Also Available: Contractor Pack of 12 grates 

Click here for box of 12 Gray NDS241_BX 

Grate only - Fits NDS Spee-D Channel

Features

• Actual dimension 4 1/8" x 24" x 3/4"
• Requires 4 #229 Screws
• Structural foam polyolefin channel grate with UV inhibitor
• Open surface area 19.3 square inches per foot / 25.28 GPM per foot
• ADA Compliant / Heel Proof
• Recommended for medium-duty pneumatic tire traffic, autos and light trucks at speeds less than 20 mph
• Class B Load Rating: 61-175 psi
• See Technical Specs • Product Brochures & Specifications for installation recommendations

Individual grates available NDS Spee-D Grate

Grate only - Fits NDS Spee-D Channel

Features

• Actual dimension 4 1/8" x 24" x 3/4"
• Requires 4 #229 Screws
• Structural foam polyolefin channel grate with UV inhibitor
• Open surface area 19.3 square inches per foot / 25.28 GPM per foot
• ADA Compliant / Heel Proof
• Recommended for medium-duty pneumatic tire traffic, autos and light trucks at speeds less than 20 mph
• Class B Load Rating: 61-175 psi
• See Technical Specs • Product Brochures & Specifications for installation recommendations

Also Available: Contractor Pack of 12 grates 

Click here for box of 12 Green NDS242_BX 

Grate only - Fits NDS Spee-D Channel

Features

• Actual dimension 4 1/8" x 24" x 3/4"
• Requires 4 #229 Screws
• Structural foam polyolefin channel grate with UV inhibitor
• Open surface area 19.3 square inches per foot / 25.28 GPM per foot
• ADA Compliant / Heel Proof
• Recommended for medium-duty pneumatic tire traffic, autos and light trucks at speeds less than 20 mph
• Class B Load Rating: 61-175 psi
• See Technical Specs • Product Brochures & Specifications for installation recommendations

Individual grates available NDS Spee-D Grate

Grate only - Fits NDS Spee-D Channel

Features

• Actual dimension 4 1/8" x 24" x 3/4"
• Requires 4 #229 Screws
• Structural foam polyolefin channel grate with UV inhibitor
• Open surface area 19.3 square inches per foot / 25.28 GPM per foot
• ADA Compliant / Heel Proof
• Recommended for medium-duty pneumatic tire traffic, autos and light trucks at speeds less than 20 mph
• Class B Load Rating: 61-175 psi
• See Technical Specs • Product Brochures & Specifications for installation recommendations

Also Available: Contractor Pack of 12 grates 

Click here for box of 12  Sand NDS244_BX 

Grate only - Fits NDS Spee-D Channel

Features

• Actual dimension 4 1/8" x 24" x 3/4"
• Requires 4 #229 Screws
• Structural foam polyolefin channel grate with UV inhibitor
• Open surface area 19.3 square inches per foot / 25.28 GPM per foot
• ADA Compliant / Heel Proof
• Recommended for medium-duty pneumatic tire traffic, autos and light trucks at speeds less than 20 mph
• Class B Load Rating: 61-175 psi
• See Technical Specs • Product Brochures & Specifications for installation recommendations

Individual grates available NDS Spee-D Grate

Grate only - Fits NDS Spee-D Channel

Features

• Actual dimension 4 1/8" x 24" x 3/4"
• Requires 4 #229 Screws
• Structural foam polyolefin channel grate with UV inhibitor
• Open surface area 19.3 square inches per foot / 25.28 GPM per foot
• ADA Compliant / Heel Proof
• Recommended for medium-duty pneumatic tire traffic, autos and light trucks at speeds less than 20 mph
• Class B Load Rating: 61-175 psi
• See Technical Specs • Product Brochures & Specifications for installation recommendations

Also Available: Contractor Pack of 12 grates 

Click here for box of 12 White NDS240_BX

Grate only - Fits NDS Spee-D Channel

Features

• Actual dimension 4 1/8" x 24" x 3/4"
• Requires 4 #229 Screws
• Structural foam polyolefin channel grate with UV inhibitor
• Open surface area 19.3 square inches per foot / 25.28 GPM per foot
• ADA Compliant / Heel Proof
• Recommended for medium-duty pneumatic tire traffic, autos and light trucks at speeds less than 20 mph
• Class B Load Rating: 61-175 psi
• See Technical Specs • Product Brochures & Specifications for installation recommendations

Grate only - Fits NDS Spee-D Channel

Features

• Actual dimension
• Galvanized Metal Grate
• 43.6 GPM per foot with 1/2" head pressure
• Recommended for medium-duty pneumatic tire traffic, autos and light trucks at speeds less than 20 mph
• Class B Load Rating: 61-175 psi
• See Technical Specs • Product Brochures & Specifications for installation recommendations

Transform your channel drain applications to form natural curves on hardscapes with the Spee-D® Contour™ channel drain. Whether you’re creating open curves or closed loops, this channel drain redefines what’s possible to elevate your projects with less installation time and hassle.

