x 3' Anti-Seep Collar (Gum Rubber)

3' x 3' Anti-Seep Collar (Gum Rubber)

  • SKU: AASC33
  • Brand:

  • Product Description:

    Keep your pipe from being washed out.

    • Works with any smooth wall pipe or corrugated plastic tubing
    • 3/16" gum rubber
    • Wood Frame
    Install in two easy steps:
    • Cut a round hole* in the rubber 33% smaller than your pipe size
    • Insert the pipe through the round hole in the rubber
    • *Cutting an X or slit will cause gum rubber to rip.  You must cut a round hole.

     


4' x 4' Anti-Seep Collar (Gum Rubber)

4' x 4' Anti-Seep Collar (Gum Rubber)

  • SKU: AASC44
  • Brand:

  • Product Description:

    Keep your pipe from being washed out.

    • Works with any smooth wall pipe or corrugated plastic tubing
    • 3/16" gum rubber
    • Wood Frame
    Install in two easy steps:
    • Cut a round hole* in the rubber 33% smaller than your pipe size
    • Insert the pipe through the round hole in the rubber
    • *Cutting an X or slit will cause gum rubber to rip.  You must cut a round hole.

4' x 4' Anti-Seep Collar for 10

4' x 4' Anti-Seep Collar for 10" Pipe

  • SKU: ANTISEEP4X4X10
  • Brand:

  • Product Description:

    Anti-Seep collars are user friendly and can be installed during new pipe installation or around an existing pipe.

    • Help prevent your pipe from being washed out.
    • Constructed from durable 1/4" high density polyethylene plastic (HDPE)
    • Pre-cut and drilled with stainless steel bolts and bands.
    • Tools needed to assemble: Two small wrenches and a screwdriver.
    • Available for Corrugated Plastic, PVC and Steel Pipe
    • Available in 4' x 4', 5' x 5' and 6' x 6' sizes.  
    • Pipe Type and OD - Outside Diameter required
    • Shipping is included in the 48 contiguous states

    NOTE: Actual size not shown.  Picture is a 6' x 6' x 10".  The flat surface of the Anti-Seep is reduced as the diameter of the pipe increases.

    For example:

    A 4' x 4' x 12" - approximately 17" +/- of flat surface on each side. 

    A 4' x 4' x 18" - approximately 14" +/- of flat surface on each side.   

    Installation Instructions:

    1. Apply tar or mastic to bottom half of collar and lay pipe on collar.
    2. Apply mastic to top half of collar and set in place lining up red stripes.
    3. Bolt two halves together.
    4. Install metal bands on split halves of collar.
    5. Tighten bolts and bands. 
    6. Apply mastic as needed for a good seal.
    7. Backfill and hand tamp.

4' x 4' Anti-Seep Collar for 12

4' x 4' Anti-Seep Collar for 12" Pipe

  • SKU: ANTISEEP4X4X12
  • Brand:

  • Product Description:

    Anti-Seep collars are user friendly and can be installed during new pipe installation or around an existing pipe.

    • Help prevent your pipe from being washed out.
    • Constructed from durable 1/4" high density polyethylene plastic (HDPE)
    • Pre-cut and drilled with stainless steel bolts and bands.
    • Tools needed to assemble: Two small wrenches and a screwdriver.
    • Available for Corrugated Plastic, PVC and Steel Pipe
    • Available in 4' x 4', 5' x 5' and 6' x 6' sizes.  
    • Pipe Type and OD - Outside Diameter required
    • Shipping is included in the 48 contiguous states

    NOTE: Actual size not shown.  Picture is a 6' x 6' x 10".  The flat surface of the Anti-Seep is reduced as the diameter of the pipe increases.

    For example:

    A 4' x 4' x 12" - approximately 17" +/- of flat surface on each side. 

    A 4' x 4' x 18" - approximately 14" +/- of flat surface on each side.   

    Installation Instructions:

    1. Apply tar or mastic to bottom half of collar and lay pipe on collar.
    2. Apply mastic to top half of collar and set in place lining up red stripes.
    3. Bolt two halves together.
    4. Install metal bands on split halves of collar.
    5. Tighten bolts and bands. 
    6. Apply mastic as needed for a good seal.
    7. Backfill and hand tamp.

