Reed Large Diameter Pipe Tools

PURCHASE FROM OUR STORE

Reed FRL Filter - Regulator - Lubricator 97591

Reed FRL Filter - Regulator - Lubricator 97591

  • SKU: FRL
  • Brand:

  • Product Description:

    An FRL (filter-regulator-lubricator) appliance is key to preparing clean air for use in pneumatic system tools. Use of prepared air allows tools and equipment to operate with maximum effectiveness and efficiency. Always use an FRL with REED pneumatic tools such as the Saw It®, Power Drives and Universal Pipe Cutters. Failure to use an FRL may result in premature motor failure and will negate warranty.

    • Maximize tool efficiency by using clean air.
    • Protect pneumatic motors from contamination by using an FRL.

    NOTES:

    1. Use clean dry air. Air containing excessive water will cause damage. MAX PRESSURE that can be used with this FRL is 120 PSI.

    2. Oil amount adjusting valve is operated manually. Counterclockwise rotation increases amount. Three turns opens valve fully. Numbers on scale do not indicate drop amounts.

    3. Periodically check water level in air filter bowl. Remove water by depressing small red button (MANUAL WATER DRAIN) on bottom of air filter bowl.


Reed SAWITBG21 Saw It 21

Reed SAWITBG21 Saw It 21" Blade Guide 04602

  • SKU: SAWITBG21
  • Brand:

  • Product Description:

    Saw It® Blade Guides reach across the work being cut and stabilize the blade so that it does not whip and vibrate. This extends the blade life, squares the cut and helps eliminate accidental blade breakage. Blade guides are sized to match blade length. Use the SAWITBG21 on 21” long blades and the SAWITBG30 on 30” blades.

    • Used with the Saw It® Pneumatic Saw to provide greater operator control of the blade’s cutting path.
    •  
    • Fits: 21" Long Blades
    • Capacity: Up to 12"

Reed SAWITBG30 Saw It 30

Reed SAWITBG30 Saw It 30" Blade Guide 04603

  • SKU: SAWITBG30
  • Brand:

  • Product Description:

    Saw It® Blade Guides reach across the work being cut and stabilize the blade so that it does not whip and vibrate. This extends the blade life, squares the cut and helps eliminate accidental blade breakage. Blade guides are sized to match blade length. Use the SAWITBG21 on 21” long blades and the SAWITBG30 on 30” blades.

    • Used with the Saw It® Pneumatic Saw to provide greater operator control of the blade’s cutting path.
    •  
    • Fits: 30" Long Blades
    • Capacity: Up to 20"

Reed SAWITSD2 Saw It® Pnuematic Reciprocating Saw 07620

Reed SAWITSD2 Saw It® Pnuematic Reciprocating Saw 07620

  • SKU: SAWITSD2
  • Brand:

  • Product Description:

    Saw It® pneumatic reciprocating saw provides power and reciprocating motion to blades. With Power Hack Saw Blades (sold separately), this saw cuts steel and stainless steel pipe, plus plastic pipe such as C900 and PE. SAWITSD2 is powered pneumatically and offers powerful 2 HP motor and adjustable exhaust flow air direction. Saw It turns and works freely, along with starting easy and running smoothly. As a safety feature, a trigger lock prevents accidental “on” if the trigger is bumped or pressed unintentionally. Saw It® needs 6” clearance beyond the pipe to accommodate blade movement. Site preparation requires less excavation then some cut-off tools. Air-powered, this tool eliminates electric shock hazards.  Unlike gas-powered tools, this unit has no fumes.  Severe in-ditch environments, including those with water, are not a problem for the Saw It pneumatic reciprocating saw, unlike electric or gas powered tools.

    The Saw It® must have a means to hold it in place and the recommended Saw It® Vise (sold separately) provides stability and safety for the cut. Optional Blade Guides provide directional guidance for the saw.  Maximum capacity is blade and blade guide dependent. Saw It® pneumatic reciprocating saw cuts up to 24” diameter pipe when used with the Saw It® Vise and a 12” chain extension.  Saw It® cuts up to 20” (500 mm) diameter pipe when used with recommended SAWITBG30 blade guide.  Pneumatic saws are less likely to ignite materials than gas-powered saws and even some electrical-powered saws. However, the Saw It® is not recommended for gas lines.

