Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Fits Omnivore LSG-Series Grinder Pumps

• Heavy cast iron construction
• Single guide pipe design with auto align feature
• 1-1/4" guide pipe female NPT
• 1-1/4" discharge female NPT
• Powder coated for corrosion resistance
• Heavy nitrile sealing grommets
• Includes mating flange for LSG-Series pump and upper rail support bracket, stainless steel bolts and sealing grommet (Guide rail pipe not included)

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Liberty Pumps LSG-Series Omnivore® grinders meet the demanding needs of commercial and residential sewage applications where difficult solids handling ability is crucial. The LSG features patented V-Slice® Cutter Technology. This industry-leading design, made of 440 hardened stainless steel, shears rags, jeans, wipes, diapers, sanitary napkins and other debris into a fine slurry. Applications include individual or groups of homes, motels, schools, shopping centers, lakefront developments and systems requiring pressure pumping of waste.

Other features include a one-piece cast iron volute and motor housing, Quick-connect power cord for field serviceability and a 3 year limited warranty from last bill-of-sale.

Complete factory pre-assembled systems are available with multiple basin sizes and control panel options.

• 2 hp.
• 1 1/4" Discharge
• Automatic
• Single Phase 208-230 V
• 25' power cord with Quick-Disconnect
• Piggy back plug with wide angle float

Features

• 2 hp, heavy-duty motor – oil-filled, thermally protected
• Upper and lower ball bearings
• One-piece uni-body cast iron housing
• 300 Series SS rotor shaft
• 316 Stainless-steel impeller
• Dual seals – Upper seal is unitized durable silicon  carbide. Lower seal is Viton® double-lip. (Lower seal ensures that all debris is kept away from upper seal)
• Motor windings insulated to Class B (130°C)
• Advanced V-Slice® Cutter Technology made of hardened 440 stainless steel – Rockwell C 58
• Horizontal 1-1/4" FNPT discharge
• Back vanes on impeller and spiraled bottom plate for  superior solids clearing
• Stainless-steel fasteners
• Clog-free volute design
• Designed for maximum heat dissipation and cool motor  operating temperatures
• Solid state starting circuit - no mechanical relay coil
• Quick-connect 25' power cord
• Piggyback plug with wide-angle float switch (on automatic model) eliminates need for expensive panel Viton® is a registered trademark of DuPont Dow Elastomers LLC.

GR20 Guide Rail Base for LSG-Series pumps - SOLD SEPARATELY

• Cast Iron construction
• Single 1-1/4" guide rail pipe design
• Auto alignment feature
• GR20 works only with LSG-Series pumps
• Upper rail support bracket  

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Liberty Pumps LSG-Series Omnivore® grinders meet the demanding needs of commercial and residential sewage applications where difficult solids handling ability is crucial. The LSG features patented V-Slice® Cutter Technology. This industry-leading design, made of 440 hardened stainless steel, shears rags, jeans, wipes, diapers, sanitary napkins and other debris into a fine slurry. Applications include individual or groups of homes, motels, schools, shopping centers, lakefront developments and systems requiring pressure pumping of waste.

Other features include a one-piece cast iron volute and motor housing, Quick-connect power cord for field serviceability and a 3 year limited warranty from last bill-of-sale.

Complete factory pre-assembled systems are available with multiple basin sizes and control panel options.

• 2 hp.
• 1 1/4" Discharge
• Manual
• Single Phase 208-230 V
• 25' power cord with Quick-Disconnect

Features

• 2 hp, heavy-duty motor – oil-filled, thermally protected
• Upper and lower ball bearings
• One-piece uni-body cast iron housing
• 300 Series SS rotor shaft
• 316 Stainless-steel impeller
• Dual seals – Upper seal is unitized durable silicon  carbide. Lower seal is Viton® double-lip. (Lower seal ensures that all debris is kept away from upper seal)
• Motor windings insulated to Class B (130°C)
• Advanced V-Slice® Cutter Technology made of hardened 440 stainless steel – Rockwell C 58
• Horizontal 1-1/4" FNPT discharge
• Back vanes on impeller and spiraled bottom plate for  superior solids clearing
• Stainless-steel fasteners
• Clog-free volute design
• Designed for maximum heat dissipation and cool motor  operating temperatures
• Solid state starting circuit - no mechanical relay coil
• Quick-connect 25' power cord

GR20 Guide Rail Base for LSG-Series pumps - SOLD SEPARATELY

• Cast Iron construction
• Single 1-1/4" guide rail pipe design
• Auto alignment feature
• GR20 works only with LSG-Series pumps
• Upper rail support bracket  

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Designed for sewage applications. Higher flow rates allow use with 2" discharge lines.

