Money-saving reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused.

• Kit with PPR75 (3/4"), PPR100 (1"), PPR125 (1 1/4"), PPR150 (1 1/2"), PPR200 (2"), PPR300 (3"), PPR400 (4") in a hard plastic case
• Reams Sch. 40 PVC, CPVC & ABS Fittings
• Plastic Pipe Fitting Reamers fit into standard ½” drills.
• PPR reamers work great for vent lines, drain lines, and water lines.
• Its carbide cutting insert provides a cutting edge on each side.
• Rotate before replacement and receive three bonus cutting edges.
• Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.

NOTE: REED plastic pipe reamers (Clean Ream Extreme® and Clean Ream Plus®) work with North America pipe diameters as they fit specific ID/OD for reaming work.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.

• Application: Muffler Systems Tubing
• FITS:
• Reed Cutter: TC3Q; TC4Q; TC5Q; TC6Q; TC8Q
• Ridgis Cutter: 30; 40; 106; 108; 109; 133; 134; 154; 136; 156

• Blade Exposure: 0.188"  Blade Exposure determines wall thickness capacity of cutter wheel.
• All Reed cutter wheels are made from high shock-resistant tool steel.
• By using this higher quality raw material, Reed cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr.
• Also, because of their higher quality, certified material, only Reed cutter wheels can be heat-treated for the perfect balance between hardness and toughness to make Reed cutter wheels resist breakage and last longer.
• Reed offers the largest cutter wheel line for all types of pipe, tubing and conduit. 

Rotary style pipe cutters are a REED invention! REED Rotary™ pipe cutters cut pipe safely, easily, quickly, and at a low cost. Provides a square cut and can be used in close quarters anywhere – in the ditch, underwater, in noise-free zones, over head, in racks of pipes, etc. REED Rotary™ pipe cutters last for decades.

• Pipe snaps off squarely once the operator completes the cut.
• Spoked frame design allows for multiple handle attachment positions for operator to pull the cutter around the pipe.
• Excellent for cold cuts.
• Designed to cut large diameter pipe.
• Change the cutter wheels to use same cutter for different types of pipe

• Application:
• Cast or Ductile Iron  
• (Includes pipe schedule listed plus all lower schedules of same pipe type.)
• Pipe Capacity: Cast or Ductile Iron Nominal 18" - 20" 
• Cutter Wheel: RCI8-30
• Length: 106"
• Weight: 89 lbs

NOTE: Rotary™ Pipe Cutters must ship via truck freight.

Rotary style pipe cutters are a REED invention! REED Rotary™ pipe cutters cut pipe safely, easily, quickly, and at a low cost. Provides a square cut and can be used in close quarters anywhere – in the ditch, underwater, in noise-free zones, over head, in racks of pipes, etc. REED Rotary™ pipe cutters last for decades.

• Pipe snaps off squarely once the operator completes the cut.
• Spoked frame design allows for multiple handle attachment positions for operator to pull the cutter around the pipe.
• Excellent for cold cuts.
• Designed to cut large diameter pipe.
• Change the cutter wheels to use same cutter for different types of pipe

• Application: 
• Sch. 80 Stainless / Sch. 40 Steel 20" 
• (Includes pipe schedule listed plus all lower schedules of same pipe type.)
• Pipe Capacity Steel Nominal: 20" - 22" 
• Cutter Wheel: RCS8-36
• Length: 106"
• Weight: 89 lbs

NOTE: Rotary™ Pipe Cutters must ship via truck freight.

Rotary style pipe cutters are a REED invention! REED Rotary™ pipe cutters cut pipe safely, easily, quickly, and at a low cost. Provides a square cut and can be used in close quarters anywhere – in the ditch, underwater, in noise-free zones, over head, in racks of pipes, etc. REED Rotary™ pipe cutters last for decades.

• Larger blade exposure (.800” / 20.3 mm) of RCX cutter wheels allows cutter to penetrate the thick pipe walls of steel, heavy wall steel and stainless steel.
• One set (8) of RC8-30XR Rollers #93222 are installed on the cutter. These are required when using RCX cutter wheels.
• Pipe snaps off squarely once the operator completes the cut.
• Excellent for cold cuts.
• Designed to cut large diameter pipe.

