Combination Drilling/Tapping Machines are easier to use, save operating time, and are a better value than any other machine. The CDTM models are tapping machines with the necessary components for conversion to drilling machines. The CDTM1100 is a TM1100 with components for converting to a DM1100.  All these combination models feature REED’s flip clamp. They utilize REED DT series drill taps and REED D series drill bits, hole cutters, heavy-duty hole cutters, and PVC shell cutters. Drill taps, drill bits, and hole cutters must be purchased separately. NPT adapters also available.

• 3/4" & 1" Tap & Drill
• Pipe Diameter: 4" - 48" 
• Modular design allows fast and simple conversion back and forth from tapping to drilling machine.
• Quick clamp feed mechanism requires little adjustment, saving time for the operator.
• Compact design requires less digging as radius = 32” which is less than competitor models.

09304 CDTM1100 Kit includes:

Item Code      Description
99309            Boring Bar Assembly
99300            Threaded Body
98430            Top Chamber Assembly
99305            Feed Assembly
40383            13/16” Female Drive Ratchet Wrench
40417            Steel Toolbox
98425            Tapping Compound
98417            5 ft. Chain
40369            Chain Hook
40372            Saddle Gasket
40371            Saddle Ring Gasket
40405            5/8" Combination Wrench
98423            3/4" Corporation Insertion Tool
98424            1" Corporation Insertion Tool
98422            Adapter Shank
98411            Bearing Sleeve
98412            Knockout Pin
08423            3/4" Corp Adapter
08424            1" Corp Adapter
98461            3/4" Drill Adapter
98462            1" Drill Adapter
99304            DM Boring Bar
02205            CW10 10" Adj. Wrench
40396            1/2" Ball Valve
97564            1/2" Nipple
99308            3/32 Hex Key
94150            PVC Drill Adapter
02112            RSPUD Spud Wrench

Combination Drilling/Tapping Machines are easier to use, save operating time, and are a better value than any other machine. The CDTM models are tapping machines with the necessary components for conversion to drilling machines. The CDTM2100 is a TM1100 with components for converting to a DM2100.  All these combination models feature REED’s flip clamp. They utilize REED DT series drill taps and REED D series drill bits, hole cutters, heavy-duty hole cutters, and PVC shell cutters. Drill taps, drill bits, and hole cutters must be purchased separately. NPT adapters also available.

• 3/4" & 1" Tap
• 3/4 - 2" Drill
• Pipe Diameter: 4" - 48" 
• Modular design allows fast and simple conversion back and forth from tapping to drilling machine.
• Quick clamp feed mechanism requires little adjustment, saving time for the operator.
• Compact design requires less digging as radius = 32” which is less than competitor models.

09314 CDTM2100 Kit includes:

Item Code   Description
99309         Boring Bar Assembly
99300         Threaded Body
98430         Top Chamber Assembly
99305         Feed Assembly
40383         13/16” Female Drive Ratchet Wrench
40417         Steel Toolbox
98425         Tapping Compound
98417         5 ft. Chain
40369         Chain Hook
40372         Saddle Gasket
40371         Saddle Ring Gasket
40405         5/8" Combination Wrench
98423         3/4" Corporation Insertion Tool
98424         1" Corporation Insertion Tool
98422         Adapter Shank
98411         Bearing Sleeve
98412         Knockout Pin
08423         3/4" Corp Adapter
08424         1" Corp Adapter
98461         3/4" Drill Adapter
98462         1" Drill Adapter
99304         DM Boring Bar
02205         CW10 10" Adj. Wrench
40396         1/2" Ball Valve
97564         1/2" Nipple
08413         Hole Saw Adapter
08425         1½” AWWA Corp Adapter
08426         2” AWWA Corp Adapter
99308         3/32 Hex Key
94150          PVC Drill Adapter
02112          RSPUD Spud Wrench

Combination Drilling/Tapping Machines are easier to use, save operating time, and are a better value than any other machine. The CDTM models are tapping machines with the necessary components for conversion to drilling machines. The CDTM2100 is a TM1100 with components for converting to a DM2100.  All these combination models feature REED’s flip clamp. They utilize REED DT series drill taps and REED D series drill bits, hole cutters, heavy-duty hole cutters, and PVC shell cutters. Drill taps, drill bits, and hole cutters must be purchased separately. NPT adapters also available.