     


4' x 4' Anti-Seep Collar for 15

4' x 4' Anti-Seep Collar for 15" Pipe

  • SKU: ANTISEEP4X4X15
  • Brand:

  • Product Description:

    Anti-Seep collars are user friendly and can be installed during new pipe installation or around an existing pipe.

    • Help prevent your pipe from being washed out.
    • Constructed from durable 1/4" high density polyethylene plastic (HDPE)
    • Pre-cut and drilled with stainless steel bolts and bands.
    • Tools needed to assemble: Two small wrenches and a screwdriver.
    • Available for Corrugated Plastic, PVC and Steel Pipe
    • Available in 4' x 4', 5' x 5' and 6' x 6' sizes.  
    • Pipe Type and OD - Outside Diameter required
    • Shipping is included in the 48 contiguous states

    NOTE: Actual size not shown.  Picture is a 6' x 6' x 10".  The flat surface of the Anti-Seep is reduced as the diameter of the pipe increases.

    For example:

    A 4' x 4' x 12" - approximately 17" +/- of flat surface on each side. 

    A 4' x 4' x 18" - approximately 14" +/- of flat surface on each side.   

    Installation Instructions:

    1. Apply tar or mastic to bottom half of collar and lay pipe on collar.
    2. Apply mastic to top half of collar and set in place lining up red stripes.
    3. Bolt two halves together.
    4. Install metal bands on split halves of collar.
    5. Tighten bolts and bands. 
    6. Apply mastic as needed for a good seal.
    7. Backfill and hand tamp.

4' x 4' Anti-Seep Collar for 18

4' x 4' Anti-Seep Collar for 18" Pipe

  • SKU: ANTISEEP4X4X18
  • Brand:

  • Product Description:

    Anti-Seep collars are user friendly and can be installed during new pipe installation or around an existing pipe.

    • Help prevent your pipe from being washed out.
    • Constructed from durable 1/4" high density polyethylene plastic (HDPE)
    • Pre-cut and drilled with stainless steel bolts and bands.
    • Tools needed to assemble: Two small wrenches and a screwdriver.
    • Available for Corrugated Plastic, PVC and Steel Pipe
    • Available in 4' x 4', 5' x 5' and 6' x 6' sizes.  
    • Pipe Type and OD - Outside Diameter required
    • Shipping is included in the 48 contiguous states

    NOTE: Actual size not shown.  Picture is a 6' x 6' x 10".  The flat surface of the Anti-Seep is reduced as the diameter of the pipe increases.

    For example:

    A 4' x 4' x 12" - approximately 17" +/- of flat surface on each side. 

    A 4' x 4' x 18" - approximately 14" +/- of flat surface on each side.   

    Installation Instructions:

    1. Apply tar or mastic to bottom half of collar and lay pipe on collar.
    2. Apply mastic to top half of collar and set in place lining up red stripes.
    3. Bolt two halves together.
    4. Install metal bands on split halves of collar.
    5. Tighten bolts and bands. 
    6. Apply mastic as needed for a good seal.
    7. Backfill and hand tamp.

4' x 4' Anti-Seep Collar for 2

4' x 4' Anti-Seep Collar for 2" IPS PVC Pipe

  • SKU: ANTISEEP4X4X02
  • Brand:

  • Product Description:

    Anti-Seep collars are user friendly and can be installed during new pipe installation or around an existing pipe.

    • Help prevent your pipe from being washed out.
    • Constructed from durable 1/4" high density polyethylene plastic (HDPE)
    • Made with PVC Compression Coupling in the center for PVC IPS Pipe
    • Available in 4' x 4', 5' x 5' and 6' x 6' sizes.  
    • Shipping is included in the 48 contiguous states

    Installation Instructions:

    1. The pipe is placed through the compression coupler and tightened on both sides with a compression nut
    2. Backfill and hand tamp.

