• Application: ABS; PVC; CPVC; PVDF
•  
• FITS:
• Reed Cutter: TC1Q; TC1.6Q; TC2Q; T10; T15; T20
• Lenox Cutter: 21013-TC25/8
• Blade Exposure: 0.28"  Blade Exposure determines wall thickness capacity of cutter wheel.
• All Reed cutter wheels are made from high shock-resistant tool steel.
• By using this higher quality raw material, Reed cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr.
• Also, because of their higher quality, certified material, only Reed cutter wheels can be heat-treated for the perfect balance between hardness and toughness to make Reed cutter wheels resist breakage and last longer.
• Reed offers the largest cutter wheel line for all types of pipe, tubing and conduit.

Reed pioneered the development of cutter wheels for plastic pipe and today has the widest variety and highest quality cutter wheels for various types and wall thicknesses of plastic pipe and tubing.

• Application: ABS; 3"-6" PVC; 4" Heavy Wall; CPVC
•  
• FITS:
• Reed Cutter: TC3Q; TC4Q; TC5Q; TC6Q
• Rigid Cutter: 30P; 40P; 106; 108; 109P; 133P; 134P; 136P; 154P; 156P 
• Blade Exposure: 0.377"  Blade Exposure determines wall thickness capacity of cutter wheel.
• All Reed cutter wheels are made from high shock-resistant tool steel.
• By using this higher quality raw material, Reed cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr.
• Also, because of their higher quality, certified material, only Reed cutter wheels can be heat-treated for the perfect balance between hardness and toughness to make Reed cutter wheels resist breakage and last longer.
• Reed offers the largest cutter wheel line for all types of pipe, tubing and conduit.

Cut pipe quickly and with minimal digging using REED Low Clearance Rotary™ Cutters.

• The low profile design of these cutters requires only 5” (127 mm) clearance.
• Excellent for cold cuts.
• Pipe snaps off squarely once the operator completes the cut.

• Application:
• Cast or Ductile Iron 
• Pipe Capacity: Cast & Ductile Iron Nominal 10" - 12" 
• Cutter Wheel: RCI8-30
• Length: 61"
• Weight: 50 lbs

Cut pipe quickly and with minimal digging using REED Low Clearance Rotary™ Cutters.

• The low profile design of these cutters requires only 5” (127 mm) clearance.
• Excellent for cold cuts.
• Pipe snaps off squarely once the operator completes the cut.

• Application:
• Steel/Stainless Steel Sch. 40  
• Pipe Capacity: Steel Nominal 10" - 14" 
• Cutter Wheel: RCS8-36
• Length: 61"
• Weight: 50 lbs

Cut pipe quickly and with minimal digging using REED Low Clearance Rotary™ Cutters.

• Cutter is equipped with RCX Cutter Wheels and special RC8-30XR Outboard Rollers. 
• This enables it to cut thicker wall steel and stainless steel pipe as the RCX Cutter Wheel has a .800" (20.3 mm) blade exposure.

• Application:
• Steel/Stainless Steel Sch. 40 & 80
• Pipe Capacity: Steel Nominal 10" - 14" 
• Cutter Wheel: RCX
• Length: 61"
• Weight: 50 lbs

Cut pipe quickly and with minimal digging using REED Low Clearance Rotary™ Cutters.

• The low profile design of these cutters requires only 5” (127 mm) clearance.
• Excellent for cold cuts.
• Pipe snaps off squarely once the operator completes the cut.

• Application:
• Cast or Ductile Iron  
• Pipe Capacity: Cast or Ductile Iron Nominal 14" - 16" 
• Cutter Wheel: RCI8-30
• Length: 66"
• Weight: 60 lbs

Cut pipe quickly and with minimal digging using REED Low Clearance Rotary™ Cutters.

• The low profile design of these cutters requires only 5” (127 mm) clearance.
• Excellent for cold cuts.
• Pipe snaps off squarely once the operator completes the cut.

• Application:
• Steel/Stainless Steel Sch. 40  
• Pipe Capacity: Steel Nominal 16" - 18" 
• Cutter Wheel: RCS8-36
• Length: 66"
• Weight: 60 lbs

Cut pipe quickly and with minimal digging using REED Low Clearance Rotary™ Cutters.

• Cutter is equipped with RCX Cutter Wheels and special RC8-30XR Outboard Rollers. 
• This enables it to cut thicker wall steel and stainless steel pipe as the RCX Cutter Wheel has a .800" (20.3 mm) blade exposure.

• Application:
• Steel/Stainless Steel Sch. 40 & 80
• Pipe Capacity: Steel Nominal 16" - 18" 
• Cutter Wheel: RCX
• Length: 66"
• Weight: 60 lbs

Cut pipe quickly and with minimal digging using REED Low Clearance Rotary™ Cutters.

• Cuts 2 – 4 inch cast iron and ductile iron pipe.
• Change the cutter wheels to use this model to cut steel pipe.
• Features a slip-on handle that is used to both tighten and turn the cutter around the pipe in one direction.
• Only needs 4 inch (102 mm) clearance around the pipe which means these tools cut pipes that other tools cannot reach.
• Heavy-duty, ductile iron frames.

• Application:
• Cast or Ductile Iron  
• Pipe Capacity: Cast or Ductile Iron Nominal 2" - 4" 
• Cutter Wheel: HI4
• Length: 19"
• Weight: 13 lbs

Cut pipe quickly and with minimal digging using REED Low Clearance Rotary™ Cutters.

• Cuts 2 – 4 inch steel pipe.
• Change the cutter wheels to use this model to cut cast iron and ductile iron pipe.
• Features a slip-on handle that is used to both tighten and turn the cutter around the pipe in one direction.
• Only needs 4 inch (102 mm) clearance around the pipe which means these tools cut pipes that other tools cannot reach.
• Heavy-duty, ductile iron frames.

• Application:
• Steel/Stainless Steel Sch. 40  
• Pipe Capacity: Steel Nominal 2" - 4" 
• Cutter Wheel: HS4
• Length: 19"
• Weight: 13 lbs

Cut pipe quickly and with minimal digging using REED Low Clearance Rotary™ Cutters. 

• Cuts 2 – 4 inch steel/stainless pipe, schedules 40 and 80.
• Change the cutter wheels to use this model to cut cast iron and ductile iron pipe.
• Features a slip-on handle that is used to both tighten and turn the cutter around the pipe in one direction.
• Only needs 4 inch (102 mm) clearance around the pipe which means these tools cut pipes that other tools cannot reach.
• Heavy-duty, ductile iron frames.

• Application:
• Steel/Stainless Steel Sch. 40 & 80  
• Pipe Capacity: Steel Nominal 2" - 4" 
• Cutter Wheel: HX4
• Length: 19"
• Weight: 13 lbs

Cut pipe quickly and with minimal digging using REED Low Clearance Rotary™ Cutters.

• The low profile design of these cutters requires only 5” (127 mm) clearance.
• Excellent for cold cuts.
• Pipe snaps off squarely once the operator completes the cut.

• Application:
• Cast or Ductile Iron  
• Pipe Capacity: Cast or Ductile Iron Nominal 6" - 8" 
• Cutter Wheel: RCI8-30
• Length: 58"
• Weight: 43 lbs