• 3/4" & 1" 110 Tap Adapters
• 3/4 - 2" Drill
• Pipe Diameter: 4" - 48" 
• Modular design allows fast and simple conversion back and forth from tapping to drilling machine.
• Quick clamp feed mechanism requires little adjustment, saving time for the operator.
• Compact design requires less digging as radius = 32” which is less than competitor models.

09323 CDTM2100110 Kit includes:

Item Code       Description
99309               Boring Bar Assembly
99300               Threaded Body
98430               Top Chamber Assembly
99305               Feed Assembly
40383               13/16” Female Drive Ratchet Wrench
40417               Steel Toolbox
98425               Tapping Compound
98417               5 ft. Chain
40369               Chain Hook
40372               Saddle Gasket
40371               Saddle Ring Gasket
40405               5/8" Combination Wrench
98423               3/4" Corporation Insertion Tool
98424               1" Corporation Insertion Tool
98422               Adapter Shank
98411               Bearing Sleeve
98412               Knockout Pin
08423               3/4" Corp Adapter
08424               1" Corp Adapter
98461               3/4" Drill Adapter
98462               1" Drill Adapter
99304               DM Boring Bar
02205               CW10 10" Adj. Wrench
40396               1/2" Ball Valve
97564               1/2" Nipple
08413               Hole Saw Adapter
08431               1½” Mueller® 110 Comp Corp Adapter
08432               2” Mueller® 110 Comp Corp Adapter 
99308               3/32 Hex Key
94150               PVC Drill Adapter
02112               RSPUD Spud Wrench

DM2100 drilling machine has the base and accessories to work for AWWA threads up to 2”.

• Size: 3/4" - 2" AWWA
• Drilling Machine unit alone weighs 13.2 lbs
• Drilling Machines have a quick clamp feed mechanism requiring little adjustment.
• These machines are more compact, thus requiring less clearance than other models.
• Modular design allows fast and simple conversion to direct tapping machine.

09312 DM2100 Drilling Machine Kit includes:

09301   DM2100B BASE MACHINE in Carrying Case
04561   HSPD 1/4" PILOT DRILL BIT
08413   DMHSA HOLE SAW ADAPTER
08423   DMCA75 3/4" CORPORATION ADAPTER
08424   DMCA100 1" CORPORATION ADAPTER
08425   DMCA150 1 1/2" AWWA CORPORATION ADAPTER
08426   DMCA200 2" AWWA CORPORATION ADAPTER
98461   DMDA75 3" EXTENSION for D688 DRILL BIT
98462   DMDA100 3" EXTENSION for D875 or D938 DRILL BIT

DM2100110 drilling machine has the base and accessories to work for 110 Compression up to 2”.

• Size: 3/4" - 2" 110 Compression
• Drilling Machine unit alone weighs 13.2 lbs
• Drilling Machines have a quick clamp feed mechanism requiring little adjustment.
• These machines are more compact, thus requiring less clearance than other models.
• Modular design allows fast and simple conversion to direct tapping machine.

09317 DM2100110 Drilling Machine Kit includes:

09301   DM2100B BASE MACHINE in Carrying Case
04561   HSPD 1/4" PILOT DRILL BIT
08413   DMHSA HOLE SAW ADAPTER
08423   DMCA75 3/4" CORPORATION ADAPTER
08424   DMCA100 1" CORPORATION ADAPTER
08431   DMCA110150 1 1/2" CORPORATION ADAPTER
08432   DMCA110200 2" CORPORATION ADAPTER
98461   DMDA75 3" EXTENSION for D688 DRILL BIT
98462   DMDA100 3" EXTENSION for D875 or D938 DRILL BIT

DM2100NPT drilling machine has the base and accessories to work for NPT threads up to 2”.

• Size: 3/4" - 2" NPT Corp Stops
• Drilling Machine unit alone weighs 13.2 lbs
• Drilling Machines have a quick clamp feed mechanism requiring little adjustment.
• These machines are more compact, thus requiring less clearance than other models.
• Modular design allows fast and simple conversion to direct tapping machine.

