2-in-1 tool which deburrs outer diameter on one end and inner diameter on the other end.  No need to buy two separate tools.

• Use for PVC, CPVC, ABS, PE and PP pipe.
• Pipe Capacity nom. 1/2", 3/4", 1" I.D./O.D
• Pipe/Tubing: IPS
• DEB1 offers knurled grip for slip-resistance and durable aluminum body for longevity.
• All DEB1 models have internal pipe guides.
• Knurled grip for slip-resistance.
• Sharpenable and/or replaceable blade.
• The internal blade is reversible with two cutting edges.

The DEB2 cone shape deburrs the inner and outer edges of PVC, CPVC, ABS, PE and PP pipe through 2” diameter.  

• Made from steel, the cone design allows it to be used on even the smallest pipe, including 1/8” diameter.  
• The part that rests in the operator’s hand features a thick plastic edge covering for hand comfort.
• For deburring inside and outside of PE, use DEB2.
• Suitable for PVC, CPVC, ABS, PE and PP.

One easy revolution of Reed exclusive DEB4 deburrs and produces a 15° external chamfer in seconds.

• Suitable for PVC, CPVC, ABS and PP.
• Provides external chamfer/bevel on plastic pipe.
• Deburr and chamfer in the same rotation using DEB4.
• DEB4 deburrs the outside of the pipe only to allow easy assembly into fittings.
• It fits comfortably in one’s hand for a secure grip.
• As an alternative to hand turning, there’s a ½” square drive pocket on the backside for use with a ratchet wrench.
• DEB4 creates a smooth, chamfered pipe end so solvent can be spread evenly for pipe joining.
• Aluminum die-cast DEB4 features a hardened steel blade that is reversible, sharpenable and replaceable.
• Fits six nominal pipe sizes of PVC, CPVC, ABS and PP up through 4” diameter. (1-1/4", 1-1/2", 2", 2-1/2", 3", 4" nom.)

Reed Internal Pipe Cutters cut pipe from the inside (i.e. drain pipes or sprinkler drops, etc).

• IC1A comes with an abrasive blade for areas where the blade may come in contact with concrete or other hard surfaces which would destroy a saw-tooth blade.
• Conveniently cut from the inside using a standard 3/8” drill. (Drill not included.)
• Used to cut off pipes below floor level or in the ceiling in new construction, around pools, and for replacement of closet flanges.
• During use, flats on the larger cutters keep the cutter from slipping in the jaws of the drill while a lock washer on the smaller cutters keeps the blades from slipping.
• Shaft: 4"
• Blade Type: Abrasive
• Blade Diameter: 1.53"
• Blade Cutting Depth 1/2"

Reed Internal Pipe Cutters cut pipe from the inside (i.e. drain pipes or sprinkler drops, etc).

• Heat-treated steel, saw-toothed blade make for fast cutting.
• During use, flats on the larger cutters keep the cutter from slipping in the jaws of the drill while a lock washer on the smaller cutters keeps the blades from slipping.
• All saw-toothed internal pipe cutter models cut plastic pipe aggressively and can cut wood for sink lugs.
• Conveniently cut from the inside using a standard 3/8” drill. (Drill not included.)
• Shaft: 4"
• Blade Type: Saw Tooth
• Blade Diameter: 1.26"
• Blade Cutting Depth .38"

Reed Internal Pipe Cutters cut pipe from the inside (i.e. drain pipes or sprinkler drops, etc).

• Heat-treated steel, saw-toothed blade make for fast cutting.
• During use, flats on the larger cutters keep the cutter from slipping in the jaws of the drill while a lock washer on the smaller cutters keeps the blades from slipping.
• All saw-toothed internal pipe cutter models cut plastic pipe aggressively and can cut wood for sink lugs.
• Conveniently cut from the inside using a standard 3/8” drill. (Drill not included.)
• Shaft: 7"
• Blade Type: Saw Tooth
• Blade Diameter: 1.26"
• Blade Cutting Depth .38"
• IC1SL features an adjustable guide that doubles as a depth gauge.

Reed Internal Pipe Cutters cut pipe from the inside (i.e. drain pipes or sprinkler drops, etc).

• Heat-treated steel, saw-toothed blade make for fast cutting.
• During use, flats on the larger cutters keep the cutter from slipping in the jaws of the drill while a lock washer on the smaller cutters keeps the blades from slipping.
• All saw-toothed internal pipe cutter models cut plastic pipe aggressively and can cut wood for sink lugs.
• Conveniently cut from the inside using a standard 3/8” drill. (Drill not included.)
• Shaft: 6"
• Blade Type: Saw Tooth
• Blade Diameter: .75"
• Blade Cutting Depth .13"
• IC3/4SL features an adjustable guide that doubles as a depth gauge.

