Inlet Water Level Control Structuresare designed to control the depth and volume of water within a wetland or pond by removing surface water.
Features
Constructed of rugged 1/2" PVC
Stainless steel screws and custom anodized aluminum corner extrusions used for strength and durability
Flexible couplers allow PVC, plastic pipe, or other materials to be easily attached. (Please specify type of pipe when ordering.)
Stoplogs made of PVC in 5" and 7" heights for adjustability. (Maintenance recommended: Remove stoplogs and grease seal with Lubriplate Grease. Ensure there is no debris in the tracks or along the bottom of the structure. Replace stoplogs after greasing.)
Important! To minimize seepage, align stoplogs firmly against one side of the stoplog track
Stoplogs must remain in track during structure installation
Structure must be anchored down when installed or it may have the tendency to float
Structures are not pressure rated
Structures are intended for gravity flow: Low pressure and some seepage may occur
5-year warranty on all standard structures
5-year warranty on all standard structures
Customized or special orders will carry a 1-year warranty on workmanship and material and are nonreturnable
Inside Diameter Width: 14"
Inside Diameter Depth: 8"
Inlet Water Control Structure 10" Pipe x 3' Tall
SKU: WCINLET1003
Brand: Agri Drain
Product Description:
Inlet Water Level Control Structuresare designed to control the depth and volume of water within a wetland or pond by removing surface water.
Features
Constructed of rugged 1/2" PVC
Stainless steel screws and custom anodized aluminum corner extrusions used for strength and durability
Flexible couplers allow PVC, plastic pipe, or other materials to be easily attached. (Please specify type of pipe when ordering.)
Stoplogs made of PVC in 5" and 7" heights for adjustability. (Maintenance recommended: Remove stoplogs and grease seal with Lubriplate Grease. Ensure there is no debris in the tracks or along the bottom of the structure. Replace stoplogs after greasing.)
Important! To minimize seepage, align stoplogs firmly against one side of the stoplog track
Stoplogs must remain in track during structure installation
Structure must be anchored down when installed or it may have the tendency to float
Structures are not pressure rated
Structures are intended for gravity flow: Low pressure and some seepage may occur
5-year warranty on all standard structures
5-year warranty on all standard structures
Customized or special orders will carry a 1-year warranty on workmanship and material and are nonreturnable
Inside Diameter Width: 14"
Inside Diameter Depth: 8"
Inlet Water Control Structure 10" Pipe x 4' Tall
SKU: WCINLET1004
Brand: Agri Drain
Product Description:
Inlet Water Level Control Structuresare designed to control the depth and volume of water within a wetland or pond by removing surface water.
Features
Constructed of rugged 1/2" PVC
Stainless steel screws and custom anodized aluminum corner extrusions used for strength and durability
Flexible couplers allow PVC, plastic pipe, or other materials to be easily attached. (Please specify type of pipe when ordering.)
Stoplogs made of PVC in 5" and 7" heights for adjustability. (Maintenance recommended: Remove stoplogs and grease seal with Lubriplate Grease. Ensure there is no debris in the tracks or along the bottom of the structure. Replace stoplogs after greasing.)
Important! To minimize seepage, align stoplogs firmly against one side of the stoplog track
Stoplogs must remain in track during structure installation
Structure must be anchored down when installed or it may have the tendency to float
Structures are not pressure rated
Structures are intended for gravity flow: Low pressure and some seepage may occur
5-year warranty on all standard structures
5-year warranty on all standard structures
Customized or special orders will carry a 1-year warranty on workmanship and material and are nonreturnable
Inside Diameter Width: 14"
Inside Diameter Depth: 8"
Inlet Water Control Structure 10" Pipe x 5' Tall
SKU: WCINLET1005
Brand: Agri Drain
Product Description:
Inlet Water Level Control Structuresare designed to control the depth and volume of water within a wetland or pond by removing surface water.
Features
Constructed of rugged 1/2" PVC
Stainless steel screws and custom anodized aluminum corner extrusions used for strength and durability
Flexible couplers allow PVC, plastic pipe, or other materials to be easily attached. (Please specify type of pipe when ordering.)
Stoplogs made of PVC in 5" and 7" heights for adjustability. (Maintenance recommended: Remove stoplogs and grease seal with Lubriplate Grease. Ensure there is no debris in the tracks or along the bottom of the structure. Replace stoplogs after greasing.)
Important! To minimize seepage, align stoplogs firmly against one side of the stoplog track
Stoplogs must remain in track during structure installation
Structure must be anchored down when installed or it may have the tendency to float
Structures are not pressure rated
Structures are intended for gravity flow: Low pressure and some seepage may occur
5-year warranty on all standard structures
5-year warranty on all standard structures
Customized or special orders will carry a 1-year warranty on workmanship and material and are nonreturnable
Inside Diameter Width: 14"
Inside Diameter Depth: 8"
Inlet Water Control Structure 10" Pipe x 6' Tall
SKU: WCINLET1006
Brand: Agri Drain
Product Description:
Inlet Water Level Control Structuresare designed to control the depth and volume of water within a wetland or pond by removing surface water.