4' x 4' Anti-Seep Collar for 24

4' x 4' Anti-Seep Collar for 24" Pipe

  • SKU: ANTISEEP4X4X24
  • Brand:

  • Product Description:

    Anti-Seep collars are user friendly and can be installed during new pipe installation or around an existing pipe.

    • Help prevent your pipe from being washed out.
    • Constructed from durable 1/4" high density polyethylene plastic (HDPE)
    • Pre-cut and drilled with stainless steel bolts and bands.
    • Tools needed to assemble: Two small wrenches and a screwdriver.
    • Available for Corrugated Plastic, PVC and Steel Pipe
    • Available in 4' x 4', 5' x 5' and 6' x 6' sizes.  
    • Pipe Type and OD - Outside Diameter required
    • Shipping is included in the 48 contiguous states

    Installation Instructions:

    1. Apply tar or mastic to bottom half of collar and lay pipe on collar.
    2. Apply mastic to top half of collar and set in place lining up red stripes.
    3. Bolt two halves together.
    4. Install metal bands on split halves of collar.
    5. Tighten bolts and bands. 
    6. Apply mastic as needed for a good seal.
    7. Backfill and hand tamp.

4' x 4' Anti-Seep Collar for 4

4' x 4' Anti-Seep Collar for 4" Pipe

  • SKU: ANTISEEP4X4X04
  • Brand:

  • Product Description:

    Anti-Seep collars are user friendly and can be installed during new pipe installation or around an existing pipe.

    • Help prevent your pipe from being washed out.
    • Constructed from durable 1/4" high density polyethylene plastic (HDPE)
    • Pre-cut and drilled with stainless steel bolts and bands.
    • Tools needed to assemble: Two small wrenches and a screwdriver.
    • Available for Corrugated Plastic, PVC and Steel Pipe
    • Available in 4' x 4', 5' x 5' and 6' x 6' sizes.  
    • Pipe Type and OD - Outside Diameter required
    • Shipping is included in the 48 contiguous states

    NOTE: Actual size not shown.  Picture is a 6' x 6' x 10".  The flat surface of the Anti-Seep is reduced as the diameter of the pipe increases.

    For example:

    A 4' x 4' x 12" - approximately 17" +/- of flat surface on each side. 

    A 4' x 4' x 18" - approximately 14" +/- of flat surface on each side.   

    Installation Instructions:

    1. Apply tar or mastic to bottom half of collar and lay pipe on collar.
    2. Apply mastic to top half of collar and set in place lining up red stripes.
    3. Bolt two halves together.
    4. Install metal bands on split halves of collar.
    5. Tighten bolts and bands. 
    6. Apply mastic as needed for a good seal.
    7. Backfill and hand tamp.

4' x 4' Anti-Seep Collar for 5

4' x 4' Anti-Seep Collar for 5" Pipe

  • SKU: ANTISEEP4X4X05
  • Brand:

  • Product Description:

    Anti-Seep collars are user friendly and can be installed during new pipe installation or around an existing pipe.

    • Help prevent your pipe from being washed out.
    • Constructed from durable 1/4" high density polyethylene plastic (HDPE)
    • Pre-cut and drilled with stainless steel bolts and bands.
    • Tools needed to assemble: Two small wrenches and a screwdriver.
    • Available for Corrugated Plastic, PVC and Steel Pipe
    • Available in 4' x 4', 5' x 5' and 6' x 6' sizes.  
    • Pipe Type and OD - Outside Diameter required
    • Shipping is included in the 48 contiguous states

    NOTE: Actual size not shown.  Picture is a 6' x 6' x 10".  The flat surface of the Anti-Seep is reduced as the diameter of the pipe increases.

    For example:

    A 4' x 4' x 12" - approximately 17" +/- of flat surface on each side. 

    A 4' x 4' x 18" - approximately 14" +/- of flat surface on each side.   

    Installation Instructions:

    1. Apply tar or mastic to bottom half of collar and lay pipe on collar.
    2. Apply mastic to top half of collar and set in place lining up red stripes.
    3. Bolt two halves together.
    4. Install metal bands on split halves of collar.
    5. Tighten bolts and bands. 
    6. Apply mastic as needed for a good seal.
    7. Backfill and hand tamp.