Kit with Beveler Adapter, Router Bit, DeWalt® Die Grinder, 2 Batteries and Charger

• Cordless power tool deburrs and bevels plastic pipe quickly.
• The kit includes the CPB adjustable beveler attachment, DeWalt® die grinder, battery and charger.
• Check the baseplate arrow for O.D. or I.D. which points to the direction to rotate the beveler around the pipe.
• Capacity: 2" and up
• Bevel Length RBIT1 - Adjustable 1/8" - 5/8"   (Included in Kit)
• Works exclusively with the DeWalt® 20V cordless die grinder.

For longer Bevel length of 7/16" - 1" order part# RBIT2 (SOLD SEPARATELY)

NOTE: If pipe is not stationary, a Reed pipe vise is recommended.

Bevel Boss™ cordless pipe bevelers quickly and safely bevel 2 inch diameter and larger plastic pipe. The tool's unique design makes REED Bevel Boss™ the only tool in the industry that provides a safe and speedy way to bevel. Cordless pipe beveler trims small to large diameter plastic pipe, including pipe already in the ditch. This lightweight tool significantly reduces prep time by quickly and consistently beveling when doing multiple cuts. These pipe bevelers are used on PVC and CPVC plastic pipe including C900, Corzan® CPVC, Bionax® PVCO (C909) and also ABS. Add bevels on most PVC glued joints and some sizes of bell and gasket joints. Adjustable for bevel length up to 1 inch, the required carbide RBIT1 and RBIT2 cut evenly and efficiently. Battery-powered, this cordless pipe beveler has no fumes! Plus, the guide plate eliminates guesswork about the cut and yields a consistent result. To eliminate damage to the gasket, a pipe bevel is required when installing into a pipe bell. Bevels on cement joints allow for even distribution of solvent cement glue to maximize glue contact area. Always defer to pipe manufacturer specifications for bevel recommendations.

In addition to complete beveling kits, there are Beveler Adapters to fit Milwaukee®, Bosch® or DeWalt® die grinders. Beveler adapters permit temporary conversion of the die grinder to serve as a beveler.

Cordless portable pipe beveler adapts to shape pipe interiors, too. For instance, electrical and utility contractors deburr to make pipe interiors snag-free for running wires. To create internal bevels on plastic pipe or conduit of 2 inch inside diameter (ID) or larger, add the REED beveler shroud with guide plate, CPBIDS. 

Power Source Specifications:

DeWalt® model DCG426B 20-Volt MAX XR Lithium-Ion Cordless Brushless Variable Speed Die Grinder

Kit with Beveler Adapter, Router Bit, DeWalt® Die Grinder and Battery (NO CHARGER)

• Cordless power tool deburrs and bevels plastic pipe quickly.
• The kit includes the CPB adjustable beveler attachment, DeWalt® die grinder and battery.
• Check the baseplate arrow for O.D. or I.D. which points to the direction to rotate the beveler around the pipe.
• Capacity: 2" and up
• Bevel Length RBIT1 - Adjustable 1/8" - 5/8"   (Included in Kit)
• Works exclusively with the DeWalt® 20V cordless die grinder.

For longer Bevel length of 7/16" - 1" order part# RBIT2 (SOLD SEPARATELY)

NOTE: If pipe is not stationary, a Reed pipe vise is recommended.

Bevel Boss™ cordless pipe bevelers quickly and safely bevel 2 inch diameter and larger plastic pipe. The tool's unique design makes REED Bevel Boss™ the only tool in the industry that provides a safe and speedy way to bevel. Cordless pipe beveler trims small to large diameter plastic pipe, including pipe already in the ditch. This lightweight tool significantly reduces prep time by quickly and consistently beveling when doing multiple cuts. These pipe bevelers are used on PVC and CPVC plastic pipe including C900, Corzan® CPVC, Bionax® PVCO (C909) and also ABS. Add bevels on most PVC glued joints and some sizes of bell and gasket joints. Adjustable for bevel length up to 1 inch, the required carbide RBIT1 and RBIT2 cut evenly and efficiently. Battery-powered, this cordless pipe beveler has no fumes! Plus, the guide plate eliminates guesswork about the cut and yields a consistent result. To eliminate damage to the gasket, a pipe bevel is required when installing into a pipe bell. Bevels on cement joints allow for even distribution of solvent cement glue to maximize glue contact area. Always defer to pipe manufacturer specifications for bevel recommendations.

In addition to complete beveling kits, there are Beveler Adapters to fit Milwaukee®, Bosch® or DeWalt® die grinders. Beveler adapters permit temporary conversion of the die grinder to serve as a beveler.

Cordless portable pipe beveler adapts to shape pipe interiors, too. For instance, electrical and utility contractors deburr to make pipe interiors snag-free for running wires. To create internal bevels on plastic pipe or conduit of 2 inch inside diameter (ID) or larger, add the REED beveler shroud with guide plate, CPBIDS. 

