Inlet Water Level Control Structures are designed to control the depth and volume of water within a wetland or pond by removing surface water.

Features

• Constructed of rugged 1/2" PVC
• Stainless steel screws and custom anodized aluminum corner extrusions used for strength and durability
• Flexible couplers allow PVC, plastic pipe, or other materials to be easily attached. (Please specify type of pipe when ordering.)
• Stoplogs made of PVC in 5" and 7" heights for adjustability. (Maintenance recommended: Remove stoplogs and grease seal with Lubriplate Grease. Ensure there is no debris in the tracks or along the bottom of the structure. Replace stoplogs after greasing.)
• Important! To minimize seepage, align stoplogs firmly against one side of the stoplog track
• Stoplogs must remain in track during structure installation
• Structure must be anchored down when installed or it may have the tendency to float
• Structures are not pressure rated
• Structures are intended for gravity flow: Low pressure and some seepage may occur
• 5-year warranty on all standard structures
• 5-year warranty on all standard structures
• Customized or special orders will carry a 1-year warranty on workmanship and material and are nonreturnable
• Inside Diameter Width: 20"
• Inside Diameter Depth: 12"

Inlet Water Level Control Structuresare designed to control the depth and volume of water within a wetland or pond by removing surface water.

Features

• Constructed of rugged 1/2" PVC
• Stainless steel screws and custom anodized aluminum corner extrusions used for strength and durability
• Flexible couplers allow PVC, plastic pipe, or other materials to be easily attached. (Please specify type of pipe when ordering.)
• Stoplogs made of PVC in 5" and 7" heights for adjustability. (Maintenance recommended: Remove stoplogs and grease seal with Lubriplate Grease. Ensure there is no debris in the tracks or along the bottom of the structure. Replace stoplogs after greasing.)
• Important! To minimize seepage, align stoplogs firmly against one side of the stoplog track
• Stoplogs must remain in track during structure installation
• Structure must be anchored down when installed or it may have the tendency to float
• Structures are not pressure rated
• Structures are intended for gravity flow: Low pressure and some seepage may occur
• 5-year warranty on all standard structures
• 5-year warranty on all standard structures
• Customized or special orders will carry a 1-year warranty on workmanship and material and are nonreturnable
• Inside Diameter Width: 20"
• Inside Diameter Depth: 12"

Inlet Water Level Control Structures are designed to control the depth and volume of water within a wetland or pond by removing surface water.

Features

• Constructed of rugged 1/2" PVC
• Stainless steel screws and custom anodized aluminum corner extrusions used for strength and durability
• Flexible couplers allow PVC, plastic pipe, or other materials to be easily attached. (Please specify type of pipe when ordering.)
• Stoplogs made of PVC in 5" and 7" heights for adjustability. (Maintenance recommended: Remove stoplogs and grease seal with Lubriplate Grease. Ensure there is no debris in the tracks or along the bottom of the structure. Replace stoplogs after greasing.)
• Important! To minimize seepage, align stoplogs firmly against one side of the stoplog track
• Stoplogs must remain in track during structure installation
• Structure must be anchored down when installed or it may have the tendency to float
• Structures are not pressure rated
• Structures are intended for gravity flow: Low pressure and some seepage may occur
• 5-year warranty on all standard structures
• 5-year warranty on all standard structures
• Customized or special orders will carry a 1-year warranty on workmanship and material and are nonreturnable
• Inside Diameter Width: 20"
• Inside Diameter Depth: 12"

Inlet Water Level Control Structures are designed to control the depth and volume of water within a wetland or pond by removing surface water.

Features

• Constructed of rugged 1/2" PVC
• Stainless steel screws and custom anodized aluminum corner extrusions used for strength and durability
• Flexible couplers allow PVC, plastic pipe, or other materials to be easily attached. (Please specify type of pipe when ordering.)
• Stoplogs made of PVC in 5" and 7" heights for adjustability. (Maintenance recommended: Remove stoplogs and grease seal with Lubriplate Grease. Ensure there is no debris in the tracks or along the bottom of the structure. Replace stoplogs after greasing.)
• Important! To minimize seepage, align stoplogs firmly against one side of the stoplog track
• Stoplogs must remain in track during structure installation
• Structure must be anchored down when installed or it may have the tendency to float
• Structures are not pressure rated
• Structures are intended for gravity flow: Low pressure and some seepage may occur
• 5-year warranty on all standard structures
• 5-year warranty on all standard structures
• Customized or special orders will carry a 1-year warranty on workmanship and material and are nonreturnable
• Inside Diameter Width: 24"
• Inside Diameter Depth: 14"

Inlet Water Level Control Structures are designed to control the depth and volume of water within a wetland or pond by removing surface water.