This tool is used to prepare PVC, CPVC, ABS and PE type IPS pipe for the gluing of joints.   

The Chamfer Tool attaches to an electric or cordless drill (not included).   

• 2" chamfer tool cuts a 1/8” X 15° chamfer on outside diameter and a small chamfer on the inside diameter.
• The inside blade adjusts to chamfer Schedule 40 or Schedule 80 pipe.
• Features strong, aluminum body and 3/8 inch hex, steel shaft.
• Uses drill power which eliminates user fatigue when making multiple cuts/chamfers.
• Deburrs inside and outside simultaneously, in just seconds.
• Produces smooth, consistent chamfer on plastic pipe, eliminating leaky glue joints that can be caused by improper chamfer.
• Great for vent pipe such as System 636® pipe.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

This tool is used to prepare PVC, CPVC, ABS and PE type IPS pipe for the gluing of joints.   

The Chamfer Tool attaches to an electric or cordless drill (not included).   

• 3" chamfer tool cuts a 5/32” X 15° chamfer on outside diameter and a small chamfer on the inside diameter.
• The inside blade adjusts to chamfer Schedule 40 or Schedule 80 pipe.
• Features strong, aluminum body and 3/8 inch hex, steel shaft.
• Uses drill power which eliminates user fatigue when making multiple cuts/chamfers.
• Deburrs inside and outside simultaneously, in just seconds.
• Produces smooth, consistent chamfer on plastic pipe, eliminating leaky glue joints that can be caused by improper chamfer.
• Great for vent pipe such as System 636® pipe.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

This tool is used to prepare PVC, CPVC, ABS and PE type IPS pipe for the gluing of joints.   

The Chamfer Tool attaches to an electric or cordless drill (not included).   

• 4" chamfer tool cuts a 5/32” X 15° chamfer on outside diameter and a small chamfer on the inside diameter.
• The inside blade adjusts to chamfer Schedule 40 or Schedule 80 pipe.
• Features strong, aluminum body and 3/8 inch hex, steel shaft.
• Uses drill power which eliminates user fatigue when making multiple cuts/chamfers.
• Deburrs inside and outside simultaneously, in just seconds.
• Produces smooth, consistent chamfer on plastic pipe, eliminating leaky glue joints that can be caused by improper chamfer.
• Great for vent pipe such as System 636® pipe.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

This tool is used to prepare PVC, CPVC, ABS and PE type IPS pipe for the gluing of joints.   

The Chamfer Tool attaches to an electric or cordless drill (not included).   

• Kit includes 2", 3" & 4" chamfer tools with case for solvent connections. 
• Chamfer tool cuts a 1/8” X 15° chamfer on outside diameter of 2” pipe and 5/32” X 15° on 3” and 4” diameter pipe and a small chamfer on the inside diameter.
• The inside blade adjusts to chamfer Schedule 40 or Schedule 80 pipe.
• Features strong, aluminum body and 3/8 inch hex, steel shaft.
• Uses drill power which eliminates user fatigue when making multiple cuts/chamfers.
• Deburrs inside and outside simultaneously, in just seconds.
• Produces smooth, consistent chamfer on plastic pipe, eliminating leaky glue joints that can be caused by improper chamfer.
• Great for vent pipe such as System 636® pipe.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

The True Peel® PE Prep Tool removes dirt and oxidation from the outside diameter of the pipe in preparation for electrofusion.

Fits 1 1/4” CTS SDR11 .121 Wall Mandrel #98669

• Removes .009” - .012” peel thickness.
• Spring actuated blade gives a complete peel, even on out-of-round pipe.
• An observation window allows operator to see when the peel is complete by viewing the pipe end in the middle of the window. 
• External cutting blade allows for clear observation of the peel removal.
• Hardened tool steel cutting blade with two cutting edges for twice the life.
• Close fitting mandrel to round pipe that may be oval.
• Includes a protective carrying case.
• These tools can be used on the ends of pipe or on tapping tee outlets. 
• The PE pipe peeler blade may be rotated 180 degrees to provide a second cutting edge, giving twice the blade life.
• The True Peel® low profile allows it to be used on tapping tee outlets with limited clearance, unlike conventional peelers with a large swing radius.