Power Source Specifications:

DeWalt® model DCG426B 20-Volt MAX XR Lithium-Ion Cordless Brushless Variable Speed Die Grinder

Kit with Beveler Adapter & DeWalt® Die Grinder.   Bit, Battery and Charger NOT INCLUDED.  For complete kit CPBDK

• Cordless power tool deburrs and bevels plastic pipe quickly.
• Base tool includes beveler adapter and DeWalt® die grinder ONLY.
• Runs on DeWalt® 20V battery, sold separately.
• Add required bit: RBIT1 and RBIT2, choosing from preferred size based on pipe diameter.
• Check the baseplate arrow for O.D. or I.D. which points to the direction to rotate the beveler around the pipe.
• Capacity: 2" and up
• Works exclusively with the DeWalt® 20V cordless die grinder.

NOTE: If pipe is not stationary, a Reed pipe vise is recommended.

Bevel Boss™ cordless pipe bevelers quickly and safely bevel 2 inch diameter and larger plastic pipe. The tool's unique design makes REED Bevel Boss™ the only tool in the industry that provides a safe and speedy way to bevel. Cordless pipe beveler trims small to large diameter plastic pipe, including pipe already in the ditch. This lightweight tool significantly reduces prep time by quickly and consistently beveling when doing multiple cuts. These pipe bevelers are used on PVC and CPVC plastic pipe including C900, Corzan® CPVC, Bionax® PVCO (C909) and also ABS. Add bevels on most PVC glued joints and some sizes of bell and gasket joints. Adjustable for bevel length up to 1 inch, the required carbide RBIT1 and RBIT2 cut evenly and efficiently. Battery-powered, this cordless pipe beveler has no fumes! Plus, the guide plate eliminates guesswork about the cut and yields a consistent result. To eliminate damage to the gasket, a pipe bevel is required when installing into a pipe bell. Bevels on cement joints allow for even distribution of solvent cement glue to maximize glue contact area. Always defer to pipe manufacturer specifications for bevel recommendations.

In addition to complete beveling kits, there are Beveler Adapters to fit Milwaukee®, Bosch® or DeWalt® die grinders. Beveler adapters permit temporary conversion of the die grinder to serve as a beveler.

Cordless portable pipe beveler adapts to shape pipe interiors, too. For instance, electrical and utility contractors deburr to make pipe interiors snag-free for running wires. To create internal bevels on plastic pipe or conduit of 2 inch inside diameter (ID) or larger, add the REED beveler shroud with guide plate, CPBIDS. 

Power Source Specifications:

DeWalt® model DCG426B 20-Volt MAX XR Lithium-Ion Cordless Brushless Variable Speed Die Grinder

Kit with Beveler Adapter, Router Bit, DeWalt® Die Grinder, Battery and Charger

• Cordless power tool deburrs and bevels plastic pipe quickly.
• The kit includes the CPB adjustable beveler attachment, DeWalt® die grinder, battery and charger.
• Check the baseplate arrow for O.D. or I.D. which points to the direction to rotate the beveler around the pipe.
• Capacity: 2" and up
• Bevel Length RBIT1 - Adjustable 1/8" - 5/8"   (Included in Kit)
• Works exclusively with the DeWalt® 20V cordless die grinder.

For longer Bevel length of 7/16" - 1" order part# RBIT2 (SOLD SEPARATELY)

NOTE: If pipe is not stationary, a Reed pipe vise is recommended.

Bevel Boss™ cordless pipe bevelers quickly and safely bevel 2 inch diameter and larger plastic pipe. The tool's unique design makes REED Bevel Boss™ the only tool in the industry that provides a safe and speedy way to bevel. Cordless pipe beveler trims small to large diameter plastic pipe, including pipe already in the ditch. This lightweight tool significantly reduces prep time by quickly and consistently beveling when doing multiple cuts. These pipe bevelers are used on PVC and CPVC plastic pipe including C900, Corzan® CPVC, Bionax® PVCO (C909) and also ABS. Add bevels on most PVC glued joints and some sizes of bell and gasket joints. Adjustable for bevel length up to 1 inch, the required carbide RBIT1 and RBIT2 cut evenly and efficiently. Battery-powered, this cordless pipe beveler has no fumes! Plus, the guide plate eliminates guesswork about the cut and yields a consistent result. To eliminate damage to the gasket, a pipe bevel is required when installing into a pipe bell. Bevels on cement joints allow for even distribution of solvent cement glue to maximize glue contact area. Always defer to pipe manufacturer specifications for bevel recommendations.

In addition to complete beveling kits, there are Beveler Adapters to fit Milwaukee®, Bosch® or DeWalt® die grinders. Beveler adapters permit temporary conversion of the die grinder to serve as a beveler.

Cordless portable pipe beveler adapts to shape pipe interiors, too. For instance, electrical and utility contractors deburr to make pipe interiors snag-free for running wires. To create internal bevels on plastic pipe or conduit of 2 inch inside diameter (ID) or larger, add the REED beveler shroud with guide plate, CPBIDS. 

Power Source Specifications:

DeWalt® model DCG426B 20-Volt MAX XR Lithium-Ion Cordless Brushless Variable Speed Die Grinder

• Add a vacuum to the Bevel Boss® as a convenient solution to suction beveling debris.
• Vacuum box connects to 1 1/4" suction hose to collect plastic chips.

