Milwaukee Battery Adapter Plate for the REED Pump Stick™ 

• Provides compatibility for extra battery options for REED Pump Stick™.
• Adapter plates fit most 18V lithium ion, current slide style Milwaukee® batteries.
• For strength, battery adapters plates are constructed of Delrin® or glass-filled polycarbonate.
• Swap the plate to fit common batteries – be sure to match the plate to operator’s battery brand.

NOTE:  REED Pump Stick is not for use on flammable liquids.

NOTE:  *Milwaukee® is a registered trademark of Milwaukee Tool and is not associated with Reed Manufacturing.  Battery adapter plate is offered as a convenience item and is not endorsed or warrantied by Milwaukee Tool.

REED Pump Stick™ Hose

• 2 foot, abrasion-resistant, industrial grade hose.
• Smooth interior ensures efficient water flow.
• Crush resistant for reliable water removal.
• Plastic, lightweight hose resists corrosion and remains flexible at low temperatures.
• Hose design includes magnetic hose connecter.
• Requires Hose Coupling #98147 to connect hoses for additional length.

NOTE:  REED Pump Stick is not for use on flammable liquids.

REED Pump Stick™ Hose

• 4 foot, abrasion-resistant, industrial grade hose.
• Smooth interior ensures efficient water flow.
• Crush resistant for reliable water removal.
• Plastic, lightweight hose resists corrosion and remains flexible at low temperatures.
• Hose design includes magnetic hose connecter.
• Requires Hose Coupling #98147 to connect hoses for additional length.

NOTE:  REED Pump Stick is not for use on flammable liquids.

REED Pump Stick™ Hose

• 6 foot (0.6 m), abrasion-resistant, industrial grade hose.
• Smooth interior ensures efficient water flow.
• Crush resistant for reliable water removal.
• Plastic, lightweight hose resists corrosion and remains flexible at low temperatures.
• Hose design includes magnetic hose connecter.
• Requires Hose Coupling #98147 to connect hoses for additional length.

NOTE:  REED Pump Stick is not for use on flammable liquids.

Helps filter particles for the REED Pump Stick™ 

• Removes debris before water enters the Pump Stick™.
• Filters out anything larger than bigger than .250” from entering the pump. This is about the size of pea gravel.
• This strainer is recommended only for clean water transfer such as pools and spas.
• Install screen inside end cap to keep secure during use.
• Operator must check screen during use to keep it clear for best pump action.

NOTE:  REED Pump Stick is not for use on flammable liquids.

Helps filter particles for the REED Pump Stick™ 

• Durable strainer made from stainless steel with 3/16” diameter holes.
• The strainer pulls water from the sides, not the bottom, to help prevent clogs and it keeps larger material from going through the pump.
• Fits REED Pump Stick™ CP15 models.
• Fits inside the molded end cap to stay securely in place.

NOTE:  REED Pump Stick is not for use on flammable liquids.

The REED Pump Stick™ Stand for hands free use of Pump Stick.

Applications for the battery operated liquid transfer pump are numerous due to the adaptable construction of the pump.

• Heavy-duty stand supports Pump Stick® for hands-free use.
• Attaches to Pump Stick® for operator relief during longer use times.
• Legs can be positioned in any orientation around the pump to suit the operator.
• For maximum stability, position the outlet hose opposite of the stand legs.

NOTE:  REED Pump Stick is not for use on flammable liquids.

Copper Shut-Off Tools are designed to shut-off and reshape Type K service line copper tube. The shut-off tool swings open to go handily around the pipe. Fine threads on the feed screw provide smooth, easy tightening using the ratchet drive handle. The support handle can be positioned in two different spots, depending on where there is clearance. The bottom open area of the shut-off tool is used to reround the copper tube after the repair to allow 70-75% return of flow. Generally there is no noticeable flow difference to the customer after the tube is rerounded. All parts are corrosion protected for long service life. Grease fittings for lubrication maintenance yield long tool life and easy operation.

• CSO1R shuts-off and reshapes 3/4” – 1” Type K copper tubing.
• Redesigned with detachable, ratchet drive handle, Reed’s CSO1R stores compactly in its included, heavy-duty case.
• They are designed only for use on soft copper tube service lines.
• Support handle can be positioned in two different, perpendicular angles for job demands.
• Steel castings provide superior tool strength.

Copper Shut-Off Tools are designed to shut-off and reshape Type K service line copper tube. The shut-off tool swings open to go handily around the pipe. Fine threads on the feed screw provide smooth, easy tightening using the ratchet drive handle. The support handle can be positioned in two different spots, depending on where there is clearance. The bottom open area of the shut-off tool is used to reround the copper tube after the repair to allow 70-75% return of flow. Generally there is no noticeable flow difference to the customer after the tube is rerounded. All parts are corrosion protected for long service life. Grease fittings for lubrication maintenance yield long tool life and easy operation.

• Shuts-off and reshapes 1 1/4” – 2” Type K copper tubing.
• Redesigned with detachable, ratchet drive handle, shut-off tools store compactly in a heavy-duty case.
• Intended only for use on soft copper tube service lines.
• Support handle can be positioned in two different, perpendicular angles for job demands.
• Threaded feed screw is zinc-plated for corrosion resistance.
• Hard anodized, aluminum castings of CSO2R models reduce tool weight and give long service life.

D Series Drill Bits are designed for use with Reed drilling machines and Mueller® E5/D5 only; both of which use saddles. 

• Drill Size: 11/16"
• Corp. Stop Size: 3/4" AWWA & NPT
• Recommended for cast iron and cement lined ductile iron.
• Spiral motion clears chips away from the cut.
• Heat-treated for longer life.
• Black-oxide coated for corrosion resistance.
• Made from strong, high-speed steel.

D Series Drill Bits are designed for use with Reed drilling machines and Mueller® E5/D5 only; both of which use saddles. 

• Drill Size: 7/8"
• Corp. Stop Size: 1" NPT
• Recommended for cast iron and cement lined ductile iron.
• Spiral motion clears chips away from the cut.
• Heat-treated for longer life.
• Black-oxide coated for corrosion resistance.
• Made from strong, high-speed steel.

D Series Drill Bits are designed for use with Reed drilling machines and Mueller® E5/D5 only; both of which use saddles. 

• Drill Size: 15/16"
• Corp. Stop Size: 1" AWWA
• Recommended for cast iron and cement lined ductile iron.
• Spiral motion clears chips away from the cut.
• Heat-treated for longer life.
• Black-oxide coated for corrosion resistance.
• Made from strong, high-speed steel.