Reed Plastic Pipe Tools

PURCHASE FROM OUR STORE

CPBDBT BEVEL BOSS™ Cordlesss Plastic Pipe Beveler (Base Tool) 04658

CPBDBT BEVEL BOSS™ Cordlesss Plastic Pipe Beveler (Base Tool) 04658

  • SKU: CPBDBT
  • Brand:

  • Product Description:

    Free Ground Shipping - Call for Premium Shipping

    Kit with Beveler Adapter & DeWalt® Die Grinder.   Bit, Battery and Charger NOT INCLUDED.  For complete kit CPBDK

    • Cordless power tool deburrs and bevels plastic pipe quickly.
    • Base tool includes beveler adapter and DeWalt® die grinder ONLY.
    • Runs on DeWalt® 20V battery, sold separately.
    • Add required bit: RBIT1 and RBIT2, choosing from preferred size based on pipe diameter.
    • Check the baseplate arrow for O.D. or I.D. which points to the direction to rotate the beveler around the pipe.
    • Capacity: 2" and up
    • Works exclusively with the DeWalt® 20V cordless die grinder.

    NOTE: If pipe is not stationary, a Reed pipe vise is recommended.

    Bevel Boss™ cordless pipe bevelers quickly and safely bevel 2 inch diameter and larger plastic pipe. The tool's unique design makes REED Bevel Boss™ the only tool in the industry that provides a safe and speedy way to bevel. Cordless pipe beveler trims small to large diameter plastic pipe, including pipe already in the ditch. This lightweight tool significantly reduces prep time by quickly and consistently beveling when doing multiple cuts. These pipe bevelers are used on PVC and CPVC plastic pipe including C900, Corzan® CPVC, Bionax® PVCO (C909) and also ABS. Add bevels on most PVC glued joints and some sizes of bell and gasket joints. Adjustable for bevel length up to 1 inch, the required carbide RBIT1 and RBIT2 cut evenly and efficiently. Battery-powered, this cordless pipe beveler has no fumes! Plus, the guide plate eliminates guesswork about the cut and yields a consistent result. To eliminate damage to the gasket, a pipe bevel is required when installing into a pipe bell. Bevels on cement joints allow for even distribution of solvent cement glue to maximize glue contact area. Always defer to pipe manufacturer specifications for bevel recommendations.

    In addition to complete beveling kits, there are Beveler Adapters to fit Milwaukee®, Bosch® or DeWalt® die grinders. Beveler adapters permit temporary conversion of the die grinder to serve as a beveler.

    Cordless portable pipe beveler adapts to shape pipe interiors, too. For instance, electrical and utility contractors deburr to make pipe interiors snag-free for running wires. To create internal bevels on plastic pipe or conduit of 2 inch inside diameter (ID) or larger, add the REED beveler shroud with guide plate, CPBIDS

    Power Source Specifications:

    DeWalt® model DCG426B 20-Volt MAX XR Lithium-Ion Cordless Brushless Variable Speed Die Grinder

     


CPBDK BEVEL BOSS™ Cordless Plastic Pipe Beveler 04659 (DeWalt)

CPBDK BEVEL BOSS™ Cordless Plastic Pipe Beveler 04659 (DeWalt)

  • SKU: CPBDK
  • Brand:

  • Product Description:

    Free Ground Shipping - Call for Premium Shipping

    Kit with Beveler Adapter, Router Bit, DeWalt® Die Grinder, Battery and Charger

    • Cordless power tool deburrs and bevels plastic pipe quickly.
    • The kit includes the CPB adjustable beveler attachment, DeWalt® die grinder, battery and charger.
    • Check the baseplate arrow for O.D. or I.D. which points to the direction to rotate the beveler around the pipe.
    • Capacity: 2" and up
    • Bevel Length RBIT1 - Adjustable 1/8" - 5/8"   (Included in Kit)
    • Works exclusively with the DeWalt® 20V cordless die grinder.

    For longer Bevel length of 7/16" - 1" order part# RBIT2 (SOLD SEPARATELY)

    NOTE: If pipe is not stationary, a Reed pipe vise is recommended.

