Everyone needs a handy cutter (or two) like Reed’s C Cutter. This easy-to-grip cutter easily snaps on to copper tubing for a quick, clean cut.

• Application: K, L & M copper and CTS CPVC
• Pipe Capacity: 1/2" nominal
• Just turn the cutter in the direction of the arrow and the cut will be complete in seconds.
• Compact c-shape means no handle swing space is required.
• The spring-loaded cutter wheel self-feeds on copper and CTS CPVC with consistent pressure as the tool is turned around the tubing.
• Each cutter fits just one popular size of copper tubing.

Everyone needs a handy cutter (or two) like Reed’s C Cutter. This easy-to-grip cutter easily snaps on to copper tubing for a quick, clean cut.

• Application: K, L & M copper and CTS CPVC
• Pipe Capacity: 3/4" nominal
• Just turn the cutter in the direction of the arrow and the cut will be complete in seconds.
• Compact c-shape means no handle swing space is required.
• The spring-loaded cutter wheel self-feeds on copper and CTS CPVC with consistent pressure as the tool is turned around the tubing.
• Each cutter fits just one popular size of copper tubing.

REED’s Toilet Closet Flange Reamer removes the internal closet flange and saves the sewer pipe for reuse. Clean out the old, damaged toilet flange, install a new one and complete the project in minutes. Engineered to fit a 4” internal flange, the toilet closet flange reamer saves time and material costs for the plumbing project. 

NOTE:  Closet Flanges with a lip or tabs above the 4" outlet require that the lip or tabs be removed before using the Toilet Flange Reamer. 

• Removes toilet flange from inside 4” PVC schedule 40 pipe.
• Eliminate the hassle and labor time of sawing and chiseling out the old closet flange.
• Fits into standard ½” drills.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.

The REED UPC is lightweight; cuts fast; requires only 12” clearance around the pipe; provides a square cut virtually every time; and can be operated underwater. It is by far the safest, easiest and fastest power cutter to setup, operate and maintain, which nets a low operating cost.

• Designed to cut 6" - 16" diameter ductile or cast iron, clay, concrete, steel, PVC or PE pipe.
• Pneumatic cutter can be adapted to a variety of uses, depending on blade selected.
• Ships with 3 gallon water tank.
• Heaviest cutter component, the main body, weighs just 28 pounds (13 kg). (Total weight 131 lbs.)

Must order REQUIRED blades SEPARATELY.  Use Reed's Blade Chart for guidance.

• Pipe Diameter: 6" - 16"
• Application: Cast Iron, Ductile Iron, Clay, Concrete, CPVC, PE, PVC Schedule 40, PVC C900 & C905, Steel Schedule 40

STANDARD EQUIPMENT

• Power Cutter with 1.7 H.P. Motor
• Chain / Turnbuckle Assembly cut up to 16"
• Filter / Regulator / Lubricator with Stand
• Water Tank: 3 gallon
• Carrying Case
• Air Motor Oil
• Grease Gun
• Hex Key Wrench Set
• Open End Wrenches
• Wedges

UNIVERSAL PIPE CUTTER POWER REQUIREMENTS

• Maximum RPM: 3675
• Air Consumption: 50 cu. ft. / min
• Pressure: 90 PSI Maximum
• Shut-Off: 3/4" Ball Valve
• Air Supply Fittings:  3/4" Dixon "Air King" Coupling

NOTE: Universal Pipe Cutters must ship via truck freight.

NOTE: When cutting steel pipe with the steel blades, sparks are possible and expected. Because of the sparks, the UPC cannot be used for cold cuts. 

The REED UPC is lightweight; cuts fast; requires only 12” clearance around the pipe; provides a square cut virtually every time; and can be operated underwater. It is by far the safest, easiest and fastest power cutter to setup, operate and maintain, which nets a low operating cost.

• Designed to cut full range of 6" - 36" diameter ductile or cast iron, clay, concrete, steel, PVC or PE pipe.
• Pneumatic cutter can be adapted to a variety of uses, depending on blade selected.
• Ships with 6 gallon water tank.
• Heaviest cutter component, the main body, weighs just 28 pounds (13 kg). (Total weight 131 lbs.)

Must order REQUIRED blades SEPARATELY.  Use Reed's Blade Chart for guidance.

• Pipe Diameter: 6" - 36"
• Application: Cast Iron, Ductile Iron, Clay, Concrete, CPVC, PE, PVC Schedule 40, PVC C900 & C905, Steel Schedule 40

STANDARD EQUIPMENT

• Power Cutter with 1.7 H.P. Motor
• Chain / Turnbuckle Assembly
• Connection Frames & Chain to cut up to 36"  
• Filter / Regulator / Lubricator with Stand
• Water Tank: 6 gallon with cart
• Carrying Case
• Air Motor Oil
• Grease Gun
• Hex Key Wrench Set
• Open End Wrenches
• Wedges

UNIVERSAL PIPE CUTTER POWER REQUIREMENTS

• Maximum RPM: 3675
• Air Consumption: 50 cu. ft. / min
• Pressure: 90 PSI Maximum
• Shut-Off: 3/4" Ball Valve
• Air Supply Fittings:  3/4" Dixon "Air King" Coupling

NOTE: Universal Pipe Cutters must ship via truck freight.

NOTE: When cutting steel pipe with the steel blades, sparks are possible and expected. Because of the sparks, the UPC cannot be used for cold cuts. 

The REED UPC is lightweight; cuts fast; requires only 12” clearance around the pipe; provides a square cut virtually every time; and can be operated underwater. It is by far the safest, easiest and fastest power cutter to setup, operate and maintain, which nets a low operating cost.