• 1 hp.
• 2" Discharge
• Automatic
• Single Phase 115 V
• 10' cord
• Wide-Angle Float

Features:

• Heavy cast iron construction
• Patented V-Slice® Cutter Technology
• Shreds difficult solids such as feminine products, rags, towels and wipes that can jam a solids handling style pump
• Hardened stainless steel cutter and plate
• Oil-filled, thermally protected motor
• PRG-Series grinders can be used as a replacement pump in 2" discharge systems using LE40 and LE50-Series solids handling pumps*
• Vertical switch model available in 115V (PRG101AV)
• Additional options: 25' Cord, 115V or 230V 1-phase

*Consult factory with actual application and head specifications prior to replacing LE40 and LE50-Series pumps.

Review Specification Sheet for additional information. 

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Designed for sewage applications. Higher flow rates allow use with 2" discharge lines.

• 1 hp.
• 2" Discharge
• Automatic
• Single Phase 230 V
• 10' cord
• Wide-Angle Float

Features:

• Heavy cast iron construction
• Patented V-Slice® Cutter Technology
• Shreds difficult solids such as feminine products, rags, towels and wipes that can jam a solids handling style pump
• Hardened stainless steel cutter and plate
• Oil-filled, thermally protected motor
• PRG-Series grinders can be used as a replacement pump in 2" discharge systems using LE40 and LE50-Series solids handling pumps*
• Vertical switch model available in 115V (PRG101AV)
• Additional options: 25' Cord, 115V or 230V 1-phase

*Consult factory with actual application and head specifications prior to replacing LE40 and LE50-Series pumps.

Review Specification Sheet for additional information. 

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Designed for sewage applications. Higher flow rates allow use with 2" discharge lines.

• 1 hp.
• 2" Discharge
• Manual
• Single Phase 115 V
• 10' cord

Features:

• Heavy cast iron construction
• Patented V-Slice® Cutter Technology
• Shreds difficult solids such as feminine products, rags, towels and wipes that can jam a solids handling style pump
• Hardened stainless steel cutter and plate
• Oil-filled, thermally protected motor
• PRG-Series grinders can be used as a replacement pump in 2" discharge systems using LE40 and LE50-Series solids handling pumps*
• Vertical switch model available in 115V (PRG101AV)
• Additional options: 25' Cord, 115V or 230V 1-phase

*Consult factory with actual application and head specifications prior to replacing LE40 and LE50-Series pumps.

Review Specification Sheet for additional information. 

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Designed for sewage applications. Higher flow rates allow use with 2" discharge lines.

• 1 hp.
• 2" Discharge
• Manual
• Single Phase 230 V
• 10' cord

Features:

• Heavy cast iron construction
• Patented V-Slice® Cutter Technology
• Shreds difficult solids such as feminine products, rags, towels and wipes that can jam a solids handling style pump
• Hardened stainless steel cutter and plate
• Oil-filled, thermally protected motor
• PRG-Series grinders can be used as a replacement pump in 2" discharge systems using LE40 and LE50-Series solids handling pumps*
• Vertical switch model available in 115V (PRG101AV)
• Additional options: 25' Cord, 115V or 230V 1-phase

*Consult factory with actual application and head specifications prior to replacing LE40 and LE50-Series pumps.

Review Specification Sheet for additional information. 

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

The Shark Series® Model BN803 Grinder Pump is designed to remove raw sewage in sewage ejector applications. The professional-grade, 1/2 HP 803 is a time-tested and reliable grinder pump.  The BN803 is a nonautomatic pump equipped with a single piggyback float switch.  The piggyback float switch allows you to set the on and off point of the pump in the field. This is ideal in an application with a deep sump pit or pump tank.

The industry proven “scissor like” Tri-Slice® cutter technology includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1/8″.  The vortex impeller passes the slurry through the pump housing. This combination of features lessens the chance of clogging and downtime.

The Model 803’s motor housing, pump housing, and base are each constructed of cast iron.   The pump’s identification tag, handle, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 803 is able to withstand the most demanding sewage ejector applications.

Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right out of the box.

