Kit with Beveler Adapter, Router Bit, DeWalt® Die Grinder, 2 Batteries and Charger

• Cordless power tool deburrs and bevels plastic pipe quickly.
• The kit includes the CPB adjustable beveler attachment, DeWalt® die grinder, battery and charger.
• Check the baseplate arrow for O.D. or I.D. which points to the direction to rotate the beveler around the pipe.
• Capacity: 2" and up
• Bevel Length RBIT1 - Adjustable 1/8" - 5/8"   (Included in Kit)
• Works exclusively with the DeWalt® 20V cordless die grinder.

For longer Bevel length of 7/16" - 1" order part# RBIT2 (SOLD SEPARATELY)

NOTE: If pipe is not stationary, a Reed pipe vise is recommended.

Bevel Boss™ cordless pipe bevelers quickly and safely bevel 2 inch diameter and larger plastic pipe. The tool's unique design makes REED Bevel Boss™ the only tool in the industry that provides a safe and speedy way to bevel. Cordless pipe beveler trims small to large diameter plastic pipe, including pipe already in the ditch. This lightweight tool significantly reduces prep time by quickly and consistently beveling when doing multiple cuts. These pipe bevelers are used on PVC and CPVC plastic pipe including C900, Corzan® CPVC, Bionax® PVCO (C909) and also ABS. Add bevels on most PVC glued joints and some sizes of bell and gasket joints. Adjustable for bevel length up to 1 inch, the required carbide RBIT1 and RBIT2 cut evenly and efficiently. Battery-powered, this cordless pipe beveler has no fumes! Plus, the guide plate eliminates guesswork about the cut and yields a consistent result. To eliminate damage to the gasket, a pipe bevel is required when installing into a pipe bell. Bevels on cement joints allow for even distribution of solvent cement glue to maximize glue contact area. Always defer to pipe manufacturer specifications for bevel recommendations.

In addition to complete beveling kits, there are Beveler Adapters to fit Milwaukee®, Bosch® or DeWalt® die grinders. Beveler adapters permit temporary conversion of the die grinder to serve as a beveler.

Cordless portable pipe beveler adapts to shape pipe interiors, too. For instance, electrical and utility contractors deburr to make pipe interiors snag-free for running wires. To create internal bevels on plastic pipe or conduit of 2 inch inside diameter (ID) or larger, add the REED beveler shroud with guide plate, CPBIDS. 

Power Source Specifications:

DeWalt® model DCG426B 20-Volt MAX XR Lithium-Ion Cordless Brushless Variable Speed Die Grinder

Kit with Beveler Adapter, Router Bit, DeWalt® Die Grinder and Battery (NO CHARGER)

• Cordless power tool deburrs and bevels plastic pipe quickly.
• The kit includes the CPB adjustable beveler attachment, DeWalt® die grinder and battery.
• Check the baseplate arrow for O.D. or I.D. which points to the direction to rotate the beveler around the pipe.
• Capacity: 2" and up
• Bevel Length RBIT1 - Adjustable 1/8" - 5/8"   (Included in Kit)
• Works exclusively with the DeWalt® 20V cordless die grinder.

For longer Bevel length of 7/16" - 1" order part# RBIT2 (SOLD SEPARATELY)

NOTE: If pipe is not stationary, a Reed pipe vise is recommended.

Bevel Boss™ cordless pipe bevelers quickly and safely bevel 2 inch diameter and larger plastic pipe. The tool's unique design makes REED Bevel Boss™ the only tool in the industry that provides a safe and speedy way to bevel. Cordless pipe beveler trims small to large diameter plastic pipe, including pipe already in the ditch. This lightweight tool significantly reduces prep time by quickly and consistently beveling when doing multiple cuts. These pipe bevelers are used on PVC and CPVC plastic pipe including C900, Corzan® CPVC, Bionax® PVCO (C909) and also ABS. Add bevels on most PVC glued joints and some sizes of bell and gasket joints. Adjustable for bevel length up to 1 inch, the required carbide RBIT1 and RBIT2 cut evenly and efficiently. Battery-powered, this cordless pipe beveler has no fumes! Plus, the guide plate eliminates guesswork about the cut and yields a consistent result. To eliminate damage to the gasket, a pipe bevel is required when installing into a pipe bell. Bevels on cement joints allow for even distribution of solvent cement glue to maximize glue contact area. Always defer to pipe manufacturer specifications for bevel recommendations.

In addition to complete beveling kits, there are Beveler Adapters to fit Milwaukee®, Bosch® or DeWalt® die grinders. Beveler adapters permit temporary conversion of the die grinder to serve as a beveler.