Features
Constructed of rugged 1/2" PVC
Stainless steel screws and custom anodized aluminum corner extrusions used for strength and durability
Flexible couplers allow PVC, plastic pipe, or other materials to be easily attached. (Please specify type of pipe when ordering.)
Stoplogs made of PVC in 5" and 7" heights for adjustability. (Maintenance recommended: Remove stoplogs and grease seal with Lubriplate Grease. Ensure there is no debris in the tracks or along the bottom of the structure. Replace stoplogs after greasing.)
Important! To minimize seepage, align stoplogs firmly against one side of the stoplog track
Stoplogs must remain in track during structure installation
Structure must be anchored down when installed or it may have the tendency to float
Structures are not pressure rated
Structures are intended for gravity flow: Low pressure and some seepage may occur
5-year warranty on all standard structures
5-year warranty on all standard structures
Customized or special orders will carry a 1-year warranty on workmanship and material and are nonreturnable
Inside Diameter Width: 14"
Inside Diameter Depth: 8"
Inlet Water Control Structure 12" Pipe x 2' Tall
SKU: WCINLET1202
Brand: Agri Drain
Product Description:
Inlet Water Level Control Structuresare designed to control the depth and volume of water within a wetland or pond by removing surface water.
Features
Constructed of rugged 1/2" PVC
Stainless steel screws and custom anodized aluminum corner extrusions used for strength and durability
Flexible couplers allow PVC, plastic pipe, or other materials to be easily attached. (Please specify type of pipe when ordering.)
Stoplogs made of PVC in 5" and 7" heights for adjustability. (Maintenance recommended: Remove stoplogs and grease seal with Lubriplate Grease. Ensure there is no debris in the tracks or along the bottom of the structure. Replace stoplogs after greasing.)
Important! To minimize seepage, align stoplogs firmly against one side of the stoplog track
Stoplogs must remain in track during structure installation
Structure must be anchored down when installed or it may have the tendency to float
Structures are not pressure rated
Structures are intended for gravity flow: Low pressure and some seepage may occur
5-year warranty on all standard structures
5-year warranty on all standard structures
Customized or special orders will carry a 1-year warranty on workmanship and material and are nonreturnable
Inside Diameter Width: 16"
Inside Diameter Depth: 10"
Inlet Water Control Structure 12" Pipe x 3' Tall
SKU: WCINLET1203
Brand: Agri Drain
Product Description:
Inlet Water Level Control Structuresare designed to control the depth and volume of water within a wetland or pond by removing surface water.
Features
Constructed of rugged 1/2" PVC
Stainless steel screws and custom anodized aluminum corner extrusions used for strength and durability
Flexible couplers allow PVC, plastic pipe, or other materials to be easily attached. (Please specify type of pipe when ordering.)
Stoplogs made of PVC in 5" and 7" heights for adjustability. (Maintenance recommended: Remove stoplogs and grease seal with Lubriplate Grease. Ensure there is no debris in the tracks or along the bottom of the structure. Replace stoplogs after greasing.)
Important! To minimize seepage, align stoplogs firmly against one side of the stoplog track
Stoplogs must remain in track during structure installation
Structure must be anchored down when installed or it may have the tendency to float
Structures are not pressure rated
Structures are intended for gravity flow: Low pressure and some seepage may occur
5-year warranty on all standard structures
5-year warranty on all standard structures
Customized or special orders will carry a 1-year warranty on workmanship and material and are nonreturnable
Inside Diameter Width: 16"
Inside Diameter Depth: 10"
Inlet Water Control Structure 12" Pipe x 4' Tall
SKU: WCINLET1204
Brand: Agri Drain
Product Description:
Inlet Water Level Control Structuresare designed to control the depth and volume of water within a wetland or pond by removing surface water.
Features
Constructed of rugged 1/2" PVC
Stainless steel screws and custom anodized aluminum corner extrusions used for strength and durability
Flexible couplers allow PVC, plastic pipe, or other materials to be easily attached. (Please specify type of pipe when ordering.)
Stoplogs made of PVC in 5" and 7" heights for adjustability. (Maintenance recommended: Remove stoplogs and grease seal with Lubriplate Grease. Ensure there is no debris in the tracks or along the bottom of the structure. Replace stoplogs after greasing.)
Important! To minimize seepage, align stoplogs firmly against one side of the stoplog track
Stoplogs must remain in track during structure installation
Structure must be anchored down when installed or it may have the tendency to float
Structures are not pressure rated
Structures are intended for gravity flow: Low pressure and some seepage may occur
5-year warranty on all standard structures
5-year warranty on all standard structures
Customized or special orders will carry a 1-year warranty on workmanship and material and are nonreturnable
Inside Diameter Width: 16"
Inside Diameter Depth: 10"
Inlet Water Control Structure 12" Pipe x 5' Tall
SKU: WCINLET1205
Brand: Agri Drain
Product Description:
Inlet Water Level Control Structuresare designed to control the depth and volume of water within a wetland or pond by removing surface water.