Note: Additional boring bar needed for 2" iron body gate valves.

09315 DM2100NPT Drilling Machine Kit includes:

09301   DM2100B BASE MACHINE in Carrying Case
04561   HSPD 1/4" PILOT DRILL BIT
08413   DMHSA HOLE SAW ADAPTER
08423   DMCA75 3/4" CORPORATION ADAPTER
08424   DMCA100 1" CORPORATION ADAPTER
08428   DMCA150NPT 1 1/2" NPT CORPORATION ADAPTER
08429   DMCA200NPT 2" NPT CORPORATION ADAPTER
98472   DM75 CORPORATION ADAPTER CONVERTER NPT-AWWA 3/4" Adapter
98473   DM100 CORPORATION ADAPTER CONVERTER NPT-AWWA 1" Adapter
98481   3/4" DRILL BIT EXTENDER
98482   1" DRILL BIT EXTENDER

DM2100UNIVERSAL drilling machine has the base and accessories to work for AWWA and NPT threads up to 2”.

• Size: 3/4" - 2" AWWA & NPT
• Drilling Machine unit alone weighs 13.2 lbs
• Drilling Machines have a quick clamp feed mechanism requiring little adjustment.
• These machines are more compact, thus requiring less clearance than other models.
• Modular design allows fast and simple conversion to direct tapping machine.

Other Parts impacted: 40396, 40403, 40427, 0461

09321 DM2100UNIVERSAL Drilling Machine Kit includes:

09301   DM2100B BASE MACHINE in Carrying Case
08413   DMHSA HOLE SAW ADAPTER
08423   DMCA75 3/4" CORPORATION ADAPTER
08424   DMCA100 1" CORPORATION ADAPTER
08425   DMCA150 1-1/2" AWWA CORPORATION ADAPTER
08426   DMCA200 2" AWWA CORPORATION ADAPTER
08428   DMCA150NPT 1-1/2" NPT CORPORATION ADAPTER
08429   DMCA200NPT 2" NPT CORPORATION ADAPTER
98461   DMDA75 3" EXTENSION for D688 DRILL BIT
98462   DMDA100 3" EXTENSION for D875 or D938 DRILL BIT
98472   DM75 CORPORATION ADAPTER CONVERTER 3/4" NPT - 3/4" AWWA
98473   DM100 CORPORATION ADAPTER CONVERTER 1" NPT - 1" AWWA
98481   3/4" DRILL BIT EXTENDER
98482   1" DRILL BIT EXTENDER

• FT2000 kit contains machine, corp adapters and cutters to saddle tap ¾” – 2” for AWWA with ¾” – 1” for flare or compression and 1 ½” – 2” for flare.

09162 FT2000 includes:

09160   FTB FEED TAP BASIC KIT (See Below)
09113   FTAA ARBOR ASSEMBLY
09170   FT75CC110 3/4" AWWA-110 COMPRESSION CORP ADAPTER
09171   FT100CC110 1" AWWA - 110 COMPRESSION CORP ADAPTER
09172   FT150 1-1/2" AWWA CORP ADAPTER
09174   FT200 2" AWWA CORP ADAPTER
99132   FTSC688 11/16" SHELL CUTTER
99134   FTSC875 7/8" SHELL CUTTER
99137   FTSC1438 1-7/16" SHELL CUTTER
99138   FTSC1750 1-3/4" SHELL CUTTER

09160 FTB FEED TAP BASIC KIT includes:

Feed Tap Main Unit along with

02114   RCORP CORPORATION WRENCH
02207   CW12 12" ADJUSTABLE WRENCH
02655   PGP10 POSITIVE GRIP PLIERS
08358   MCR3/8 MAGNETIC COUPON RETAINER SET, 3/8"
08359   MCR1/4 MAGNETIC COUPON RETAINER SET, 1/4"
40296   HEX WRENCH
04561   1/4" PILOT DRILL BIT
99129   CRPD25 COUPON RETAINING PILOT DRILL
99140   TMTC6 6oz TAPPING COMPOUND

• FT2000CC110 kit contains machine, corporation adapters and cutters to saddle tap 3/4" - 2" for AWWA / 110 compression. 