Features

• Constructed of rugged 1/2" PVC
• Stainless steel screws and custom anodized aluminum corner extrusions used for strength and durability
• Flexible couplers allow PVC, plastic pipe, or other materials to be easily attached. (Please specify type of pipe when ordering.)
• Stoplogs made of PVC in 5" and 7" heights for adjustability. (Maintenance recommended: Remove stoplogs and grease seal with Lubriplate Grease. Ensure there is no debris in the tracks or along the bottom of the structure. Replace stoplogs after greasing.)
• Important! To minimize seepage, align stoplogs firmly against one side of the stoplog track
• Stoplogs must remain in track during structure installation
• Structure must be anchored down when installed or it may have the tendency to float
• Structures are not pressure rated
• Structures are intended for gravity flow: Low pressure and some seepage may occur
• 5-year warranty on all standard structures
• 5-year warranty on all standard structures
• Customized or special orders will carry a 1-year warranty on workmanship and material and are nonreturnable
• Inside Diameter Width: 24"
• Inside Diameter Depth: 14"

Inlet Water Level Control Structures are designed to control the depth and volume of water within a wetland or pond by removing surface water.

Features

• Constructed of rugged 1/2" PVC
• Stainless steel screws and custom anodized aluminum corner extrusions used for strength and durability
• Flexible couplers allow PVC, plastic pipe, or other materials to be easily attached. (Please specify type of pipe when ordering.)
• Stoplogs made of PVC in 5" and 7" heights for adjustability. (Maintenance recommended: Remove stoplogs and grease seal with Lubriplate Grease. Ensure there is no debris in the tracks or along the bottom of the structure. Replace stoplogs after greasing.)
• Important! To minimize seepage, align stoplogs firmly against one side of the stoplog track
• Stoplogs must remain in track during structure installation
• Structure must be anchored down when installed or it may have the tendency to float
• Structures are not pressure rated
• Structures are intended for gravity flow: Low pressure and some seepage may occur
• 5-year warranty on all standard structures
• 5-year warranty on all standard structures
• Customized or special orders will carry a 1-year warranty on workmanship and material and are nonreturnable
• Inside Diameter Width: 24"
• Inside Diameter Depth: 14"

Inlet Water Level Control Structuresare designed to control the depth and volume of water within a wetland or pond by removing surface water.

Features

• Constructed of rugged 1/2" PVC
• Stainless steel screws and custom anodized aluminum corner extrusions used for strength and durability
• Flexible couplers allow PVC, plastic pipe, or other materials to be easily attached. (Please specify type of pipe when ordering.)
• Stoplogs made of PVC in 5" and 7" heights for adjustability. (Maintenance recommended: Remove stoplogs and grease seal with Lubriplate Grease. Ensure there is no debris in the tracks or along the bottom of the structure. Replace stoplogs after greasing.)
• Important! To minimize seepage, align stoplogs firmly against one side of the stoplog track
• Stoplogs must remain in track during structure installation
• Structure must be anchored down when installed or it may have the tendency to float
• Structures are not pressure rated
• Structures are intended for gravity flow: Low pressure and some seepage may occur
• 5-year warranty on all standard structures
• 5-year warranty on all standard structures
• Customized or special orders will carry a 1-year warranty on workmanship and material and are nonreturnable
• Inside Diameter Width: 24"
• Inside Diameter Depth: 14"

Inlet Water Level Control Structuresare designed to control the depth and volume of water within a wetland or pond by removing surface water.

Features

• Constructed of rugged 1/2" PVC
• Stainless steel screws and custom anodized aluminum corner extrusions used for strength and durability
• Flexible couplers allow PVC, plastic pipe, or other materials to be easily attached. (Please specify type of pipe when ordering.)
• Stoplogs made of PVC in 5" and 7" heights for adjustability. (Maintenance recommended: Remove stoplogs and grease seal with Lubriplate Grease. Ensure there is no debris in the tracks or along the bottom of the structure. Replace stoplogs after greasing.)
• Important! To minimize seepage, align stoplogs firmly against one side of the stoplog track
• Stoplogs must remain in track during structure installation
• Structure must be anchored down when installed or it may have the tendency to float
• Structures are not pressure rated
• Structures are intended for gravity flow: Low pressure and some seepage may occur
• 5-year warranty on all standard structures
• 5-year warranty on all standard structures
• Customized or special orders will carry a 1-year warranty on workmanship and material and are nonreturnable
• Inside Diameter Width: 24"
• Inside Diameter Depth: 14"

Inlet Water Level Control Structures are designed to control the depth and volume of water within a wetland or pond by removing surface water.