• Oil-filled motor and cast iron motor housing for optimal heat dissipation which prevents the pump from overheating
• Nonautomatic pump (Piggyback variable level float switch available separately)
• Proven Tri-Slice® cutter technology: Three independent cutting channels provide over 250,000 cuts per minute
• Piggyback float switch eliminates the possibility of water infiltration allowing the float to remain buoyant and functional at all times
• Powder-coated epoxy finish provides corrosion-resistance and extends the life of the pump in harsh environments
• Stainless steel screws, switch arm, guard, handle and hardware to prevent rust and corrosion over the life of the pump
• 100% Factory Tested - every pump is submerged in water and tested at the factory to ensure that it performs as expected when you receive it
• Comes with a 3-year limited warranty giving you protection over your investment and the peace of mind you expect in a quality product
• Horsepower: 1/2 HP
• Voltage: 115 V
• Amps: 7.0
• RPM: 3400
• Discharge: 1-1/4" NPT
• Solids Handling: Slurry
• On/Off Points: Variable level float switch, customer sets
• Impeller Type: Vortex
• Impeller Material: Engineered Plastic
• Cord Length: 15’ (5 m)

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

The Shark Series® Model BN807 Grinder Pump is designed to remove raw sewage in sewage ejector applications. The professional-grade, 1 HP 807 is a time-tested and reliable grinder pump.  The BN807 is a nonautomatic pump equipped with a single piggyback float switch.  The piggyback float switch allows you to set the on and off point of the pump in the field. This is ideal in an application with a deep sump pit or pump tank.

The industry proven “scissor like” Tri-Slice® cutter technology includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1/8″.  The vortex impeller passes the slurry through the pump housing. This combination of features lessens the chance of clogging and downtime.

The Model 807’s motor housing, pump housing, and base are each constructed of cast iron.   The pump’s identification tag, handle, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 807 is able to withstand the most demanding sewage ejector applications.

Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right out of the box.

• Oil-filled motor and cast iron motor housing for optimal heat dissipation which prevents the pump from overheating
• Nonautomatic pump (Piggyback variable level float switch available separately)
• Proven Tri-Slice® cutter technology: Three independent cutting channels provide over 250,000 cuts per minute
• Stainless steel float guard that prevents material or debris from collecting on the float ensuring proper operation every time
• Piggyback float switch eliminates the possibility of water infiltration allowing the float to remain buoyant and functional at all times
• Powder-coated epoxy finish provides corrosion-resistance and extends the life of the pump in harsh environments
• Stainless steel screws, switch arm, guard, handle and hardware to prevent rust and corrosion over the life of the pump
• 100% Factory Tested - every pump is submerged in water and tested at the factory to ensure that it performs as expected when you receive it
• Comes with a 3-year limited warranty giving you protection over your investment and the peace of mind you expect in a quality product
• Horsepower: 1 HP
• Voltage: 115 V
• Phase: 1 Ph
• Amps: 11.0
• Hertz: 60
• RPM: 3400
• Discharge: 1-1/4" NPT
• Solids Handling: Slurry
• On/Off Points: Variable level float switch, customer sets
• Impeller Type: Vortex
• Impeller Material: Engineered Plastic
• Cord Length: 15’ (5 m)

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

The Shark Series® Model M803 Grinder Pump with a is designed to remove raw sewage in sewage ejector applications. The professional-grade, 1/2 HP 803 is a time-tested and reliable grinder pump.  The M803 is a fully automatic float-operated sewage pump.  The white polypropylene float is solid so it cannot become waterlogged.  This ensures that it is always buoyant and able to turn the pump on when necessary.

The industry proven “scissor like” Tri-Slice® cutter technology includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1/8″.  The vortex impeller passed the slurry through the pump housing. This combination of features lessens the chance of clogging and downtime.

The Model 803’s switch case, motor housing, pump housing, and base are each constructed of cast iron.   The pump’s identification tag, float guard, handle, switch arm, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 803 is able to withstand the most demanding sewage ejector applications.

Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right out of the box.

• Oil-filled motor and cast iron motor housing for optimal heat dissipation which prevents the pump from overheating
• Automatic pump with a time-tested, reliable, preset, built-in snap action switch that makes for easy installation
• Proven Tri-Slice® cutter technology: Three independent cutting channels provide over 250,000 cuts per minute
• Stainless steel float guard that prevents material or debris from collecting on the float ensuring proper operation every time
• Solid, buoyant, polypropylene float to eliminate the possibility of water infiltration allowing the float to remain buoyant and functional at all times
• Powder-coated epoxy finish provides corrosion-resistance and extends the life of the pump in harsh environments
• Stainless steel screws, switch arm, guard, handle and hardware to prevent rust and corrosion over the life of the pump
• 100% Factory Tested - every pump is submerged in water and tested at the factory to ensure that it performs as expected when you receive it
• Comes with a 3-year limited warranty giving you protection over your investment and the peace of mind you expect in a quality product
• Horsepower: 1/2 HP
• Voltage: 115 V
• Amps: 7.0
• RPM: 3400
• Discharge: 1-1/4" NPT
• Solids Handling: Slurry
• On/Off Points: 13" (33 cm) / 5-3/4" (14.6 cm)
• Impeller Type: Vortex
• Impeller Material: Engineered Plastic
• Cord Length: 15’ (5 m)