Features
Constructed of rugged 1/2" PVC
Stainless steel screws and custom anodized aluminum corner extrusions used for strength and durability
Flexible couplers allow PVC, plastic pipe, or other materials to be easily attached. (Please specify type of pipe when ordering.)
Stoplogs made of PVC in 5" and 7" heights for adjustability. (Maintenance recommended: Remove stoplogs and grease seal with Lubriplate Grease. Ensure there is no debris in the tracks or along the bottom of the structure. Replace stoplogs after greasing.)
Important! To minimize seepage, align stoplogs firmly against one side of the stoplog track
Stoplogs must remain in track during structure installation
Structure must be anchored down when installed or it may have the tendency to float
Structures are not pressure rated
Structures are intended for gravity flow: Low pressure and some seepage may occur
5-year warranty on all standard structures
5-year warranty on all standard structures
Customized or special orders will carry a 1-year warranty on workmanship and material and are nonreturnable
Inside Diameter Width: 16"
Inside Diameter Depth: 10"
Inlet Water Control Structure 12" Pipe x 6' Tall
SKU: WCINLET1206
Brand: Agri Drain
Product Description:
Inlet Water Level Control Structuresare designed to control the depth and volume of water within a wetland or pond by removing surface water.
Features
Constructed of rugged 1/2" PVC
Stainless steel screws and custom anodized aluminum corner extrusions used for strength and durability
Flexible couplers allow PVC, plastic pipe, or other materials to be easily attached. (Please specify type of pipe when ordering.)
Stoplogs made of PVC in 5" and 7" heights for adjustability. (Maintenance recommended: Remove stoplogs and grease seal with Lubriplate Grease. Ensure there is no debris in the tracks or along the bottom of the structure. Replace stoplogs after greasing.)
Important! To minimize seepage, align stoplogs firmly against one side of the stoplog track
Stoplogs must remain in track during structure installation
Structure must be anchored down when installed or it may have the tendency to float
Structures are not pressure rated
Structures are intended for gravity flow: Low pressure and some seepage may occur
5-year warranty on all standard structures
5-year warranty on all standard structures
Customized or special orders will carry a 1-year warranty on workmanship and material and are nonreturnable
Inside Diameter Width: 16"
Inside Diameter Depth: 10"
Inlet Water Control Structure 15" Pipe x 2' Tall
SKU: WCINLET1502
Brand: Agri Drain
Product Description:
Inlet Water Level Control Structuresare designed to control the depth and volume of water within a wetland or pond by removing surface water.
Features
Constructed of rugged 1/2" PVC
Stainless steel screws and custom anodized aluminum corner extrusions used for strength and durability
Flexible couplers allow PVC, plastic pipe, or other materials to be easily attached. (Please specify type of pipe when ordering.)
Stoplogs made of PVC in 5" and 7" heights for adjustability. (Maintenance recommended: Remove stoplogs and grease seal with Lubriplate Grease. Ensure there is no debris in the tracks or along the bottom of the structure. Replace stoplogs after greasing.)
Important! To minimize seepage, align stoplogs firmly against one side of the stoplog track
Stoplogs must remain in track during structure installation
Structure must be anchored down when installed or it may have the tendency to float
Structures are not pressure rated
Structures are intended for gravity flow: Low pressure and some seepage may occur
5-year warranty on all standard structures
5-year warranty on all standard structures
Customized or special orders will carry a 1-year warranty on workmanship and material and are nonreturnable
Inside Diameter Width: 20"
Inside Diameter Depth: 12"
Inlet Water Control Structure 15" Pipe x 3' Tall
SKU: WCINLET1503
Brand: Agri Drain
Product Description:
Inlet Water Level Control Structuresare designed to control the depth and volume of water within a wetland or pond by removing surface water.
Features
Constructed of rugged 1/2" PVC
Stainless steel screws and custom anodized aluminum corner extrusions used for strength and durability
Flexible couplers allow PVC, plastic pipe, or other materials to be easily attached. (Please specify type of pipe when ordering.)
Stoplogs made of PVC in 5" and 7" heights for adjustability. (Maintenance recommended: Remove stoplogs and grease seal with Lubriplate Grease. Ensure there is no debris in the tracks or along the bottom of the structure. Replace stoplogs after greasing.)
Important! To minimize seepage, align stoplogs firmly against one side of the stoplog track
Stoplogs must remain in track during structure installation
Structure must be anchored down when installed or it may have the tendency to float
Structures are not pressure rated
Structures are intended for gravity flow: Low pressure and some seepage may occur
5-year warranty on all standard structures
5-year warranty on all standard structures
Customized or special orders will carry a 1-year warranty on workmanship and material and are nonreturnable