Provides a seal when installing pipe into risers, basins, etc.

• Ease of Installation
• Weather and Corrosion Resistant
• No Bolts or Gaskets Required
• Requires No Sealants
• Durable PVC Composition
• Material: PVC 70 Durometer
• Available in 3/8" through 6" sizes

 INSTALLATION INSTRUCTIONS

1. Select proper hole saw from information below and cut hole at desired location in part. 
2. Insert Adapt-A-Flex into the hole, making sure that it is flush against part. 
3. Slightly bevel one end of inlet pipe, making it easier to push through Adapt-A-Flex. 
4. Apply soapy water to Adapt-A-Flex at inlet pipe insertion point
5. Apply soapy water on beveled end of inlet pipe.
6. Push inlet pipe through Adapt-A-Flex

Sizing info for 1 1/2" #AKP10050 AAF-150-H250

Hole Saw Size:  2 1/2"   

    A = 1.898

    B = .503

    C = 1.589

    D = 2.566

Provides a seal when installing pipe into risers, basins, etc.

• Ease of Installation
• Weather and Corrosion Resistant
• No Bolts or Gaskets Required
• Requires No Sealants
• Durable PVC Composition
• Material: PVC 70 Durometer
• Available in 3/8" through 6" sizes

 INSTALLATION INSTRUCTIONS

1. Select proper hole saw from information below and cut hole at desired location in part. 
2. Insert Adapt-A-Flex into the hole, making sure that it is flush against part. 
3. Slightly bevel one end of inlet pipe, making it easier to push through Adapt-A-Flex. 
4. Apply soapy water to Adapt-A-Flex at inlet pipe insertion point
5. Apply soapy water on beveled end of inlet pipe.
6. Push inlet pipe through Adapt-A-Flex

Sizing info for 1 1/4" #AKP10035 AAF-125-H250

Hole Saw Size:  2"   

    A = 1.637

    B = .506

    C = 1.385

    D = 2.078

Provides a seal when installing pipe into risers, basins, etc.

• Ease of Installation
• Weather and Corrosion Resistant
• No Bolts or Gaskets Required
• Requires No Sealants
• Durable PVC Composition
• Material: PVC 70 Durometer
• Available in 3/8" through 6" sizes

 INSTALLATION INSTRUCTIONS

1. Select proper hole saw from information below and cut hole at desired location in part. 
2. Insert Adapt-A-Flex into the hole, making sure that it is flush against part. 
3. Slightly bevel one end of inlet pipe, making it easier to push through Adapt-A-Flex. 
4. Apply soapy water to Adapt-A-Flex at inlet pipe insertion point
5. Apply soapy water on beveled end of inlet pipe.
6. Push inlet pipe through Adapt-A-Flex

Sizing info for 1" #AKP10030 AAF-100

Hole Saw Size:  1 3/4"   

    A = 1.300

    B = .22

    C = 1.05

    D = 1.78

Provides a seal when installing pipe into risers, basins, etc.

• Ease of Installation
• Weather and Corrosion Resistant
• No Bolts or Gaskets Required
• Requires No Sealants
• Durable PVC Composition
• Material: PVC 70 Durometer
• Available in 3/8" through 6" sizes

 INSTALLATION INSTRUCTIONS

1. Select proper hole saw from information below and cut hole at desired location in part. 
2. Insert Adapt-A-Flex into the hole, making sure that it is flush against part. 
3. Slightly bevel one end of inlet pipe, making it easier to push through Adapt-A-Flex. 
4. Apply soapy water to Adapt-A-Flex at inlet pipe insertion point
5. Apply soapy water on beveled end of inlet pipe.
6. Push inlet pipe through Adapt-A-Flex

Sizing info for 1/2" #AKP10010  AAF-050

Hole Saw Size:  1 1/4"   

    A = .853

    B = .488

    C = .662

    D = 1.325

Provides a seal when installing pipe into risers, basins, etc.

• Ease of Installation
• Weather and Corrosion Resistant
• No Bolts or Gaskets Required
• Requires No Sealants
• Durable PVC Composition
• Material: PVC 70 Durometer
• Available in 3/8" through 6" sizes

 INSTALLATION INSTRUCTIONS

1. Select proper hole saw from information below and cut hole at desired location in part. 
2. Insert Adapt-A-Flex into the hole, making sure that it is flush against part. 
3. Slightly bevel one end of inlet pipe, making it easier to push through Adapt-A-Flex. 
4. Apply soapy water to Adapt-A-Flex at inlet pipe insertion point
5. Apply soapy water on beveled end of inlet pipe.
6. Push inlet pipe through Adapt-A-Flex

Sizing info for 2" #AKP10070  AAF-200

Hole Saw Size:  3"   

    A = 2.303

    B = .513

    C = 2.04

    D = 2.98

Provides a seal when installing pipe into risers, basins, etc.