Features

• Constructed of rugged 1/2" PVC
• Stainless steel screws and custom anodized aluminum corner extrusions used for strength and durability
• Flexible couplers allow PVC, plastic pipe, or other materials to be easily attached. (Please specify type of pipe when ordering.)
• Stoplogs made of PVC in 5" and 7" heights for adjustability. (Maintenance recommended: Remove stoplogs and grease seal with Lubriplate Grease. Ensure there is no debris in the tracks or along the bottom of the structure. Replace stoplogs after greasing.)
• Important! To minimize seepage, align stoplogs firmly against one side of the stoplog track
• Stoplogs must remain in track during structure installation
• Structure must be anchored down when installed or it may have the tendency to float
• Structures are not pressure rated
• Structures are intended for gravity flow: Low pressure and some seepage may occur
• 5-year warranty on all standard structures
• 5-year warranty on all standard structures
• Customized or special orders will carry a 1-year warranty on workmanship and material and are nonreturnable
• Inside Diameter Width: 31"
• Inside Diameter Depth: 18"

Inlet Water Level Control Structures are designed to control the depth and volume of water within a wetland or pond by removing surface water.

Features

• Constructed of rugged 1/2" PVC
• Stainless steel screws and custom anodized aluminum corner extrusions used for strength and durability
• Flexible couplers allow PVC, plastic pipe, or other materials to be easily attached. (Please specify type of pipe when ordering.)
• Stoplogs made of PVC in 5" and 7" heights for adjustability. (Maintenance recommended: Remove stoplogs and grease seal with Lubriplate Grease. Ensure there is no debris in the tracks or along the bottom of the structure. Replace stoplogs after greasing.)
• Important! To minimize seepage, align stoplogs firmly against one side of the stoplog track
• Stoplogs must remain in track during structure installation
• Structure must be anchored down when installed or it may have the tendency to float
• Structures are not pressure rated
• Structures are intended for gravity flow: Low pressure and some seepage may occur
• 5-year warranty on all standard structures
• 5-year warranty on all standard structures
• Customized or special orders will carry a 1-year warranty on workmanship and material and are nonreturnable
• Inside Diameter Width: 31"
• Inside Diameter Depth: 18"

Inlet Water Level Control Structures are designed to control the depth and volume of water within a wetland or pond by removing surface water.

Features

• Constructed of rugged 1/2" PVC
• Stainless steel screws and custom anodized aluminum corner extrusions used for strength and durability
• Flexible couplers allow PVC, plastic pipe, or other materials to be easily attached. (Please specify type of pipe when ordering.)
• Stoplogs made of PVC in 5" and 7" heights for adjustability. (Maintenance recommended: Remove stoplogs and grease seal with Lubriplate Grease. Ensure there is no debris in the tracks or along the bottom of the structure. Replace stoplogs after greasing.)
• Important! To minimize seepage, align stoplogs firmly against one side of the stoplog track
• Stoplogs must remain in track during structure installation
• Structure must be anchored down when installed or it may have the tendency to float
• Structures are not pressure rated
• Structures are intended for gravity flow: Low pressure and some seepage may occur
• 5-year warranty on all standard structures
• 5-year warranty on all standard structures
• Customized or special orders will carry a 1-year warranty on workmanship and material and are nonreturnable
• Inside Diameter Width: 31"
• Inside Diameter Depth: 18"

Inlet Water Level Control Structuresare designed to control the depth and volume of water within a wetland or pond by removing surface water.

Features

• Constructed of rugged 1/2" PVC
• Stainless steel screws and custom anodized aluminum corner extrusions used for strength and durability
• Flexible couplers allow PVC, plastic pipe, or other materials to be easily attached. (Please specify type of pipe when ordering.)
• Stoplogs made of PVC in 5" and 7" heights for adjustability. (Maintenance recommended: Remove stoplogs and grease seal with Lubriplate Grease. Ensure there is no debris in the tracks or along the bottom of the structure. Replace stoplogs after greasing.)
• Important! To minimize seepage, align stoplogs firmly against one side of the stoplog track
• Stoplogs must remain in track during structure installation
• Structure must be anchored down when installed or it may have the tendency to float
• Structures are not pressure rated
• Structures are intended for gravity flow: Low pressure and some seepage may occur
• 5-year warranty on all standard structures
• 5-year warranty on all standard structures
• Customized or special orders will carry a 1-year warranty on workmanship and material and are nonreturnable
• Inside Diameter Width: 31"
• Inside Diameter Depth: 18"