• Application: 
• Sch. 80 Stainless / Sch. 40 Steel 20" 
• (Includes pipe schedule listed plus all lower schedules of same pipe type.)
• Pipe Capacity Steel Nominal: 20" - 22" 
• Cutter Wheel: RCX
• Length: 106"
• Weight: 89 lbs

NOTE: Rotary™ Pipe Cutters must ship via truck freight.

Rotary style pipe cutters are a REED invention! REED Rotary™ pipe cutters cut pipe safely, easily, quickly, and at a low cost. Provides a square cut and can be used in close quarters anywhere – in the ditch, underwater, in noise-free zones, over head, in racks of pipes, etc. REED Rotary™ pipe cutters last for decades.

• Pipe snaps off squarely once the operator completes the cut.
• Spoked frame design allows for multiple handle attachment positions for operator to pull the cutter around the pipe.
• Excellent for cold cuts.
• Designed to cut large diameter pipe.
• Change the cutter wheels to use same cutter for different types of pipe

• Application:
• Cast or Ductile Iron
• (Includes pipe schedule listed plus all lower schedules of same pipe type.)
• Pipe Capacity: Cast or Ductile Iron Nominal: 22" - 24" 
• Cutter Wheel: RCI8-30
• Length: 111"
• Weight: 107 lbs

NOTE: Rotary™ Pipe Cutters must ship via truck freight.

Rotary style pipe cutters are a REED invention! REED Rotary™ pipe cutters cut pipe safely, easily, quickly, and at a low cost. Provides a square cut and can be used in close quarters anywhere – in the ditch, underwater, in noise-free zones, over head, in racks of pipes, etc. REED Rotary™ pipe cutters last for decades.

• Pipe snaps off squarely once the operator completes the cut.
• Spoked frame design allows for multiple handle attachment positions for operator to pull the cutter around the pipe.
• Excellent for cold cuts.
• Designed to cut large diameter pipe.
• Change the cutter wheels to use same cutter for different types of pipe

• Application: 
• Sch. 80 Stainless / Sch. 30 Steel 24"
• Sch. 80 Stainless / Sch. 30 Steel 26"
• (Includes pipe schedule listed plus all lower schedules of same pipe type.)
• Pipe Capacity Steel Nominal: 24" - 26" 
• Cutter Wheel: RCS8-36
• Length: 111"
• Weight: 107 lbs

NOTE: Rotary™ Pipe Cutters must ship via truck freight.

Rotary style pipe cutters are a REED invention! REED Rotary™ pipe cutters cut pipe safely, easily, quickly, and at a low cost. Provides a square cut and can be used in close quarters anywhere – in the ditch, underwater, in noise-free zones, over head, in racks of pipes, etc. REED Rotary™ pipe cutters last for decades.

• Larger blade exposure (.800” / 20.3 mm) of RCX cutter wheels allows cutter to penetrate the thick pipe walls of steel, heavy wall steel and stainless steel.
• One set (8) of RC8-30XR Rollers #93222 are installed on the cutter. These are required when using RCX cutter wheels.
• Pipe snaps off squarely once the operator completes the cut.
• Spoked frame design allows for multiple handle attachment positions for operator to pull the cutter around the pipe.
• Excellent for cold cuts.
• Designed to cut large diameter pipe.

• Application: 
• Sch. 80 Stainless / Sch. 40 Steel 24"
• Sch. 80 Stainless / Sch. 20 Steel / Extra Heavy Steel 26"
• (Includes pipe schedule listed plus all lower schedules of same pipe type.)
• Pipe Capacity Steel Nominal: 24" - 26" 
• Cutter Wheel: RCX
• Length: 111"
• Weight: 107 lbs

NOTE: Rotary™ Pipe Cutters must ship via truck freight.

Rotary style pipe cutters are a REED invention! REED Rotary™ pipe cutters cut pipe safely, easily, quickly, and at a low cost. Provides a square cut and can be used in close quarters anywhere – in the ditch, underwater, in noise-free zones, over head, in racks of pipes, etc. REED Rotary™ pipe cutters last for decades.