     

    NOTES:

    • Always use a Filter-Regulator-Lubricator (FRL) with REED pneumatic tools like the Saw It®. REED offers FRL #97591 for user convenience.
    • Saw It Vise #04600 fits 4” - 12” diameter pipe.  When one chain extension, 6” or 12”, is added, the vise capacity increases to 18” or 24” respectively.
    • 14 TPI blades work on materials at least 1/8” thick. 8 TPI blades work on materials at least 3/16” thick. Use fewer blade teeth per inch on softer materials like plastic.
    • Saw It® pneumatic reciprocating saw is a good choice for cutting plastic and steel pipe and a great cutting tool for hard-to-reach places.
    • Safety deadman switch for instant off when throttle is released.
    • Pneumatic (air) motor eliminates electric shock hazard.
    • No fumes like gas powered cut-off saws.
    • Site preparation requires less excavation then some cut-off tools.
    • Continues to run underwater, in severe in-ditch environments, unlike electric or gas powered tools.
    • Saw It® Vise and Saw It® Blade Guides should be added for extra stability.
    • Blades sold separately.  Use Reed's Power Hack Saw Blades.
    • Pipe Diameter: up to 24" Max (Dependent on blade and chain extensions.
    • Maximum Power: 2.0 HP, 1.5 kW
    • Air Consumption: 40 cfm @ 90 psi
    • Application: Aluminum, Copper, Plastic, Steel / Stainless Steel Schedule 40, Steel Tubing

     


Reed Z1014 Power Hack Saw Blade 04479

Reed Z1014 Power Hack Saw Blade 04479

  • SKU: Z1014
  • Brand:

  • Product Description:

    For speed, straightness of cut, long life and safety, these bi-metal, portable, power hack saw blades are the best choice for the REED Saw It® and heavy-duty power hack saws made by Widder®, Fein®, and Spitznas®. The extra blade depth (1 3/8”) and the Matrix® high-speed steel (HSS) cutting edge allow a straighter cut. Bi-metal blade construction reduces the tendency of solid HSS blades to shatter. Wavy set and high tooth hardness yield longer life blade life. Portable power hack saw blades cut copper, steel, stainless steel, aluminum, and harder plastics like PVC and ABS.

    • Blade length should be at least 6" more than the O.D. of the pipe.
    • Cut copper, steel, stainless steel, aluminum, and harder plastics like PVC and ABS.
    • Wavy set teeth provide clearance for the blade to pass through the cut.
    •  
    • Length: 10"
    • Width: 1 3/8"
    • Thickness: .062"
    • Teeth per Inch: 14

    Blades are available from 8" -30" long


Reed Z1214 Power Hack Saw Blade 04494

Reed Z1214 Power Hack Saw Blade 04494

  • SKU: Z1214
  • Brand:

  • Product Description:

    For speed, straightness of cut, long life and safety, these bi-metal, portable, power hack saw blades are the best choice for the REED Saw It® and heavy-duty power hack saws made by Widder®, Fein®, and Spitznas®. The extra blade depth (1 3/8”) and the Matrix® high-speed steel (HSS) cutting edge allow a straighter cut. Bi-metal blade construction reduces the tendency of solid HSS blades to shatter. Wavy set and high tooth hardness yield longer life blade life. Portable power hack saw blades cut copper, steel, stainless steel, aluminum, and harder plastics like PVC and ABS.

    • Blade length should be at least 6" more than the O.D. of the pipe.
    • Cut copper, steel, stainless steel, aluminum, and harder plastics like PVC and ABS.
    • Wavy set teeth provide clearance for the blade to pass through the cut.
    •  
    • Length: 12"
    • Width: 1 3/8"
    • Thickness: .062"
    • Teeth per Inch: 14

    Blades are available from 8" -30" long


Reed Z1608 Power Hack Saw Blade 04499

Reed Z1608 Power Hack Saw Blade 04499

  • SKU: Z1608
  • Brand:

  • Product Description:

    For speed, straightness of cut, long life and safety, these bi-metal, portable, power hack saw blades are the best choice for the REED Saw It® and heavy-duty power hack saws made by Widder®, Fein®, and Spitznas®. The extra blade depth (1 3/8”) and the Matrix® high-speed steel (HSS) cutting edge allow a straighter cut. Bi-metal blade construction reduces the tendency of solid HSS blades to shatter. Wavy set and high tooth hardness yield longer life blade life. Portable power hack saw blades cut copper, steel, stainless steel, aluminum, and harder plastics like PVC and ABS.

    • Blade length should be at least 6" more than the O.D. of the pipe.
    • Cut copper, steel, stainless steel, aluminum, and harder plastics like PVC and ABS.
    • Wavy set teeth provide clearance for the blade to pass through the cut.
    •  
    • Length: 16"
    • Width: 1 3/8"
    • Thickness: .062"
    • Teeth per Inch: 8

    Blades are available from 8" -30" long


Reed Z1614 Power Hack Saw Blade 04495

Reed Z1614 Power Hack Saw Blade 04495

  • SKU: Z1614
  • Brand:

  • Product Description:

    For speed, straightness of cut, long life and safety, these bi-metal, portable, power hack saw blades are the best choice for the REED Saw It® and heavy-duty power hack saws made by Widder®, Fein®, and Spitznas®. The extra blade depth (1 3/8”) and the Matrix® high-speed steel (HSS) cutting edge allow a straighter cut. Bi-metal blade construction reduces the tendency of solid HSS blades to shatter. Wavy set and high tooth hardness yield longer life blade life. Portable power hack saw blades cut copper, steel, stainless steel, aluminum, and harder plastics like PVC and ABS.

