Kit for NPT with hole saws and arbor in storage case

• Hot tap tool for piping, fittings and valves with NPT threads.
• Hot tap steel, galvanized, copper, brass or aluminum pipe for installing branch connections from 3/4” to 4” valves.
• Complete kit includes main body assembly, shafts, hole saw assortment, arbor and accessories in a storage case.
• REED Mechanical Hot Tapping Machine is the tapping machine only with valves, saddles, fittings and piping supplied by the operator.
•   
• Valve Size:  3/4" -4"

All REED DM3MECH models make branch connections through 3/4” to 4” valves on any appropriately sized mainline for most piping materials. With the right hole saw, these machines connect to chilled and hot water systems up to 300 psi and steam systems up to 15 psi without a shutdown of service This process is known as hot tapping.  The machine works for mild steel, galvanized steel, stainless steel, copper, brass and aluminum pipe.  Mechanical Hot Tapping Machine drills through the pipe wall via fittings inserted into the service saddle or thread-o-let. The machine eliminates the need to shut down, drain, cut, refit and refill piping systems.

DM3MECH consists of a main body assembly that fits into a 1 ¼” NPT fitting (not provided), along with ½” diameter shafts, hole saws, arbor, coupon retaining drill bit and more.

NOTES: 

• Hole saws are to be used per hole saw manufacturer's recommended RPM with a 3/8" or 1/2” drill motor.
• Not recommended for ammonia, gas or other caustic systems.
• This DM3MECH tool is not recommended for use on plastic pipe

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Other Parts impacted: 93500, 93501, 93502, 93503, 04561

CONTENTS

08350 DM3MECH HOT TAPPING OPERATOR'S MANUAL
08358 COUPON RETAINER 3/8 DIA MAGNET-3 PK
08359 COUPON RETAINER 1/4 DIA MAGNET-3 PK
40149 5/32 ALLEN WRENCH-LONG ARM HEX
40296 HEX WRENCH FOR DMHSA/PPR
04561 DRILL BIT, 1/4" X 4-5/16 LENGTH
99129 DRILL BIT, ¼” COUPON RETAINING
43514 ARBOR
93514 24" SHAFT, 1/2" DIA. W/HOLDER
93515 18" SHAFT, 1/2" DIA. W/SLEEVE
93526 TOOLBOX, PLASTIC
93527 MAIN BODY ASSEMBLY
43500 5/8" DIA. HOLE SAW
43501 7/8" DIA. HOLE SAW
43502 1 1/8" DIA. HOLE SAW
43503 1 3/8" DIA. HOLE SAW
43504 1 3/4" DIA. HOLE SAW
43505 2 1/4" DIA. HOLE SAW
43506 3 1/4" DIA. HOLE SAW
43512 H1 GREASE (3 oz. tube)

Base model for NPT in storage case, no hole saws or arbor

• Hot tap tool for piping, fittings and valves with NPT threads.
• Hot tap steel, galvanized, copper, brass or aluminum pipe for installing branch connections from 3/4” to 4” valves.
• Base model includes main body assembly, shafts, and accessories in a storage case; operator buys hole saws and arbor separately.
• Works with REED bi-metal hole saws or other common brands.
•   
• Valve Size:  3/4" -4"

All REED DM3MECH models make branch connections through 3/4” to 4” valves on any appropriately sized mainline for most piping materials. With the right hole saw, these machines connect to chilled and hot water systems up to 300 psi and steam systems up to 15 psi without a shutdown of service This process is known as hot tapping.  The machine works for mild steel, galvanized steel, stainless steel, copper, brass and aluminum pipe.  Mechanical Hot Tapping Machine drills through the pipe wall via fittings inserted into the service saddle or thread-o-let. The machine eliminates the need to shut down, drain, cut, refit and refill piping systems.

NOTES: 

• Hole saws are to be used per hole saw manufacturer's recommended RPM with a 3/8" or 1/2” drill motor.
• Not recommended for ammonia, gas or other caustic systems.
• This DM3MECH tool is not recommended for use on plastic pipe

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Other Parts impacted: 93500, 93501, 93502, 93503, 04561

CONTENTS

08350 DM3MECH HOT TAPPING OPERATOR'S MANUAL
08358 COUPON RETAINER 3/8 DIA MAGNET-3 PK
08359 COUPON RETAINER 1/4 DIA MAGNET-3 PK
40149 5/32 ALLEN WRENCH-LONG ARM HEX
40296 HEX WRENCH FOR DMHSA/PPR
04561 DRILL BIT, 1/4" X 4-5/16 LENGTH
99129 DRILL BIT, 1/4” COUPON RETAINING
93514 24", 1/2" DIA. SHAFT W/HOLDER
93515 18", 1/2" DIA. SHAFT W/SLEEVE
93526 TOOLBOX, PLASTIC
93527 MAIN BODY ASSEMBLY
43512 H1 GREASE (3 oz. tube)

Pilot drills are used with DM3MECH machines only as a guide for the hole saws.

• Length: 4.375"

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

 9-inch level with pitch measurements.

• Sturdy plastic frame with magnetic base.
• Working edges precision ground flat to sit flat.
• V-groove edge allows torpedo level to sit on pipe.
• Easy-to-read as white frames surround the yellow vials for contrast.
• Top view window for convenience.
• Vials read level, plumb, and 45°.
• Vial indicates pitch at 1/8”, 1/4” or 3/8” per foot without adjustments.
• Material: Aluminum
• Size: 5/8" x 1 1/4" x 9"