• Pipe snaps off squarely once the operator completes the cut.
• Spoked frame design allows for multiple handle attachment positions for operator to pull the cutter around the pipe.
• Excellent for cold cuts.
• Designed to cut large diameter pipe.
• Change the cutter wheels to use same cutter for different types of pipe

• Application:
• Cast or Ductile Iron
• (Includes pipe schedule listed plus all lower schedules of same pipe type.)
• Pipe Capacity: Cast or Ductile Iron Nominal: 30" 
• Cutter Wheel: RCI8-30
• Length: 96"
• Weight: 283 lbs

NOTE: Rotary™ Pipe Cutters must ship via truck freight.

Rotary style pipe cutters are a REED invention! REED Rotary™ pipe cutters cut pipe safely, easily, quickly, and at a low cost. Provides a square cut and can be used in close quarters anywhere – in the ditch, underwater, in noise-free zones, over head, in racks of pipes, etc. REED Rotary™ pipe cutters last for decades.

• Pipe snaps off squarely once the operator completes the cut.
• Spoked frame design allows for multiple handle attachment positions for operator to pull the cutter around the pipe.
• Excellent for cold cuts.
• Designed to cut large diameter pipe.
• Change the cutter wheels to use same cutter for different types of pipe

• Application: 
• Sch. 40 Stainless / Sch. 30 Steel 28"
• Sch. 80 Stainless / Sch. 30 Steel 30"
• Sch. 80 Stainless / Sch. 30 Steel 32"
• Sch. 40 Stainless / Sch. 30 Steel 34"
• (Includes pipe schedule listed plus all lower schedules of same pipe type.)
• Pipe Capacity Steel Nominal: 28" - 34" 
• Cutter Wheel: RCS8-36
• Length: 96"
• Weight: 283 lbs

NOTE: Rotary™ Pipe Cutters must ship via truck freight.

Rotary style pipe cutters are a REED invention! REED Rotary™ pipe cutters cut pipe safely, easily, quickly, and at a low cost. Provides a square cut and can be used in close quarters anywhere – in the ditch, underwater, in noise-free zones, over head, in racks of pipes, etc. REED Rotary™ pipe cutters last for decades.

• Larger blade exposure (.800” / 20.3 mm) of RCX cutter wheels allows cutter to penetrate the thick pipe walls of steel, heavy wall steel and stainless steel.
• One set (8) of RC8-30XR Rollers #93222 are installed on the cutter. These are required when using RCX cutter wheels.
• Pipe snaps off squarely once the operator completes the cut.
• Spoked frame design allows for multiple handle attachment positions for operator to pull the cutter around the pipe.
• Excellent for cold cuts.
• Designed to cut large diameter pipe.

• Application: 
• Sch. 40 Stainless / Sch. 30 Steel 28"
• Sch. 80 Stainless / Sch. 30 Steel 30"
• Sch. 80 Stainless / Sch. 40 Steel 32"
• Sch. 40 Stainless / Sch. 40 Steel 34"
• (Includes pipe schedule listed plus all lower schedules of same pipe type.)
• Pipe Capacity Steel Nominal: 28" - 34" 
• Cutter Wheel: RCX
• Length: 96"
• Weight: 283 lbs

NOTE: Rotary™ Pipe Cutters must ship via truck freight.

Rotary style pipe cutters are a REED invention! REED Rotary™ pipe cutters cut pipe safely, easily, quickly, and at a low cost. Provides a square cut and can be used in close quarters anywhere – in the ditch, underwater, in noise-free zones, over head, in racks of pipes, etc. REED Rotary™ pipe cutters last for decades.

• Pipe snaps off squarely once the operator completes the cut.
• Spoked frame design allows for multiple handle attachment positions for operator to pull the cutter around the pipe.
• Excellent for cold cuts.
• Designed to cut large diameter pipe.
• Change the cutter wheels to use same cutter for different types of pipe

• Application: 
• Sch. 80 Stainless / Sch. 30 Steel 32"
• Sch. 40 Stainless / Sch. 30 Steel 34"
• Sch. 80 Stainless / Sch. 30 Steel 36"
• (Includes pipe schedule listed plus all lower schedules of same pipe type.)
• Pipe Capacity Steel Nominal: 32" - 36" 
• Cutter Wheel: RCS8-36
• Length: 96"
• Weight: 295 lbs

NOTE: Rotary™ Pipe Cutters must ship via truck freight.