    Bevel Boss™ cordless pipe bevelers quickly and safely bevel 2 inch diameter and larger plastic pipe. The tool's unique design makes REED Bevel Boss™ the only tool in the industry that provides a safe and speedy way to bevel. Cordless pipe beveler trims small to large diameter plastic pipe, including pipe already in the ditch. This lightweight tool significantly reduces prep time by quickly and consistently beveling when doing multiple cuts. These pipe bevelers are used on PVC and CPVC plastic pipe including C900, Corzan® CPVC, Bionax® PVCO (C909) and also ABS. Add bevels on most PVC glued joints and some sizes of bell and gasket joints. Adjustable for bevel length up to 1 inch, the required carbide RBIT1 and RBIT2 cut evenly and efficiently. Battery-powered, this cordless pipe beveler has no fumes! Plus, the guide plate eliminates guesswork about the cut and yields a consistent result. To eliminate damage to the gasket, a pipe bevel is required when installing into a pipe bell. Bevels on cement joints allow for even distribution of solvent cement glue to maximize glue contact area. Always defer to pipe manufacturer specifications for bevel recommendations.

    In addition to complete beveling kits, there are Beveler Adapters to fit Milwaukee®, Bosch® or DeWalt® die grinders. Beveler adapters permit temporary conversion of the die grinder to serve as a beveler.

    Cordless portable pipe beveler adapts to shape pipe interiors, too. For instance, electrical and utility contractors deburr to make pipe interiors snag-free for running wires. To create internal bevels on plastic pipe or conduit of 2 inch inside diameter (ID) or larger, add the REED beveler shroud with guide plate, CPBIDS

    Power Source Specifications:

    DeWalt® model DCG426B 20-Volt MAX XR Lithium-Ion Cordless Brushless Variable Speed Die Grinder

     


PPJ Plastic Pipe Joiner Base Unit for Gasket & Solvent Connection 04446

PPJ Plastic Pipe Joiner Base Unit for Gasket & Solvent Connection 04446

PPJ10S Plastic Pipe Joiner 10

PPJ10S Plastic Pipe Joiner 10" Solvent Connection Saddles 04448

PPJ12S Plastic Pipe Joiner 12

PPJ12S Plastic Pipe Joiner 12" Solvent Connection Saddles 04449

PPJ4S Plastic Pipe Joiner 4

PPJ4S Plastic Pipe Joiner 4" Solvent Connection Saddles 04442

PPJ6S Plastic Pipe Joiner 6

PPJ6S Plastic Pipe Joiner 6" Solvent Connection Saddles 04444

PPJ8S Plastic Pipe Joiner 8

PPJ8S Plastic Pipe Joiner 8" Solvent Connection Saddles 04447

PPJFA Plastic Pipe Joiner Fitting Attachment for Solvent Joint 04439

PPJFA Plastic Pipe Joiner Fitting Attachment for Solvent Joint 04439

PPJVS Plastic Pipe Joiner Saddles for Gasketed Pipe 04441

PPJVS Plastic Pipe Joiner Saddles for Gasketed Pipe 04441

Reed BT1 Plastic Pipe Beveler (1 1/2

Reed BT1 Plastic Pipe Beveler (1 1/2" - 8") 04395

  • SKU: BT1
  • Brand:

  • Product Description:

    Free Ground Shipping - Call for Premium Shipping

    Beveler produces a smooth 15° bevel on all types of plastic pipe, including gasketed PVC and C900 PVC in about one minute.

    • Depending on wall thickness, the bevel can be up to 1 1/2” long.
    • Beveler is easily adjusted for different pipe sizes and thicknesses, with no part changes.
    • Bevel blade can be sharpened or replaced.
    • Beveler only needs a few turns around the pipe to make the 15° smooth bevel.
    • Strong, reinforced aluminum frame for durability.
    • Adjusts to bevel multiple sizes with one tool.

    NOTE: If pipe is not stationary, a Reed pipe vise is recommended.


Reed BT2 Plastic Pipe Beveler (1 1/2

Reed BT2 Plastic Pipe Beveler (1 1/2" - 12") 04398

  • SKU: BT2
  • Brand:

  • Product Description:

    Free Ground Shipping - Call for Premium Shipping

    Beveler produces a smooth 15° bevel on all types of plastic pipe, including gasketed PVC and C900 PVC in about one minute.

    • Depending on wall thickness, the bevel can be up to 1 1/2” long.
    • Beveler is easily adjusted for different pipe sizes and thicknesses, with no part changes.
    • Bevel blade can be sharpened or replaced.
    • Beveler only needs a few turns around the pipe to make the 15° smooth bevel.
    • Strong, reinforced aluminum frame for durability.
    • Adjusts to bevel multiple sizes with one tool.

    NOTE: If pipe is not stationary, a Reed pipe vise is recommended.