The 24" riser fiberglass-reinforced Safety Star system from Infiltrator is a strong secondary level of protection if a primary riser lid is unknowingly damaged or removed. The Safety Star system prevents unintended entry into the tank.
Benefits:
Sits inside the riser stack at any desired level
Strong glass-reinforced polypropylene construction
Fastened in place with stainless steel screws
Structural design withstands a dead load up to 300 lbs
Meets regulatory requirements as a secondary septic tank lid
The EZsnap riser is designed to create an easy-to-assemble watertight riser system for septic tanks, pump tanks, and cisterns. The EZsnap Riser features click and lock technology, eliminating the need for assembly tools, sealant/caulk and hardware.
ATL by Infiltrator is a passive advanced treatment leachfield system designed as an environmentally friendly alternative to traditional stone and pipe drainfields. The ATL system is a sand-lined treatment and dispersal leachfield system consisting of 6 components.
How It Works
Upon entering the system, septic tank effluent progresses through each component listed below.
4" diameter pipe
Large-diameter synthetic aggregate
Fine geotextile
Small-diameter synthetic aggregate
Coarse geotextile
6" thick system sand
Benefits:
Produces Class 1 (EPA Secondary) Treated Effluent
A Passive Advanced Treatment Leachfield _ No Moving Parts or Power Required
Modules are Quick and Easy to Install
Shallow System Maximizes Site Suitability and Reduces Amount of Sand Fill Requirements
ATL by Infiltrator is a passive advanced treatment leachfield system designed as an environmentally friendly alternative to traditional stone and pipe drainfields. The ATL system is a sand-lined treatment and dispersal leachfield system consisting of 6 components.
How It Works
Upon entering the system, septic tank effluent progresses through each component listed below.
4" diameter pipe
Large-diameter synthetic aggregate
Fine geotextile
Small-diameter synthetic aggregate
Coarse geotextile
6" thick system sand
Benefits:
Produces Class 1 (EPA Secondary) Treated Effluent
A Passive Advanced Treatment Leachfield _ No Moving Parts or Power Required
Modules are Quick and Easy to Install
Shallow System Maximizes Site Suitability and Reduces Amount of Sand Fill Requirements
Suitable for use as a pump tank, septic tank or rainwater tank in shallow, multiple, and serial tank configurations.
The Infiltrator CM-1060 is a lightweight, strong and durable septic tank. This watertight tank design is offered with Infiltrator’s line of custom-fit risers and heavy-duty lids. Infiltrator compression molded tanks provide a revolutionary improvement in thermoplastic septic tank design, offering exceptional long-term strength and watertightness.
Do not install the tank in vehicular traffic areas. The tank is designed for non-traffic applications.
Benefits:
Strong compression molded polypropylene construction
Lightweight plastic construction and inboard lifting lugs allow for easy delivery and handling
Integral heavy-duty green lids that interconnect with EZsnap risers and pipe riser solutions
Structurally reinforced access ports eliminate distortion during installation and pump-outs
Reinforced structural ribbing and fiberglass bulkheads offer additional strength
Can be installed with 6” to 48” (152 to 1,219 mm) of cover
Can be pumped dry during pump-outs
Suitable for use as a septic tank, pump tank, or rainwater (non-potable) tank
No special water filling requirements are necessary
The tank may be backfilled with suitable native soil. Seeinstallation instructions for guidance.
Specifications:
Size 61.7"W x 134"L x 54.5"H (1567 mm x 3409 mm x 1384 mm)
Two Access Ports Each 24" (610 mm)
Weight 331 lbs (151 kg)
Total Capacity 1309 gal (4956 L)
Working Capacity 1111 gal (4207 L)
Burial Depth Minimum 6" (152 mm) Maximum 48" (1219 mm)
Suitable for use as a pump tank, septic tank or rainwater tank in shallow, multiple, and serial tank configurations.
The Infiltrator IM-1250 is a lightweight strong and durable septic tank. This watertight tank design is offered with Infiltrator’s line of custom-fit risers and heavy-duty lids. Infiltrator injection molded tanks provide a revolutionary improvement in plastic septic tank design, offering long-term exceptional strength and watertightness.
Do not install the tank in vehicular traffic areas. The tank is designed for non-traffic applications.
Benefits:
Strong injection molded polypropylene construction
Lightweight plastic construction and inboard lifting lugs allow for easy delivery and handling
Structurally reinforced access ports eliminate distortion during installation and pump-outs
Reinforced structural ribbing and fiberglass bulkheads offers additional strength
Can be installed with 6" to 48" of cover
Can be pumped dry during pump-outs
Suitable for use as a septic tank, pump tank, or rainwater (non-potable) tank
No special installation, backfill or water filling procedures are required
No special water filling requirements are necessary
The tank may be backfilled with suitable native soil. See installation instructions for guidance.