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

The Shark Series® Model M805 Grinder Pump with a is designed to remove raw sewage in sewage ejector applications. The professional-grade, 3/4 HP 805 is a time-tested and reliable grinder pump.  The M805 is a fully automatic float-operated sewage pump.  The white polypropylene float is solid so it cannot become waterlogged.  This ensures that it is always buoyant and able to turn the pump on when necessary.

The industry proven “scissor like” Tri-Slice® cutter technology includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1/8″.  The vortex impeller passed the slurry through the pump housing. This combination of features lessens the chance of clogging and downtime.

The Model 805’s switch case, motor housing, pump housing, and base are each constructed of cast iron.   The pump’s identification tag, float guard, handle, switch arm, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 805 is able to withstand the most demanding sewage ejector applications.

Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right out of the box.

• Oil-filled motor and cast iron motor housing for optimal heat dissipation which prevents the pump from overheating
• Automatic pump with a time-tested, reliable, preset, built-in snap action switch that makes for easy installation
• Proven Tri-Slice® cutter technology: Three independent cutting channels provide over 250,000 cuts per minute
• Stainless steel float guard that prevents material or debris from collecting on the float ensuring proper operation every time
• Solid, buoyant, polypropylene float to eliminate the possibility of water infiltration allowing the float to remain buoyant and functional at all times
• Powder-coated epoxy finish provides corrosion-resistance and extends the life of the pump in harsh environments
• Stainless steel screws, switch arm, guard, handle and hardware to prevent rust and corrosion over the life of the pump
• 100% Factory Tested - every pump is submerged in water and tested at the factory to ensure that it performs as expected when you receive it
• Comes with a 3-year limited warranty giving you protection over your investment and the peace of mind you expect in a quality product
• Horsepower: 3/4 HP
• Voltage: 115 V
• Amps: 9.0
• RPM: 3400
• Discharge: 1-1/4" NPT
• Solids Handling: Slurry
• On/Off Points: 13" (33 cm) / 5-3/4" (14.6 cm)
• Impeller Type: Vortex
• Impeller Material: Engineered Plastic
• Cord Length: 15’ (5 m)

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

The Shark Series® Model M807 Grinder Pump with a is designed to remove raw sewage in sewage ejector applications. The professional-grade, 1 HP 807 is a time-tested and reliable grinder pump.  The M807 is a fully automatic float-operated sewage pump.  The white polypropylene float is solid so it cannot become waterlogged.  This ensures that it is always buoyant and able to turn the pump on when necessary.

The industry proven “scissor like” Tri-Slice® cutter technology includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1/8″.  The vortex impeller passed the slurry through the pump housing. This combination of features lessens the chance of clogging and downtime.

The Model 807’s switch case, motor housing, pump housing, and base are each constructed of cast iron.   The pump’s identification tag, float guard, handle, switch arm, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 807 is able to withstand the most demanding sewage ejector applications.

Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right out of the box.

• Oil-filled motor and cast iron motor housing for optimal heat dissipation which prevents the pump from overheating
• Automatic pump with a time-tested, reliable, preset, built-in snap action switch that makes for easy installation
• Proven Tri-Slice® cutter technology: Three independent cutting channels provide over 250,000 cuts per minute
• Stainless steel float guard that prevents material or debris from collecting on the float ensuring proper operation every time
• Solid, buoyant, polypropylene float to eliminate the possibility of water infiltration allowing the float to remain buoyant and functional at all times
• Powder-coated epoxy finish provides corrosion-resistance and extends the life of the pump in harsh environments
• Stainless steel screws, switch arm, guard, handle and hardware to prevent rust and corrosion over the life of the pump
• 100% Factory Tested - every pump is submerged in water and tested at the factory to ensure that it performs as expected when you receive it
• Comes with a 3-year limited warranty giving you protection over your investment and the peace of mind you expect in a quality product
• Horsepower: 1 HP
• Voltage: 115 V
• Phase: 1Ph
• Amps: 11.0
• RPM: 3400
• Discharge: 1-1/4" NPT
• Solids Handling: Slurry
• On/Off Points: 13" (33 cm) / 5-3/4" (14.6 cm)
• Impeller Type: Vortex
• Impeller Material: Engineered Plastic
• Cord Length: 15’ (5 m)