Provides a seal when installing pipe into risers, basins, etc.

• Ease of Installation
• Weather and Corrosion Resistant
• No Bolts or Gaskets Required
• Requires No Sealants
• Durable PVC Composition
• Material: PVC 70 Durometer
• Available in 3/8" through 6" sizes

 INSTALLATION INSTRUCTIONS

1. Select proper hole saw from information below and cut hole at desired location in part. 
2. Insert Adapt-A-Flex into the hole, making sure that it is flush against part. 
3. Slightly bevel one end of inlet pipe, making it easier to push through Adapt-A-Flex. 
4. Apply soapy water to Adapt-A-Flex at inlet pipe insertion point
5. Apply soapy water on beveled end of inlet pipe.
6. Push inlet pipe through Adapt-A-Flex

Sizing info for 6" #AKP10120

Hole Saw Size:  7"   

    A = 6.275

    B = .512

    C = 5.50

    D = 7.063

Provides a seal when installing pipe into risers, basins, etc.

AK Industries 30 Inch Diameter Fiberglass Cover

• (6) 9/16" holes on a 32 1/2" Bolt Circle

AK Industries 30 Inch Diameter Fiberglass Basins

• Accepts Adaptaflex and Cast Iron Hubs
• Flat Flange
• (6) Equally Spaced 3/8" SS Weld Nuts Embedded on a 32 1/2" B.C.

AK Industries Fiberglass Products

• Fiberglass Basins & Accessories
• Fiberglass Basin Extensions
• Basin Covers & Accessories
• Prefabricated Lift-Out Station Basins & Accessories
• Fiberglass Triple Garage Basins
• H20 Covers

AK Industries Poly Products

• Sump Pit & Sewage Basins
• Water Boxes & Sink Trays
• Triple Garage Basins
• Pump Jon
• Sump & Sewage Basin Covers & Accessories
• Septic & Pump Tanks

The Jackel Sewage Basin is designed to hold a sewage pump. It is ideal for basement applications where a submersible sewage pump is required. The single piece basin is injection molded polyethylene structural foam and provides superior structural toughness and reliability. The rim of the basin includes pre-drilled holes with metal inserts to accept the mounting and securing of a cover.

• Available in 30, 45, 72 & 110 gallon capacity

The Jackel Sump Basin is designed to hold a sump pump. It is ideal for basement applications where a submersible or pedestal sump pump is required. The single piece basin is injection molded olyethylene structural foam and provides superior structural toughness and reliability. The rim of the basin includes pre-drilled holes with metal inserts to accept the mounting and securing of a cover.

• Available in 6, 15, 22, 22 1/2 & 45 gallon capacity