    • Blade length should be at least 6" more than the O.D. of the pipe.
    • Cut copper, steel, stainless steel, aluminum, and harder plastics like PVC and ABS.
    • Wavy set teeth provide clearance for the blade to pass through the cut.
    •  
    • Length: 16"
    • Width: 1 3/8"
    • Thickness: .062"
    • Teeth per Inch: 14

    Blades are available from 8" -30" long


Reed Z2108 Power Hack Saw Blade 04597

Reed Z2108 Power Hack Saw Blade 04597

  • SKU: Z2108
  • Brand:

  • Product Description:

    For speed, straightness of cut, long life and safety, these bi-metal, portable, power hack saw blades are the best choice for the REED Saw It® and heavy-duty power hack saws made by Widder®, Fein®, and Spitznas®. The extra blade depth (1 3/8”) and the Matrix® high-speed steel (HSS) cutting edge allow a straighter cut. Bi-metal blade construction reduces the tendency of solid HSS blades to shatter. Wavy set and high tooth hardness yield longer life blade life. Portable power hack saw blades cut copper, steel, stainless steel, aluminum, and harder plastics like PVC and ABS.

    • Blade length should be at least 6" more than the O.D. of the pipe.
    • Cut copper, steel, stainless steel, aluminum, and harder plastics like PVC and ABS.
    • Wavy set teeth provide clearance for the blade to pass through the cut.
    •  
    • Length: 21"
    • Width: 1 3/8"
    • Thickness: .062"
    • Teeth per Inch: 8

    Blades are available from 8" -30" long


Reed Z2114 Power Hack Saw Blade 04496

Reed Z2114 Power Hack Saw Blade 04496

  • SKU: Z2114
  • Brand:

  • Product Description:

    For speed, straightness of cut, long life and safety, these bi-metal, portable, power hack saw blades are the best choice for the REED Saw It® and heavy-duty power hack saws made by Widder®, Fein®, and Spitznas®. The extra blade depth (1 3/8”) and the Matrix® high-speed steel (HSS) cutting edge allow a straighter cut. Bi-metal blade construction reduces the tendency of solid HSS blades to shatter. Wavy set and high tooth hardness yield longer life blade life. Portable power hack saw blades cut copper, steel, stainless steel, aluminum, and harder plastics like PVC and ABS.

    • Blade length should be at least 6" more than the O.D. of the pipe.
    • Cut copper, steel, stainless steel, aluminum, and harder plastics like PVC and ABS.
    • Wavy set teeth provide clearance for the blade to pass through the cut.
    •  
    • Length: 21"
    • Width: 1 3/8"
    • Thickness: .062"
    • Teeth per Inch: 14

    Blades are available from 8" -30" long


Reed Z2414 Power Hack Saw Blade 04497

Reed Z2414 Power Hack Saw Blade 04497

  • SKU: Z2414
  • Brand:

  • Product Description:

    For speed, straightness of cut, long life and safety, these bi-metal, portable, power hack saw blades are the best choice for the REED Saw It® and heavy-duty power hack saws made by Widder®, Fein®, and Spitznas®. The extra blade depth (1 3/8”) and the Matrix® high-speed steel (HSS) cutting edge allow a straighter cut. Bi-metal blade construction reduces the tendency of solid HSS blades to shatter. Wavy set and high tooth hardness yield longer life blade life. Portable power hack saw blades cut copper, steel, stainless steel, aluminum, and harder plastics like PVC and ABS.

    • Blade length should be at least 6" more than the O.D. of the pipe.
    • Cut copper, steel, stainless steel, aluminum, and harder plastics like PVC and ABS.
    • Wavy set teeth provide clearance for the blade to pass through the cut.
    •  
    • Length: 24"
    • Width: 1 3/8"
    • Thickness: .062"
    • Teeth per Inch: 14

    Blades are available from 8" -30" long


Reed Z3014 Power Hack Saw Blade 04498

Reed Z3014 Power Hack Saw Blade 04498

  • SKU: Z3014
  • Brand:

  • Product Description:

    For speed, straightness of cut, long life and safety, these bi-metal, portable, power hack saw blades are the best choice for the REED Saw It® and heavy-duty power hack saws made by Widder®, Fein®, and Spitznas®. The extra blade depth (1 3/8”) and the Matrix® high-speed steel (HSS) cutting edge allow a straighter cut. Bi-metal blade construction reduces the tendency of solid HSS blades to shatter. Wavy set and high tooth hardness yield longer life blade life. Portable power hack saw blades cut copper, steel, stainless steel, aluminum, and harder plastics like PVC and ABS.

    • Blade length should be at least 6" more than the O.D. of the pipe.
    • Cut copper, steel, stainless steel, aluminum, and harder plastics like PVC and ABS.
    • Wavy set teeth provide clearance for the blade to pass through the cut.
    •  
    • Length: 30"
    • Width: 1 3/8"
    • Thickness: .062"
    • Teeth per Inch: 14

    Blades are available from 8" -30" long