Applications: Pools and Patios, Fountains, Sunken Fire Pits, Splash Pads

Spee-D® Channel Drain Family
Integrates seamlessly with the Spee-D® channel drain and accessories such as the coupling, end cap, and end outlet to create unique, custom projects.

Features

• Make natural curves in your channel drain system that are quick and easy to install along irregular or curved hardscapes
• Ideal for following contours of free-form pool decks and patios, fountains, splash pads, fire pits, and similar hardscape areas
• Connects with other middle channels to form organic curves and bends in the channel drain run or to form a closed loop
• Precise turns - Once assembled, sections create a pivot joint that provides 0 to 9 degrees of angular motion to rotate sections to the desired angle
• Smooth install - Patented design makes channel assembly easy; Spee-D® Contour™ middle sections connect without couplings
• Compatible with Spee-D® Contour™ channel drain additional middle sections to form curves or closed loops; compatible with start and end sections to transition to straight Spee-D channel drains
• Rated for NDS Class B loads (up to 175 psi) when properly installed—recommended for medium-duty pneumatic tire traffic, autos, and light trucks at speeds less than 20 mph; ADA compliant; treated with UV inhibitors to prevent fading and cracking
• As part of a complete drainage system, the Spee-D® Contour middle section connects with other middle sections to create a curved channel drain design or connects to start and end sections
• Comes with one Spee-D® Contour™ channel drain middle section, one gray grate, and two grate screws
• NDS400-ACSE-WH Start and End Section Kit with Gray Grates is required to connect to straight channel sections, outlets and other components in the Spee-D Drain family

• Fits: NDS Spee-D Channel Drains #400 (4-Foot Section), #400-10 (10-Foot Section) with NDS400-ACSE-WH Start and End Section Kit with Gray Grates
• No couplings required between the Spee-D Contour. Pieces snap together for a secure fit.
• Use with Start & End Kit to transition to straight Spee-D channel drains
• Couplings are required to connect to the straight runs and other components of the Spee-D family. 
• Deflection: 0-9 Degrees
• Flow Rate: 51 GPM
• Open Surface Area: 16.8 sq in per linear ft. 

Transform your channel drain applications to form natural curves on hardscapes with the Spee-D® Contour™ channel drain. Whether you’re creating open curves or closed loops, this channel drain redefines what’s possible to elevate your projects with less installation time and hassle.

Applications: Pools and Patios, Fountains, Sunken Fire Pits, Splash Pads

Spee-D® Channel Drain Family
Integrates seamlessly with the Spee-D® channel drain and accessories such as the coupling, end cap, and end outlet to create unique, custom projects.

Features

• Make natural curves in your channel drain system that are quick and easy to install along irregular or curved hardscapes
• Ideal for following contours of free-form pool decks and patios, fountains, splash pads, fire pits, and similar hardscape areas
• Connects to middle sections to transition from the Spee-D® Contour™ channel drain to the straight Spee-D channel drain; Start & End kit is not required for closed loop drainage designs
• Precise turns - Once assembled, sections create a pivot joint that provides 0 to 9 degrees of angular motion to rotate sections to the desired angle
• Smooth install - Patented design makes channel assembly easy; use couplings to connect Spee-D® Contour™ start and end sections to the Spee-D channel drain; middle sections connect to start and end sections without couplings
• Compatible with Spee-D® channel drain and accessories for smooth transitions from curved to straight channel drains; works with a wide array of Spee-D® accessories such as the end cap, end outlet, offset end outlet, coupling, strainer coupling, channel with bottom outlet
• Rated for NDS Class B loads (up to 175 psi) when properly installed—recommended for medium-duty pneumatic tire traffic, autos, and light trucks at speeds less than 20 mph; ADA compliant; treated with UV inhibitors to prevent fading and cracking
• Comes with Spee-D® Contour™ channel drain start and end sections, two gray grates, and four grate screws
• NDS400-ACSE-WH Start and End Section Kit with Gray Grates is required to connect NDS400-ACM-WH Spee-D® Contour™ Channel Drain Middle Section and Gray Grate to straight channel sections, outlets and other components in the Spee-D Drain family

• Fits: NDS Spee-D Channel Drains #400 (4-Foot Section), #400-10 (10-Foot Section) 
• No couplings required between the Spee-D Contour Middle, Start and Ends. Pieces snap together for a secure fit.
• Couplings are required to connect to the straight runs and other components of the Spee-D family. 
• Deflection: 0-9 Degrees
• Flow Rate: 51 GPM
• Open Surface Area: 16.8 sq in per linear ft.