Glue, Primer & Lubricants

PURCHASE FROM OUR STORE

IPS Pt. Pipe Joint Compound w/Teflon w/Brush (White Seal)

  • SKU: 87735
  • Brand: IPS
  • Product Description:

    Weld On White Seal Plus Pipe Thread Sealant is a multi-purpose heavy duty sealant with PTFE and zero VOC content for industrial applications and pipe lines.

    APPLICATION: White Seal Plus can be used for sealing and lubricating metal and plastic piping systems carrying: air and gases (compressed, manufactured or natural), ammonia, brine, acid (diluted), caustic alkalis (diluted), corrosives, freons, fuel (diesel, gasoline, jet fuel, and kerosene), oils, petroleum, propane, solvents, steam, sugar, and water. Not recommended for oxygen, fluorine or liquid sodium systems. Contains finely homogenized TeflonΠPTFE particles to fully pack voids and thread imperfection ensuring pressure-tight, leak-proof seal on pipe threads.

    • Contains finely homogenized PTFE particles for filling cracks and thread imperfections _ ensuring a leak-proof seal.
    • Non-setting formula allows easy disassembly of joints without damage to pipe, fittings or threads. Protects threaded areas from rust and corrosion and prevents galling.
    • For sealing and lubricating all metal and plastic (ABS, PVC, CPVC, Polypropylene, & Nylon) piping systems carrying various materials.1 Tested and approved for addition to the FBC System compatible program for use with FlowGuard GoldŒ, BlazeMasterŒ, and CorzanŒ CPVC plastic piping systems.
    • No VOC content.
    • Compliant with LEED ——Œ (Leadership in Energy and Environmental Design). When using this WELD-ON low VOC product, credit can be claimed for LEED Green Building Rating System _ Indoor Environmental Quality.
    • Listed by NSF International for compliance with ASTM D 2564, NSF/ANSI Standard 14, and NSF/ANSI Standard 61 for use on potable water, drain, waste, vent and sewer applications.
    • Listed by IAPMO for compliance with IAPMO PS 36-90 and applicable sections of the latest edition of the Uniform Plumbing CodeŒ International Plumbing CodeŒ.

    DIRECTIONS FOR USE:

    • Store between 20F and 140F (-6C and 60C). Sealant can be used as low as _50F (-45C).
    • Stir before use.
    • Ensure threads are clean (free of dirt, oil moisture, etc.) and made with good die.
    • Apply sealant freely to male threads only
    • Assemble joints. Do not over torque. System may be put in service immediately.

IPS Quart Plumbing Primer - Clear - NSF Listed

  • SKU: 14030
  • Brand: IPS
  • Product Description:

    Weld-OnΠPlumbing Primer is a low VOC emission, non-bodied, fast acting, primer. The strong action of Plumbing Primer rapidly softens and dissolves the joining surfaces of PVC and CPVC pipe and fittings. Available in clear and purple; check local code for color requirement.

    APPLICATION: Weld-On Plumbing Primer, when used in conjunction with appropriate Weld-Ons plumbing solvent cement line of products, will make consistently strong, well-fused joints. It is essential that the joining surfaces of pipe and fittings be softened and remains softened prior to assembly. The main function of the primer is to expedite the penetration and softening of the surfaces. Its rate of penetration into the joining surfaces is more rapid than that of solvent cement alone. Plumbing primer is suitable for use with all types, classes and schedules of PVC and CPVC pipe and fittings.

    • Essential for proper softening and preparation of PVC and CPVC pipe and fitting surfaces for plumbing applications
    • Quality low VOC formulation
    • Available in purple and clear
    • Meets ASTM F 656 Standard
    • Meets SCAQMD Rule 1168/316A
    • Compliant with LEEDŒ (Leadership in Energy and Environmental Design). When using this Weld-On low VOC product, credit can be claimed for LEED Green Building Rating System - Indoor Environmental Quality.
    • Listed by NSF International for compliance with ASTM F 656, NSF/ANSI Standard 14, and NSF/ANSI Standard 61 for use on potable water, drain, waste, vent and sewer applications.
    • Weld-On Plumbing Primer, purple color only, is listed by IAPMO for compliance with ASTM F 656 and applicable sections of the latest edition of the Uniform Plumbing CodeŒ.

IPS Quart Plumbing Primer - Purple - NSF Listed

  • SKU: 14025
  • Brand: IPS
  • Product Description:

    Weld-OnΠPlumbing Primer is a low VOC emission, non-bodied, fast acting, primer. The strong action of Plumbing Primer rapidly softens and dissolves the joining surfaces of PVC and CPVC pipe and fittings. Available in clear and purple; check local code for color requirement.

    APPLICATION: Weld-On Plumbing Primer, when used in conjunction with appropriate Weld-Ons plumbing solvent cement line of products, will make consistently strong, well-fused joints. It is essential that the joining surfaces of pipe and fittings be softened and remains softened prior to assembly. The main function of the primer is to expedite the penetration and softening of the surfaces. Its rate of penetration into the joining surfaces is more rapid than that of solvent cement alone. Plumbing primer is suitable for use with all types, classes and schedules of PVC and CPVC pipe and fittings.

    • Essential for proper softening and preparation of PVC and CPVC pipe and fitting surfaces for plumbing applications
    • Quality low VOC formulation
    • Available in purple and clear
    • Meets ASTM F 656 Standard
    • Meets SCAQMD Rule 1168/316A
    • Compliant with LEEDŒ (Leadership in Energy and Environmental Design). When using this Weld-On low VOC product, credit can be claimed for LEED Green Building Rating System - Indoor Environmental Quality.
    • Listed by NSF International for compliance with ASTM F 656, NSF/ANSI Standard 14, and NSF/ANSI Standard 61 for use on potable water, drain, waste, vent and sewer applications.
    • Weld-On Plumbing Primer, purple color only, is listed by IAPMO for compliance with ASTM F 656 and applicable sections of the latest edition of the Uniform Plumbing CodeŒ.

Pipe Lube - Gallon

  • SKU: 30601
  • Brand: Oatey
  • Product Description:

    Lubricant is a non-toxic, soft, paste-like material used for assembling pipelines, including cast iron, conrete, plastic and clay pipe.

    • Will not deteriorate natural or synthetic rubber
    • Will not support bacteria
    • Dissolves in hot water

Pipe Lube - Quart

  • SKU: 30600
  • Brand: Oatey
  • Product Description:

    Lubricant is a non-toxic, soft, paste-like material used for assembling pipelines, including cast iron, conrete, plastic and clay pipe.

    • Will not deteriorate natural or synthetic rubber
    • Will not support bacteria
    • Dissolves in hot water

Quart Dauber

  • SKU: 10006
  • Brand: IPS
  • Product Description:

    Quart daubers fit quart cans.

Round Cotton Swab Applicator

  • SKU: SWAB
  • Brand: JC Whitlam
  • Product Description:

    For applying large quantities of gasket lubricant or PVC cements and cleaners to pipe and fittings.

    • Wire-handle swab. Total length 11" (28 cm).