Beveler produces a smooth 15° bevel on all types of plastic pipe, including gasketed PVC and C900 PVC in about one minute.

• Depending on wall thickness, the bevel can be up to 1 1/2” long.
• Beveler is easily adjusted for different pipe sizes and thicknesses, with no part changes.
• Bevel blade can be sharpened or replaced.
• Beveler only needs a few turns around the pipe to make the 15° smooth bevel.
• Strong, reinforced aluminum frame for durability.
• Adjusts to bevel multiple sizes with one tool.

NOTE: If pipe is not stationary, a Reed pipe vise is recommended.

Beveler produces a smooth 15° bevel on all types of plastic pipe, including gasketed PVC and C900 PVC in about one minute.

• Depending on wall thickness, the bevel can be up to 1 1/2” long.
• Beveler is easily adjusted for different pipe sizes and thicknesses, with no part changes.
• Bevel blade can be sharpened or replaced.
• Beveler only needs a few turns around the pipe to make the 15° smooth bevel.
• Strong, reinforced aluminum frame for durability.
• Adjusts to bevel multiple sizes with one tool.

NOTE: If pipe is not stationary, a Reed pipe vise is recommended.

Adapts Bosch® die grinder to serve as REED Portable Pipe Beveler

• Adapt operator's own Bosch® die grinder to serve as a plastic pipe beveler for exterior bevels.
• Operator safety is important and the REED system provides a secure way to cut a consistent bevel quickly.
• Adjust the bevel length on pipe by choosing the correct router bit RBIT1 1/8" - 5/8" or RBIT2 7/16" - 1"
• Only tool in the industry that provides a quick, easy and safe way to bevel plastic pipe.
• Ideal for small to large diameter plastic pipe, including stationary pipe already in the ditch.

Router Bits RBIT1 and RBIT2 SOLD SEPARATELY

Power Source Specifications:  (NOT INCLUDED)

Bosch® DGSH181BL Die Grinder

Bosch® SKC181-101 18V Lithium-Ion Battery & Charger Kit

Adapts DeWalt® die grinder to serve as REED Portable Pipe Beveler

• Adapt operator's own DeWalt® die grinder to serve as a plastic pipe beveler for exterior bevels.
• Operator safety is important and the REED system provides a secure way to cut a consistent bevel quickly.
• Adjust the bevel length on pipe by choosing the correct router bit RBIT1 1/8" - 5/8" or RBIT2 7/16" - 1"
• Only tool in the industry that provides a quick, easy and safe way to bevel plastic pipe.
• Ideal for small to large diameter plastic pipe, including stationary pipe already in the ditch.

Router Bits RBIT1 and RBIT2 SOLD SEPARATELY

Power Source Specifications:  (NOT INCLUDED)

DeWalt® model DCG426B 20-Volt MAX XR Lithium-Ion Cordless Brushless Variable Speed Die Grinder

Beveler Shroud for internal bevel on plastic pipe 2" ID or larger

• Optional accessory CPBIDS rapidly bevels pipe 2” ID and larger internal diameters.
• Great solution for deburring the inside of pipe to eliminate snags.
• Add to CPBKIT exterior beveler kit to add capability of interior diameter bevels.

NOTE: If pipe is not stationary, a Reed pipe vise is recommended.

Adapts Milwaukee® die grinder Model 2784-20 or 2784-22 to serve as REED Portable Pipe Beveler

• Adapt operator's own Milwaukee® die grinder Model 2784-20 or 2784-22 to serve as a plastic pipe beveler for exterior bevels.
• Operator safety is important and the REED system provides a secure way to cut a consistent bevel quickly.
• Adjust the bevel length on pipe by choosing the correct router bit RBIT1 1/8" - 5/8" or RBIT2 7/16" - 1"
• Only tool in the industry that provides a quick, easy and safe way to bevel plastic pipe.
• Ideal for small to large diameter plastic pipe, including stationary pipe already in the ditch.

Router Bits RBIT1 and RBIT2 SOLD SEPARATELY

Power Source Specifications:  (NOT INCLUDED)

Milwaukee® models 2784-20 and 2784-22 M18™ FUEL 18-Volt Lithium-Ion Brushless Cordless 1/4 in. Die Grinder

Adapts Milwaukee® die grinder Model 2939-20 or 2984-20 to serve as REED Portable Pipe Beveler

• Adapt operator's own Milwaukee® die grinder Model 2939-20 or 2984-20 to serve as a plastic pipe beveler for exterior bevels.
• Operator safety is important and the REED system provides a secure way to cut a consistent bevel quickly.
• Adjust the bevel length on pipe by choosing the correct router bit RBIT1 1/8" - 5/8" or RBIT2 7/16" - 1"
• Only tool in the industry that provides a quick, easy and safe way to bevel plastic pipe.
• Ideal for small to large diameter plastic pipe, including stationary pipe already in the ditch.

Router Bits RBIT1 and RBIT2 SOLD SEPARATELY

Power Source Specifications:  (NOT INCLUDED)

Milwaukee® models 2939-20 and 2984-20 M18 FUEL™ cordless die grinders.