Cordless portable pipe beveler adapts to shape pipe interiors, too. For instance, electrical and utility contractors deburr to make pipe interiors snag-free for running wires. To create internal bevels on plastic pipe or conduit of 2 inch inside diameter (ID) or larger, add the REED beveler shroud with guide plate, CPBIDS. 

Power Source Specifications:

DeWalt® model DCG426B 20-Volt MAX XR Lithium-Ion Cordless Brushless Variable Speed Die Grinder

Kit with Beveler Adapter & DeWalt® Die Grinder.   Bit, Battery and Charger NOT INCLUDED.  For complete kit CPBDK

• Cordless power tool deburrs and bevels plastic pipe quickly.
• Base tool includes beveler adapter and DeWalt® die grinder ONLY.
• Runs on DeWalt® 20V battery, sold separately.
• Add required bit: RBIT1 and RBIT2, choosing from preferred size based on pipe diameter.
• Check the baseplate arrow for O.D. or I.D. which points to the direction to rotate the beveler around the pipe.
• Capacity: 2" and up
• Works exclusively with the DeWalt® 20V cordless die grinder.

NOTE: If pipe is not stationary, a Reed pipe vise is recommended.

Bevel Boss™ cordless pipe bevelers quickly and safely bevel 2 inch diameter and larger plastic pipe. The tool's unique design makes REED Bevel Boss™ the only tool in the industry that provides a safe and speedy way to bevel. Cordless pipe beveler trims small to large diameter plastic pipe, including pipe already in the ditch. This lightweight tool significantly reduces prep time by quickly and consistently beveling when doing multiple cuts. These pipe bevelers are used on PVC and CPVC plastic pipe including C900, Corzan® CPVC, Bionax® PVCO (C909) and also ABS. Add bevels on most PVC glued joints and some sizes of bell and gasket joints. Adjustable for bevel length up to 1 inch, the required carbide RBIT1 and RBIT2 cut evenly and efficiently. Battery-powered, this cordless pipe beveler has no fumes! Plus, the guide plate eliminates guesswork about the cut and yields a consistent result. To eliminate damage to the gasket, a pipe bevel is required when installing into a pipe bell. Bevels on cement joints allow for even distribution of solvent cement glue to maximize glue contact area. Always defer to pipe manufacturer specifications for bevel recommendations.

In addition to complete beveling kits, there are Beveler Adapters to fit Milwaukee®, Bosch® or DeWalt® die grinders. Beveler adapters permit temporary conversion of the die grinder to serve as a beveler.

Cordless portable pipe beveler adapts to shape pipe interiors, too. For instance, electrical and utility contractors deburr to make pipe interiors snag-free for running wires. To create internal bevels on plastic pipe or conduit of 2 inch inside diameter (ID) or larger, add the REED beveler shroud with guide plate, CPBIDS. 

Power Source Specifications:

DeWalt® model DCG426B 20-Volt MAX XR Lithium-Ion Cordless Brushless Variable Speed Die Grinder

Kit with Beveler Adapter, Router Bit, DeWalt® Die Grinder, Battery and Charger

• Cordless power tool deburrs and bevels plastic pipe quickly.
• The kit includes the CPB adjustable beveler attachment, DeWalt® die grinder, battery and charger.
• Check the baseplate arrow for O.D. or I.D. which points to the direction to rotate the beveler around the pipe.
• Capacity: 2" and up
• Bevel Length RBIT1 - Adjustable 1/8" - 5/8"   (Included in Kit)
• Works exclusively with the DeWalt® 20V cordless die grinder.

For longer Bevel length of 7/16" - 1" order part# RBIT2 (SOLD SEPARATELY)

NOTE: If pipe is not stationary, a Reed pipe vise is recommended.

Bevel Boss™ cordless pipe bevelers quickly and safely bevel 2 inch diameter and larger plastic pipe. The tool's unique design makes REED Bevel Boss™ the only tool in the industry that provides a safe and speedy way to bevel. Cordless pipe beveler trims small to large diameter plastic pipe, including pipe already in the ditch. This lightweight tool significantly reduces prep time by quickly and consistently beveling when doing multiple cuts. These pipe bevelers are used on PVC and CPVC plastic pipe including C900, Corzan® CPVC, Bionax® PVCO (C909) and also ABS. Add bevels on most PVC glued joints and some sizes of bell and gasket joints. Adjustable for bevel length up to 1 inch, the required carbide RBIT1 and RBIT2 cut evenly and efficiently. Battery-powered, this cordless pipe beveler has no fumes! Plus, the guide plate eliminates guesswork about the cut and yields a consistent result. To eliminate damage to the gasket, a pipe bevel is required when installing into a pipe bell. Bevels on cement joints allow for even distribution of solvent cement glue to maximize glue contact area. Always defer to pipe manufacturer specifications for bevel recommendations.

