Septic Systems

PURCHASE FROM OUR STORE

4

4" HDPE Triplewall Perforated Septic Pipe 3 Hole

  • SKU: 4TWPERF3H
  • Brand:

  • Product Description:

    Triplewall pipe is a three layer high density polyethylene sewer & drain pipe. Consisting of a white exterior and black interior.

    • Conforms to ASTM F810 specifications
    • Joining System: Welded Bell
    • Length: 10'
    • Perforations: 5/8" Hole, 3 Rows at 4, 8 & 12 oclock positions

4

4" HDPE Triplewall Solid Pipe

  • SKU: 4TWSOLID
  • Brand:

  • Product Description:

    Triplewall pipe is a three layer high density polyethylene sewer & drain pipe. Consisting of a white exterior and black interior.

    • Conforms to ASTM F810 specifications
    • Joining System: Welded Bell
    • Length: 10'

Infiltrator Adhesive Silicone Riser Sealant

Infiltrator Adhesive Silicone Riser Sealant

  • SKU: ISI-1500
  • Brand:

  • Product Description:

    Used to seal Infiltrator risers and lids.


Infiltrator ATL Pipe (10' Section)

Infiltrator ATL Pipe (10' Section)

  • SKU: ATL-010
  • Brand:

  • Product Description:

    ATL by Infiltrator is a passive advanced treatment leachfield system designed as an environmentally friendly alternative to traditional stone and pipe drainfields. The ATL system is a sand-lined treatment and dispersal leachfield system consisting of 6 components.

    How It Works

    Upon entering the system, septic tank effluent progresses through each component listed below.

    1. 4" diameter pipe
    2. Large-diameter synthetic aggregate
    3. Fine geotextile
    4. Small-diameter synthetic aggregate
    5. Coarse geotextile
    6. 6" thick system sand

    Benefits:

    • Produces Class 1 (EPA Secondary) Treated Effluent
    • A Passive Advanced Treatment Leachfield _ No Moving Parts or Power Required
    • Modules are Quick and Easy to Install
    • Shallow System Maximizes Site Suitability and Reduces Amount of Sand Fill Requirements
    • No venting and sand cover requirements


Infiltrator ATL Pipe (5' Section)

Infiltrator ATL Pipe (5' Section)

  • SKU: ATL-005
  • Brand:

  • Product Description:

    ATL by Infiltrator is a passive advanced treatment leachfield system designed as an environmentally friendly alternative to traditional stone and pipe drainfields. The ATL system is a sand-lined treatment and dispersal leachfield system consisting of 6 components.

    How It Works

    Upon entering the system, septic tank effluent progresses through each component listed below.

    1. 4" diameter pipe
    2. Large-diameter synthetic aggregate
    3. Fine geotextile
    4. Small-diameter synthetic aggregate
    5. Coarse geotextile
    6. 6" thick system sand

    Benefits:

    • Produces Class 1 (EPA Secondary) Treated Effluent
    • A Passive Advanced Treatment Leachfield _ No Moving Parts or Power Required
    • Modules are Quick and Easy to Install
    • Shallow System Maximizes Site Suitability and Reduces Amount of Sand Fill Requirements
    • No venting and sand cover requirements


Infiltrator Low Profile All in 1 End Cap

Infiltrator Low Profile All in 1 End Cap

  • SKU: LOWPROALLIN1
  • Brand:

  • Product Description:

    This end cap features pipe cutouts on the right and left column designed to accommodate inspection ports, clean outs, or inlet pipes on either side of the end cap. These pipe locations allow easy access for maintenance and alignment when running pressure pipe through the chamber. The Quick4 Plus™ All-in-One 8 Endcap may be used at either end of a chamber row or can be installed mid-trench for an inspection port, cleanout or inlet/outlet pipe. The mid-trench connection feature allows construction of chamber rows with center feed inletting for easy installation of serial distribution systems. Pipe connection options allow for side, end or top inletting.

    Benefits:

    • May be used at the end of chamber row for an inlet/outlet or can be installed mid-trench
    • Mid-trench connection feature allows center feed inletting of chamber rows
    • Center-feed connection allows for easy installation of serial distribution systems
    • Variable pipe connection options allow for side, end or top inletting
    • Piping drill points are set for gravity or pressure pipe

    Specifications:

    Size
    18"W x 15"L x 8"H
    (46 cm x 38 cm x 20 cm)

    Installed Length
    10.4" (26 cm)

    Invert Height
    3.3" (8 cm), 9" (23 cm)


Infiltrator Low Profile Chamber

Infiltrator Low Profile Chamber

  • SKU: LOWPROCHAMBER
  • Brand:

  • Product Description:

    The Quick4 Plus™ Standard Low Profile (LP) offers maximum strength through its four center structural columns. This chamber can be installed in a 36" wide trench. It is shorter in height than Infiltrator’s other Standard model chambers, allowing for shallow installation. Like the original line of Quick4® chambers, it offers advanced contouring capability with its Contour Swivel Connection™, which permits turns up to 10°, right or left.