Specifications:
Size 61.7"W x 152.3"L x 54.6"H (1567 mm x 3868 mm x 1387 mm)
Two Access Ports 24" (610 mm)
Weight 405 lbs (184 kg)
Total Capacity 1480 gal (5602 L)
Working Capacity 1278 gal (4839 L)
Burial Depth Minimum 6" (152 mm) Maximum 48" (1219 mm)
Suitable for use as a pump tank, septic tank or rainwater tank in shallow, multiple, and serial tank configurations.
The Infiltrator IM-1530 is a lightweight strong and durable septic tank. This watertight tank design is offered with Infiltrator’s line of custom-fit risers and heavy-duty lids. Infiltrator injection molded tanks provide a revolutionary improvement in plastic septic tank design, offering long-term exceptional strength and watertightness.
Do not install the tank in vehicular traffic areas. The tank is designed for non-traffic applications.
Benefits:
Strong injection molded polypropylene construction
Lightweight plastic construction and inboard lifting lugs allow for easy delivery and handling
Structurally reinforced access ports eliminate distortion during installation and pump-outs
Reinforced structural ribbing and fiberglass bulkheads offers additional strength
Can be installed with 6" to 48" of cover
Can be pumped dry during pump-outs
Suitable for use as a septic tank, pump tank, or rainwater (non-potable) tank
No special installation, backfill or water filling procedures are required
No special water filling requirements are necessary
The tank may be backfilled with suitable native soil. See installation instructions for guidance.
Specifications:
Size 62"W x 176"L x 55"H (1567 mm x 4460 mm x 1384 mm)
Access Port 24" (610 mm)
Weight 501 lbs (228 kg)
Total Capacity 1787 gal (6765 L)
Working Capacity 1537 gal (5818 L)
Burial Depth Minimum 6" (152 mm) Maximum 48" (1219 mm)
The Infiltrator IM-300 is a lightweight, strong and durable pump tank. This watertight tank design is offered with Infiltrator’s line of custom-fit risers and heavy-duty lids. Infiltrator injection molded tanks provide a revolutionary improvement in plastic tank design, offering exceptional long-term strength and watertightness.
Do not install the tank in vehicular traffic areas. The tank is designed for non-traffic applications.
Benefits:
Strong injection molded polypropylene construction
Lightweight plastic construction and inboard lifting lugs allow for easy delivery and handling
Structurally reinforced access ports eliminate distortion during installation and pump-outs
Reinforced structural ribbing and fiberglass bulkheads offers additional strength
Can be installed with 6" to 48" of cover
Can be pumped dry during pump-outs
Suitable for use as a septic tank, pump tank, or rainwater (non-potable) tank
No special installation, backfill or water filling procedures are required
No special water filling requirements are necessary
The tank may be backfilled with suitable native soil. See installation instructions for guidance.
Specifications:
Size 50.9"W x 50.9"L x 50.5"H (1293 mm x 1293 mm x 1283 mm)
Two Access Ports 24" (610 mm)
Weight 110 lbs (50 kg)
Total Capacity 322 gal (1219 L)
Working Capacity 278 gal (1052 L)
Burial Depth Minimum 6" (152 mm) Maximum 52" (1321 mm)
Suitable for use as a pump tank, trash-tank, rainwater (non-potable) tank, or as the second compartment of an in-series septic tank.
The Infiltrator IM-540 is a lightweight strong and durable septic/pump tank. This watertight tank design is offered with Infiltrator’s line of custom-fit risers and heavy-duty lids. Infiltrator injection molded tanks provide a revolutionary improvement in plastic tank design, offering long-term exceptional strength and watertightness.
Do not install the tank in vehicular traffic areas. The tank is designed for non-traffic applications.
Benefits:
Strong injection molded polypropylene construction
Lightweight plastic construction and inboard lifting lugs allow for easy delivery and handling
Structurally reinforced access ports eliminate distortion during installation and pump-outs
This end cap features pipe cutouts on the right and left column designed to accommodate inspection ports, clean outs, or inlet pipes on either side of the end cap. These pipe locations allow easy access for maintenance and alignment when running pressure pipe through the chamber. The Quick4 Plus™ All-in-One 8 Endcap may be used at either end of a chamber row or can be installed mid-trench for an inspection port, cleanout or inlet/outlet pipe. The mid-trench connection feature allows construction of chamber rows with center feed inletting for easy installation of serial distribution systems. Pipe connection options allow for side, end or top inletting.
Benefits:
May be used at the end of chamber row for an inlet/outlet or can be installed mid-trench
Mid-trench connection feature allows center feed inletting of chamber rows
Center-feed connection allows for easy installation of serial distribution systems
Variable pipe connection options allow for side, end or top inletting
Piping drill points are set for gravity or pressure pipe