In addition to complete beveling kits, there are Beveler Adapters to fit Milwaukee®, Bosch® or DeWalt® die grinders. Beveler adapters permit temporary conversion of the die grinder to serve as a beveler.

Cordless portable pipe beveler adapts to shape pipe interiors, too. For instance, electrical and utility contractors deburr to make pipe interiors snag-free for running wires. To create internal bevels on plastic pipe or conduit of 2 inch inside diameter (ID) or larger, add the REED beveler shroud with guide plate, CPBIDS. 

Power Source Specifications:

DeWalt® model DCG426B 20-Volt MAX XR Lithium-Ion Cordless Brushless Variable Speed Die Grinder

• Add a vacuum to the Bevel Boss® as a convenient solution to suction beveling debris.
• Vacuum box connects to 1 1/4" suction hose to collect plastic chips.

Plastic Pipe Joiner Base Unit.    Application: Gasketed Pipe or Solvent Cement Connection

NOTE: Connection saddles for gasketed pipe (PPJVS) or solvent cement connections (Plastic Pipe Joiners – Saddles) must be purchased separately. (PPJ4S, PPJ6S, PPJ8S, PPJ10S, PPJ12S)

• Controlled feed by user prevents over-insertion.
• Easily join or separate gasketed 4”-16” (114 – 434 mm) PVC pipe using the PPJ and PPJVS universal saddles.
• Efficiently connect 4” – 12” (114 - 324 mm) PVC solvent cement joints using the PPJ and individually sized saddles.
• PPJFA Fitting Attachment is required for solvent cement branch connections only.

10" Saddle for use with PPJ Plastic Pipe Joiner to make solvent connection.

• Capacity O.D.: 10.75"
• Saddles balance the PPJ beam and assist in pulling the two pieces of pipe together.
• Pipe saddles are sold by the pair; one for each piece of pipe.
• For use with REED PPJ when making solvent cement connections.
• Match the appropriately sized saddle to the plastic pipe diameter.

NOTE: PPJ Plastic Pipe Joiner Base Unit must be purchased separately.

12" Saddle for use with PPJ Plastic Pipe Joiner to make solvent connection.

• Capacity O.D.: 12.75"
• Saddles balance the PPJ beam and assist in pulling the two pieces of pipe together.
• Pipe saddles are sold by the pair; one for each piece of pipe.
• For use with REED PPJ when making solvent cement connections.
• Match the appropriately sized saddle to the plastic pipe diameter.

NOTE: PPJ Plastic Pipe Joiner Base Unit must be purchased separately.

4" Saddle for use with PPJ Plastic Pipe Joiner to make solvent connection.

• Capacity O.D.: 4.5"
• Saddles balance the PPJ beam and assist in pulling the two pieces of pipe together.
• Pipe saddles are sold by the pair; one for each piece of pipe.
• For use with REED PPJ when making solvent cement connections.
• Match the appropriately sized saddle to the plastic pipe diameter.

NOTE: PPJ Plastic Pipe Joiner Base Unit must be purchased separately.

6" Saddle for use with PPJ Plastic Pipe Joiner to make solvent connection.

• Capacity O.D.: 6.625"
• Saddles balance the PPJ beam and assist in pulling the two pieces of pipe together.
• Pipe saddles are sold by the pair; one for each piece of pipe.
• For use with REED PPJ when making solvent cement connections.
• Match the appropriately sized saddle to the plastic pipe diameter.

NOTE: PPJ Plastic Pipe Joiner Base Unit must be purchased separately.

8" Saddle for use with PPJ Plastic Pipe Joiner to make solvent connection.

• Capacity O.D.: 8.625"
• Saddles balance the PPJ beam and assist in pulling the two pieces of pipe together.
• Pipe saddles are sold by the pair; one for each piece of pipe.
• For use with REED PPJ when making solvent cement connections.
• Match the appropriately sized saddle to the plastic pipe diameter.

NOTE: PPJ Plastic Pipe Joiner Base Unit must be purchased separately.

Plastic Pipe Joiner Fitting Attachment for Solvent Cement Connection.

NOTE: PPJ Plastic Pipe Joiner Base Unit & Connection saddles must be purchased separately.

• Efficiently connect 4” – 12” (114 - 324 mm) PVC solvent cement joints using the PPJ and individually sized saddles. (PPJ4S, PPJ6S, PPJ8S, PPJ10S, PPJ12S)
• PPJFA Fitting Attachment is required for solvent cement branch connections only.