Sioux Chief SawHorse Saw

 High-quality, hardened-steel blade remains sharp through thousands of cuts

• Perfect for plastic pipe, wood and many other materials
• 12" model has 13 teeth/inch for fine cutting.
• Teeth are on the nose for notching in tight areas and starting cuts in the middle of floor or wall

Applications:

Concrete Pipe, Cured Concrete, Brick, Block

Usage:

Handheld Saws, Chop Saws, and Walk-Behind Saws (Low Horsepower - 20HP or less)

Other Available Sizes:

12", 14', 18' & 20"

Applications:

Asphalt, Asphalt Over Concrete, Green Concrete

Usage:

Handheld Saws, Chop Saws, and Walk-Behind Saws (Low horsepower - 20HP or less)

Other Available Sizes:

12", 16" 18" & 20"

Applications:

Ductile Iron Pipe, Plastic Pipe, Cast Iron, Rebar, Angle Iron, Threaded Rod, Wood, Rescue Applications

Usage:

Handheld Saws & Chop Saws

Other Available Sizes:

4", 4.5", 7", 8",10", 12", 16" 18" & 20"

Applications:

Ductile Iron Pipe, Plastic Pipe, Some Concrete*, Clay Pipe, *Reduced life expectancy in concrete.

Usage:

Handheld Saws & Chop Saws

Other Available Sizes:

12", 16" 18" & 20"

Applications:

Asphalt, Cured Concrete, Concrete Pipe, Brick, Block, Roof Tile

Usage:

Handheld Saws, Chop Saws, and Walk Behind Saws (low horsepower - 20HP or less)

Other Available Sizes:

12", 16" 18" & 20"

• CUTS PLASTIC PIPE EASILY
  Teeth cut on the pull stroke and not on the push stroke for safety
  
• COMFORTABLE GRIP
  Rubberized handles allow for confident handling even in cold, hot, wet or dirty environments
• FLUSH CUTTING OPTION
  Easily mount the blade on the bottom of handle for flush cutting applications

Specifications:

• TPI: 10 Teeth per inch
• Length: 12"

REPLACEMENT BLADE ONLY

• TPI: 10 Teeth per inch
• Length: 12"

• CUTS PLASTIC PIPE EASILY
  Teeth cut on the pull stroke and not on the push stroke for safety
  
• COMFORTABLE GRIP
  Rubberized handles allow for confident handling even in cold, hot, wet or dirty environments
• FLUSH CUTTING OPTION
  Easily mount the blade on the bottom of handle for flush cutting applications

Specifications:

• TPI: 10 Teeth per inch
• Length: 18"

REPLACEMENT BLADE ONLY

• TPI: 10 Teeth per inch
• Length: 18"

Reed Internal Pipe Cutters cut pipe from the inside (i.e. drain pipes or sprinkler drops, etc).

• IC1A comes with an abrasive blade for areas where the blade may come in contact with concrete or other hard surfaces which would destroy a saw-tooth blade.
• Conveniently cut from the inside using a standard 3/8” drill. (Drill not included.)
• Used to cut off pipes below floor level or in the ceiling in new construction, around pools, and for replacement of closet flanges.
• During use, flats on the larger cutters keep the cutter from slipping in the jaws of the drill while a lock washer on the smaller cutters keeps the blades from slipping.
• Shaft: 4"
• Blade Type: Abrasive
• Blade Diameter: 1.53"
• Blade Cutting Depth 1/2"