• Ease of Installation
• Weather and Corrosion Resistant
• No Bolts or Gaskets Required
• Requires No Sealants
• Durable PVC Composition
• Material: PVC 70 Durometer
• Available in 3/8" through 6" sizes

 INSTALLATION INSTRUCTIONS

1. Select proper hole saw from information below and cut hole at desired location in part. 
2. Insert Adapt-A-Flex into the hole, making sure that it is flush against part. 
3. Slightly bevel one end of inlet pipe, making it easier to push through Adapt-A-Flex. 
4. Apply soapy water to Adapt-A-Flex at inlet pipe insertion point
5. Apply soapy water on beveled end of inlet pipe.
6. Push inlet pipe through Adapt-A-Flex

Sizing info for 3" #AKP10080 AAF-300

Hole Saw Size:  3 7/8"   

    A = 3.491

    B = .512

    C = 3.195

    D = 4.065

Provides a seal when installing pipe into risers, basins, etc.

• Ease of Installation
• Weather and Corrosion Resistant
• No Bolts or Gaskets Required
• Requires No Sealants
• Durable PVC Composition
• Material: PVC 70 Durometer
• Available in 3/8" through 6" sizes

 INSTALLATION INSTRUCTIONS

1. Select proper hole saw from information below and cut hole at desired location in part. 
2. Insert Adapt-A-Flex into the hole, making sure that it is flush against part. 
3. Slightly bevel one end of inlet pipe, making it easier to push through Adapt-A-Flex. 
4. Apply soapy water to Adapt-A-Flex at inlet pipe insertion point
5. Apply soapy water on beveled end of inlet pipe.
6. Push inlet pipe through Adapt-A-Flex

Sizing info for 3/4" #AKP10020 AAF-075

Hole Saw Size:  1 1/4"   

    A = 1.044

    B = .495

    C = .847

    D = 1.324

Provides a seal when installing pipe into risers, basins, etc.

• Ease of Installation
• Weather and Corrosion Resistant
• No Bolts or Gaskets Required
• Requires No Sealants
• Durable PVC Composition
• Material: PVC 70 Durometer
• Available in 3/8" through 6" sizes

 INSTALLATION INSTRUCTIONS

1. Select proper hole saw from information below and cut hole at desired location in part. 
2. Insert Adapt-A-Flex into the hole, making sure that it is flush against part. 
3. Slightly bevel one end of inlet pipe, making it easier to push through Adapt-A-Flex. 
4. Apply soapy water to Adapt-A-Flex at inlet pipe insertion point
5. Apply soapy water on beveled end of inlet pipe.
6. Push inlet pipe through Adapt-A-Flex

Sizing info for 4" #AKP10110  AAF-400-S40

Hole Saw Size:  4 7/8"   

    A = 4.435

    B = .515

    C = 4.192

    D = 5.035

Provides a seal when installing pipe into risers, basins, etc.

• Ease of Installation
• Weather and Corrosion Resistant
• No Bolts or Gaskets Required
• Requires No Sealants
• Durable PVC Composition
• Material: PVC 70 Durometer
• Available in 3/8" through 6" sizes

 INSTALLATION INSTRUCTIONS

1. Select proper hole saw from information below and cut hole at desired location in part. 
2. Insert Adapt-A-Flex into the hole, making sure that it is flush against part. 
3. Slightly bevel one end of inlet pipe, making it easier to push through Adapt-A-Flex. 
4. Apply soapy water to Adapt-A-Flex at inlet pipe insertion point
5. Apply soapy water on beveled end of inlet pipe.
6. Push inlet pipe through Adapt-A-Flex

Sizing info for 4" #AKP10100  AAF-400-S35

Hole Saw Size:  4 7/8"   

    A = 4.292

    B = .508

    C = 3.837

    D = 4.979

Provides a seal when installing pipe into risers, basins, etc.

• Accepts 4" SDR35 Pipe or spigot end of fitting (4.25" OD)

Provides a seal when installing pipe into risers, basins, etc.

Provides a seal when installing pipe into risers, basins, etc.

• Ease of Installation
• Weather and Corrosion Resistant
• No Bolts or Gaskets Required
• Requires No Sealants
• Durable PVC Composition
• Material: PVC 70 Durometer
• Available in 3/8" through 6" sizes

 INSTALLATION INSTRUCTIONS

1. Select proper hole saw from information below and cut hole at desired location in part. 
2. Insert Adapt-A-Flex into the hole, making sure that it is flush against part. 
3. Slightly bevel one end of inlet pipe, making it easier to push through Adapt-A-Flex. 
4. Apply soapy water to Adapt-A-Flex at inlet pipe insertion point
5. Apply soapy water on beveled end of inlet pipe.
6. Push inlet pipe through Adapt-A-Flex

Sizing info for 6" #AKP10130  AAF-600-S40

Hole Saw Size:  7"   

    A = 6.688

    B = .514

    C = 6.075

    D = 7.013