• Designed to cut widest range of 6" - 48" diameter ductile or cast iron, clay, concrete, steel, PVC or PE pipe.
• Pneumatic cutter can be adapted to a variety of uses, depending on blade selected.
• Ships with 6 gallon water tank.
• Heaviest cutter component, the main body, weighs just 28 pounds (13 kg). (Total weight 131 lbs.)

Must order REQUIRED blades SEPARATELY.  Use Reed's Blade Chart for guidance.

• Pipe Diameter: 6" - 48"
• Application: Cast Iron, Ductile Iron, Clay, Concrete, CPVC, PE, PVC Schedule 40, PVC C900 & C905, Steel Schedule 40

STANDARD EQUIPMENT

• Power Cutter with 1.7 H.P. Motor
• Chain / Turnbuckle Assembly
• Connection Frames & Chain to cut up to 48"  
• Filter / Regulator / Lubricator with Stand
• Water Tank: 6 gallon with cart
• Carrying Case
• Air Motor Oil
• Grease Gun
• Hex Key Wrench Set
• Open End Wrenches
• Wedges

UNIVERSAL PIPE CUTTER POWER REQUIREMENTS

• Maximum RPM: 3675
• Air Consumption: 50 cu. ft. / min
• Pressure: 90 PSI Maximum
• Shut-Off: 3/4" Ball Valve
• Air Supply Fittings:  3/4" Dixon "Air King" Coupling

NOTE: Universal Pipe Cutters must ship via truck freight.

NOTE: When cutting steel pipe with the steel blades, sparks are possible and expected. Because of the sparks, the UPC cannot be used for cold cuts. 

The REED UPC is lightweight; cuts fast; requires only 12” clearance around the pipe; provides a square cut virtually every time; and can be operated underwater. It is by far the safest, easiest and fastest power cutter to setup, operate and maintain, which nets a low operating cost.

• Specifically designed for cutting PE Pipe. 
• Lightweight, easy-to-use.
• Includes special blades and blade guard for cutting PE.
• Pneumatic-powered UPC836APE Universal Pipe Cutters for PE cuts 8” -36” nominal diameter (200-1000 mm actual O.D.) PE pipe.

Both UPC836APE and UPC848APE kits ship in a steel toolbox and include a UPC cutter, a filter-regulator-lubricator, #97520 and #97521 blades. The #97521 blade will cut large diameter PE pipe with a wall thickness up to 2.65” (67 mm). To cut 6” - 8” PE pipe, the #97519 blade must be ordered separately.

Use Reed's Blade Chart for guidance.

• Pipe Diameter: 8" - 36"
• Application: PE, HDPE

STANDARD EQUIPMENT

• Power Cutter with 1.7 H.P. Motor
• Chain / Turnbuckle Assembly
• Connection Frames & Chain to cut up to 36"  
• Filter / Regulator / Lubricator with Stand
• Carrying Case
• Air Motor Oil
• Grease Gun
• Hex Key Wrench Set
• Open End Wrenches
• Wedges
• UPCSTEEL6 6" Blade
• UPSPE8 8" Blade

UNIVERSAL PIPE CUTTER POWER REQUIREMENTS

• Maximum RPM: 3675
• Air Consumption: 50 cu. ft. / min
• Pressure: 90 PSI Maximum
• Shut-Off: 3/4" Ball Valve
• Air Supply Fittings:  3/4" Dixon "Air King" Coupling

NOTE: Universal Pipe Cutters must ship via truck freight.

NOTE: When cutting steel pipe with the steel blades, sparks are possible and expected. Because of the sparks, the UPC cannot be used for cold cuts. 

The REED UPC is lightweight; cuts fast; requires only 12” clearance around the pipe; provides a square cut virtually every time; and can be operated underwater. It is by far the safest, easiest and fastest power cutter to setup, operate and maintain, which nets a low operating cost.

• Specifically designed for cutting PE Pipe. 
• Lightweight, easy-to-use.
• Includes special blades and blade guard for cutting PE.
• Pneumatic-powered UPC836APE Universal Pipe Cutters for PE cuts 8” -48” nominal diameter (200-1000 mm actual O.D.) PE pipe.

Both UPC836APE and UPC848APE kits ship in a steel toolbox and include a UPC cutter, a filter-regulator-lubricator, #97520 and #97521 blades. The #97521 blade will cut large diameter PE pipe with a wall thickness up to 2.65” (67 mm). To cut 6” - 8” PE pipe, the #97519 blade must be ordered separately.

Use Reed's Blade Chart for guidance.

• Pipe Diameter: 8" - 48"
• Application: PE, HDPE

STANDARD EQUIPMENT

• Power Cutter with 1.7 H.P. Motor
• Chain / Turnbuckle Assembly
• Connection Frames & Chain to cut up to 36"  
• Filter / Regulator / Lubricator with Stand
• Carrying Case
• Air Motor Oil
• Grease Gun
• Hex Key Wrench Set
• Open End Wrenches
• Wedges
• UPCSTEEL6 6" Blade
• UPSPE8 8" Blade

UNIVERSAL PIPE CUTTER POWER REQUIREMENTS

• Maximum RPM: 3675
• Air Consumption: 50 cu. ft. / min
• Pressure: 90 PSI Maximum
• Shut-Off: 3/4" Ball Valve
• Air Supply Fittings:  3/4" Dixon "Air King" Coupling

NOTE: Universal Pipe Cutters must ship via truck freight.

NOTE: When cutting steel pipe with the steel blades, sparks are possible and expected. Because of the sparks, the UPC cannot be used for cold cuts.