    Benefits:

    • Low profile design makes this chamber ideal for shallow applications
    • Reduces imported fill needed for cap and fill systems
    • Four center structural columns offer superior strength
    • Advanced contouring connections
    • Latching mechanism allows for quick installation
    • Four-foot chamber lengths are easy to handle and install
    • Supports wheel loads of 16,000 lbs/axle with 12" of cover

    Specifications:

    Size
    34"W x 53"L x 8"H
    (864 mm x 1346 mm x 203 mm)

    Effective Length
    48" (1219 mm)

    Louver Height
    6.3" (160 mm)

    Storage Capacity
    32 gal (121 L)

    Invert Height
    3.3" (84 mm), 9.6" (244 mm)


Infiltrator Low Profile Flat End Cap

Infiltrator Low Profile Flat End Cap

  • SKU: LOWPROFLATCAP
  • Brand:

  • Product Description:

    For use with the Quick4 Plus™ Low Profile chambers, the Quick4 Plus endcap offers a simple, flat design and allows installation of a pipe from the end of the chamber rows. Piping drill points are set for gravtiy or pressure points.

    Benefits:

    • Simple, flat design
    • Allows installation of a pipe from the end only
    • Piping drill points are set for gravity or pressure pipe

    Specifications:

    Size
    18"W x 7"L x 8"H
    (457 mm x 177 mm x 203 mm)

    Additional Length per Trench
    4.5" (114 mm)

    Invert Height
    3.3" (84 mm)


Infiltrator Quick 4  Standard End Cap

Infiltrator Quick 4 Standard End Cap

  • SKU: QUICK4ENDCAP
  • Brand:

  • Product Description:

    The Quick4 Plus™ All-In-One 12 Endcap may be used at either end of the chamber row for an inlet/outlet or can be installed mid-trench. The mid-trench connection feature allows construction of chamber rows with a center-feed, as an alternative to inletting at the ends of chamber rows. Center-feed connections allow for easy installation of serial distribution systems. Pipe connection options include sides, ends or top.

    Benefits:

    • May be used at the end of chamber row for an inlet/outlet or can be installed mid-trench
    • Mid-trench connection feature allows construction of chamber rows with center feed, as an alternative to inletting at the ends of chamber rows
    • Center-feed connection allows for easy installation of serial distribution systems
    • Pipe connection options include sides, ends or top

    Specifications:

    Size
    33"W x 20.5"L x 13"H
    (838 mm x 520 mm x 330 mm)

    Additional Length per Trench
    18.2" (462 mm)

    Invert Height
    5.3" (134 mm), 8" (203 mm)


Infiltrator Quick 4 Plus Standard Chamber

Infiltrator Quick 4 Plus Standard Chamber

  • SKU: QUICK4CHAMBER
  • Brand:

  • Product Description:

    The Quick4 Plus™ Standard chamber offers maximum strength through its two center structural columns. This chamber can be installed in a 36" wide trench. Like the original line of Quick4® chambers, it offers advanced contouring capability with its Contour Swivel Connection™ which permits turns up to 10°, right or left. It is also available in 4' lengths to provide optimal installation flexibility.

    Benefits:

    • Two center structural columns offer increased stability and superior strength
    • Advanced contouring connections
    • Latching mechanism allows for quick installation
    • Four-foot chamber lengths are easy to handle and install
    • Supports wheel loads of 16,000 lbs/axle with 12" of cover

    Specifications:

    Size
    34"W x 53"L x 12"H
    (864 mm x 1346 mm x 305 mm)

    Effective Length
    48" (1219 mm)

    Louver Height
    8" (203 mm)

    Storage Capacity
    47 gal (178 L)

    Invert Height
    0.6" (15 mm), 5.3" (135 mm),
    8.0" (203 mm), 12.7" (323 mm)


Presby Advanced Enviro-Septic Coupling

Presby Advanced Enviro-Septic Coupling

Presby Advanced Enviro-Septic Offset Adapters

Presby Advanced Enviro-Septic Offset Adapters