09161 FT2000CC110 includes:

09160   FTB FEED TAP BASIC KIT (See Below)
09113   FTAA ARBOR ASSEMBLY
09170   FT75CC110 3/4" AWWA-110 COMPRESSION CORP ADAPTER
09171   FT100CC110 1" AWWA - 110 COMPRESSION CORP ADAPTER
09172   FT150 1-1/2" AWWA CORP ADAPTER
09173   FT150110 1-1/2" 110 COMPRESSION CORP ADAPTER
09174   FT200 2" AWWA CORP ADAPTER
09175   FT200110 2" 110 COMPRESSION CORP ADAPTER
99132   FTSC688 11/16" SHELL CUTTER
99134   FTSC875 7/8" SHELL CUTTER
99137   FTSC1438 1-7/16" SHELL CUTTER
99138   FTSC1750 1-3/4" SHELL CUTTER

09160 FTB FEED TAP BASIC KIT includes:

Feed Tap Main Unit along with

02114   RCORP CORPORATION WRENCH
02207   CW12 12" ADJUSTABLE WRENCH
02655   PGP10 POSITIVE GRIP PLIERS
08358   MCR3/8 MAGNETIC COUPON RETAINER SET, 3/8"
08359   MCR1/4 MAGNETIC COUPON RETAINER SET, 1/4"
40296   HEX WRENCH
04561   1/4" PILOT DRILL BIT
99129   CRPD25 COUPON RETAINING PILOT DRILL
99140   TMTC6 6oz TAPPING COMPOUND

• Complete Feed Tap Kit 3/4" - 2"
• FT2000UNIV kit contains machine, corp adapters and cutters to saddle tap ¾” – 2” for flare, compression and NPT applications.
• Compact design, featuring a separate, independent feed control for advancing the heavy-duty shell cutter into the pipe, allows the user to easily complete the tap using a drill.
• To saddle tap cast/ductile iron pipe, use drill power.
• According to Uni-Bell PVC Pipe Association recommendations, PVC and other plastic pipe must be tapped manually.  Add on Reed's #04428 and #48206 as the ratchet wrench and socket to fit the Feed Tap machine.

Parts impacted: 99103, 48161, 04561

09165 FT2000UNIV includes:

09160   FTB FEED TAP BASIC KIT  (See Below)
09113   FTAA ARBOR ASSEMBLY
09170   FT75CC110 3/4" AWWA-110 COMPRESSION CORP ADAPTER
09171   FT100CC110 1" AWWA - 110 COMPRESSION CORP ADAPTER
09172   FT150 1-1/2" AWWA CORP ADAPTER
09173   FT150110 1-1/2" 110 COMPRESSION CORP ADAPTER
09174   FT200 2" AWWA CORP ADAPTER
09175   FT200110 2" 110 COMPRESSION CORP ADAPTER
48205   FTSA3/8 SOCKET ADAPTER
48206   FTSCKT3/8 SOCKET 7/16" DEEP WELL SOCKET, 3/8" DRIVE
99109   FT150NPT 1-1/2" NPT (IPS,FORD) ADAPTER
99112   FT200NPT 2" NPT (IPS,FORD) ADAPTER
99117   FT75NPT 3/4" NPT ADAPTER
99118   FT100NPT 1" NPT ADAPTER
99132   FTSC688 11/16" SHELL CUTTER
99134   FTSC875 7/8" SHELL CUTTER
99137   FTSC1438 1-7/16" SHELL CUTTER
99138   FTSC1750 1-3/4" SHELL CUTTER

09160 FTB FEED TAP BASIC KIT includes:

Feed Tap Main Unit along with
02114   RCORP CORPORATION WRENCH
02207   CW12 12" ADJUSTABLE WRENCH
02655   PGP10 POSITIVE GRIP PLIERS
08358   MCR3/8 MAGNETIC COUPON RETAINER SET, 3/8"
08359   MCR1/4 MAGNETIC COUPON RETAINER SET, 1/4"
40296   HEX WRENCH
04561   1/4" PILOT DRILL BIT
99129   CRPD25 COUPON RETAINING PILOT DRILL
99140   TMTC6 6oz TAPPING COMPOUND