Used to connect two different sizes of SDR35 ASTM D3034, D2729 & Triplewall, F810 pipe

• One end fits into SDR35 ASTM D3034 fitting or pipe bell
• One end fits over SDR35 ASTM D3034 pipe
• NOT FOR PRESSURE

Internal Pushfit connection - Connects two pipes having an I.D. range of: 5.83”-6.02"

Benefits

• Ideal for the connection of plastic PVC SDR35, PVC Schedule 40, Cast Iron and Copper. Does not work for SDR-26
• Can be installed in 30 seconds or less
• Install in sheared off pipe where standard couplings cannot be used
• No need to expose external surface of pipe
• Meets the requirements of ASTM C1173
• Watertight connection on any pipe material
• Connects pipes of differing or irregular outside diameters
• Pipe stop indicates that the product is properly installed, when it is flush to the pipe end
• Internal lip ensures smooth transition • Rigid ABS Body provides excellent shear resistance
• 4.3 PSI test pressure
• ABS Sleeve
• EPDM Gasket

Installation

Step 1: Clean and measure pipe I.D.

Step 2: Lubricate gasket O.D. with dish soap

Step 3: Push in place up to the pipe stop

Step 4: Lubricate gasket and install 2nd pipe

Ensure that the tapered edge on the rubber sleeve does not fold back when inserting into the pipe.

Strong. Flexible. Steel Reinforced Universal Coupling. - Connects two pipes having an O.D. range of: 6.20"-8.00"

One coupling per nominal pipe size connects:

• Clay
• Concrete
• Ductile Iron
• Orangeburg
• Asbestos Cement
• Duriron
• Cast Iron
• Steel
• Plastic

*See chart for specific connections  Add Spec Sheet Link

Benefits

• One universal coupling per nominal size connects most pipe materials
• Heavy duty, multi-dimensional, non-shear sewer & drain coupling
• Stabilizes the connection against shear forces
• Complies with the material and performance requirements of ASTM C1173
• Heavy duty corrosion resistant high torque 316 series stainless steel clamps
• Stainless Steel Ribbed Construction
• Available Sizes: 4", 5", 6", 8", 10" & 12"

Used to plug off cleanout access points

• Fits into female pipe threads

Used to plug off cleanout access points

• Fits into female pipe threads

Used to make bend in the line

• Both ends fits over Schedule 40 DWV pipe
• CALL FOR OTHER SIZES

Used to make bend in the line

• Both ends fits over Schedule 40 DWV pipe
• CALL FOR OTHER SIZES

Used to make bend in the line

• Both ends fit over Schedule 40 DWV pipe
• Drainage applications ONLY
• CALL FOR LARGER SIZES

Used to make bend in the line

• Both ends fits over Schedule 40 DWV pipe
• CALL FOR OTHER SIZES

Used to cap off pipe

• Fits over Schedule 40 DWV pipe
• CALL FOR LARGER SIZES

Used to allow cleanout access

• One end fits into Schedule 40 DWV fitting or bell
• One end accepts MPT cleanout plug
• CALL FOR OTHER SIZES