Combination Drilling/Tapping Machines are easier to use, save operating time, and are a better value than any other machine. The CDTM models are tapping machines with the necessary components for conversion to drilling machines. The CDTM1100 is a TM1100 with components for converting to a DM1100.  All these combination models feature REED’s flip clamp. They utilize REED DT series drill taps and REED D series drill bits, hole cutters, heavy-duty hole cutters, and PVC shell cutters. Drill taps, drill bits, and hole cutters must be purchased separately. NPT adapters also available.

• 3/4" & 1" Tap & Drill
• Pipe Diameter: 4" - 48" 
• Modular design allows fast and simple conversion back and forth from tapping to drilling machine.
• Quick clamp feed mechanism requires little adjustment, saving time for the operator.
• Compact design requires less digging as radius = 32” which is less than competitor models.

09304 CDTM1100 Kit includes:

Item Code      Description
99309            Boring Bar Assembly
99300            Threaded Body
98430            Top Chamber Assembly
99305            Feed Assembly
40383            13/16” Female Drive Ratchet Wrench
40417            Steel Toolbox
98425            Tapping Compound
98417            5 ft. Chain
40369            Chain Hook
40372            Saddle Gasket
40371            Saddle Ring Gasket
40405            5/8" Combination Wrench
98423            3/4" Corporation Insertion Tool
98424            1" Corporation Insertion Tool
98422            Adapter Shank
98411            Bearing Sleeve
98412            Knockout Pin
08423            3/4" Corp Adapter
08424            1" Corp Adapter
98461            3/4" Drill Adapter
98462            1" Drill Adapter
99304            DM Boring Bar
02205            CW10 10" Adj. Wrench
40396            1/2" Ball Valve
97564            1/2" Nipple
99308            3/32 Hex Key
94150            PVC Drill Adapter
02112            RSPUD Spud Wrench

Combination Drilling/Tapping Machines are easier to use, save operating time, and are a better value than any other machine. The CDTM models are tapping machines with the necessary components for conversion to drilling machines. The CDTM2100 is a TM1100 with components for converting to a DM2100.  All these combination models feature REED’s flip clamp. They utilize REED DT series drill taps and REED D series drill bits, hole cutters, heavy-duty hole cutters, and PVC shell cutters. Drill taps, drill bits, and hole cutters must be purchased separately. NPT adapters also available.

• 3/4" & 1" Tap
• 3/4 - 2" Drill
• Pipe Diameter: 4" - 48" 
• Modular design allows fast and simple conversion back and forth from tapping to drilling machine.
• Quick clamp feed mechanism requires little adjustment, saving time for the operator.
• Compact design requires less digging as radius = 32” which is less than competitor models.

09314 CDTM2100 Kit includes:

Item Code   Description
99309         Boring Bar Assembly
99300         Threaded Body
98430         Top Chamber Assembly
99305         Feed Assembly
40383         13/16” Female Drive Ratchet Wrench
40417         Steel Toolbox
98425         Tapping Compound
98417         5 ft. Chain
40369         Chain Hook
40372         Saddle Gasket
40371         Saddle Ring Gasket
40405         5/8" Combination Wrench
98423         3/4" Corporation Insertion Tool
98424         1" Corporation Insertion Tool
98422         Adapter Shank
98411         Bearing Sleeve
98412         Knockout Pin
08423         3/4" Corp Adapter
08424         1" Corp Adapter
98461         3/4" Drill Adapter
98462         1" Drill Adapter
99304         DM Boring Bar
02205         CW10 10" Adj. Wrench
40396         1/2" Ball Valve
97564         1/2" Nipple
08413         Hole Saw Adapter
08425         1½” AWWA Corp Adapter
08426         2” AWWA Corp Adapter
99308         3/32 Hex Key
94150          PVC Drill Adapter
02112          RSPUD Spud Wrench

DM2100 drilling machine has the base and accessories to work for AWWA threads up to 2”.

• Size: 3/4" - 2" AWWA
• Drilling Machine unit alone weighs 13.2 lbs
• Drilling Machines have a quick clamp feed mechanism requiring little adjustment.
• These machines are more compact, thus requiring less clearance than other models.
• Modular design allows fast and simple conversion to direct tapping machine.

09312 DM2100 Drilling Machine Kit includes:

09301   DM2100B BASE MACHINE in Carrying Case
04561   HSPD 1/4" PILOT DRILL BIT
08413   DMHSA HOLE SAW ADAPTER
08423   DMCA75 3/4" CORPORATION ADAPTER
08424   DMCA100 1" CORPORATION ADAPTER
08425   DMCA150 1 1/2" AWWA CORPORATION ADAPTER
08426   DMCA200 2" AWWA CORPORATION ADAPTER
98461   DMDA75 3" EXTENSION for D688 DRILL BIT
98462   DMDA100 3" EXTENSION for D875 or D938 DRILL BIT

REED's Direct Tapping Machine is used to drill and tap water mains while under pressure, then to install 3/4'' or 1'' corporation stops in a 2-step operation.

It covers a range of 4'' - 48'' cast or ductile iron and C900 PVC with the use of saddles and chain extensions (saddles sold separately).

The TM1100 tapping machine features a flip clamp feed system. Anodized and epoxy-painted aluminum frames provide a lightweight yet sturdy machine for tough in-ditch applications.

The swing valve allows easy change-out from drill tap to corporation insertion tool without main shutdown. Tapping machine uses REED DT and DTP series drill taps.

• Drill and tap water mains while they remain under pressure.
• Lightweight yet strong, corrosion-resistant aluminum frames are easy to carry and set-up.
• Pressure relieving valve allows for a one-step operation making it simple to use.
• Modular design allows fast and simple conversion to drilling machine.

• Add power to your drilling and tapping, and save hours of hand-cranking.
• Adapter features a 13/16” square drive.
• For power tapping, the TMPDA fits the standard, 13/16” boring bar on REED® TM1100, DM2100, DM1100 machines and Mueller® B101 drilling and tapping machines.
• Fits power drives from REED®, Milwaukee®, DeWalt® and Ridgid® which allows double-duty to power tap/drilling machines.
• Adapter only; operator to provide power drive and tapping/drilling machine.

• Sturdy case with foam insert to fit the digital counter of the Reed Valve Operator.
• Insert cut-outs protect the digital counter and clutch, both sold separately.

• Used for valve exercising with portable power drive.
• Drive socket accepts 1” square shafts, including REED Valve Keys.
• Safety first as utility clutch has over torque protection.
• Factory set torque of 150 lb-ft (203 Nm) with adjustable torque limits of 7 to 204 lb-ft (10-277 Nm).
• Fits REED 700PD power drive, along with RIDGID® 700, Milwaukee® M18™ pipe threader and DeWalt® FLEXVOLT® 60V cordless pipe threader.
• Mechanism is permanently lubricated and sealed for continued clutch performance.
• Add the Digital Counter accessory to record the number of revolutions.