Duplex pump system detects oil and water allowing for diversion of oil to a separate tank via dedicated oil and water pumps. For use in elevator pits, vaults and other areas requiring the control of oil discharge from sump water.
Features
Pumps available in 1/2 hp, 3/4 hp and 6/10 hp
Flow rates to 95 GPM and heads to 65' (depending on model)
Single and three-phase pump models available
Complete system ships with control panel, remote alarm, level sensor, junction box with disconnects, 2 reducer couplings, 2 brass check valves and pumps. (Systems with oil holding tank also available!)
OilTector® control features advanced touch screen display and programming
Dry contact outputs for alarm conditions
Preset level sensor for easy installation
Advanced system monitors/verifies the amount of fluid pumped and that it was pumped to the correct location
Controls are available with optional BACnet Gateway for integration with building automation and control systems.
Review Technical Data Sheets for more information.
The ELV-Series sump pumps are designed and approved for safe operation of pumping, alarming and monitoring of elevator sump pits, transformer vaults and other applications where oil and water must be detected. The OilTector® system will activate the pump to remove water from elevator pits in accordance with ASME A17.1, and will provide pumping of only water - even if an oil condition is detected. The OilTector® cycles the pump only in the water range. Oil and other harmful floating substances are not discharged into the environment. An alarm is activated in the event of a high water condition or high oil condition.
Features
Complete packaged system
1/3, 1/2 or 3/4 hp Sump pump
1-1/2" Discharge control
OilTector®
Remote alarm
115 or 230V Models
Easy clamp-mount installation, with plug-in ready wiring
Simplex pump system detects oil and water - allowing for diversion of oil to a separate tank via automatic electronic valves. For use in elevator pits, vaults and other areas requiring the control of oil discharge from sump water.
Features
Pumps available in 1/2 hp, 3/4 hp and 6/10 hp
Flow rates to 95 GPM and heads to 65' (depending on model)
Single and three-phase pump models available
Complete system ships with control panel, remote alarm, level sensor, junction box with disconnects, 2 reducer couplings, brass check valves and pumps. (Systems with oil holding tank also available!)
OilTector® control features advanced touch screen display and programming
Remote alarm can be mounted up to 2,500' from panel
Preset level sensor for easy installation
Advanced system monitors/verifies the amount of fluid pumped and that it was pumped to the correct location
Controls are available with optional BACnet Gateway for integration with building automation and control systems.
Review Technical Data Sheets for more information.
