shop our products

Liberty Pumps

PURCHASE FROM OUR STORE

Liberty 253 Submersible Sump / Effluent Pump

Liberty 253 Submersible Sump / Effluent Pump

Buy Now!
  • SKU: 253LIBERTY
  • Brand:

  • Product Description:

    Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
    Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
    Delivery only available within Indiana.

    Rugged and dependable heavy-duty cast iron pump with powder coat finish.

    Liberty Pumps "workhorse" sump pump features a unique one-piece cast iron body, quick-connect power cord and three different switch options - including our Vertical Magnetic Float (VMF) design for smaller pits (Model 257).

    With a durable epoxy powder coat finish and vortex-style impeller, Liberty Pumps 250-Series pump is the perfect choice for low-head effluent pumping or basement dewatering.

    • 1/3 hp.
    • 1-1/2" Discharge
    • 1/2" Solids Handling
    • Single Phase 115 V
    • 10' cord
    • Wide-Angle Float switch, Series Plug

    Features

    • Unique one-piece cast body eliminates motor housing seal ring
    • Durable epoxy powder coat finish
    • Vortex style impeller
    • Permanently sealed and lubricated bearings
    • Quick-connect 10' standard power cord allows replacement of cord in seconds without breaking seals to motor (other lengths available)
    • Heavy-duty Vertical Magnetic Float (VMF) on vertical float switch models

     

Liberty 257 Submersible Sump / Effluent Pump

Liberty 257 Submersible Sump / Effluent Pump

Buy Now!
  • SKU: 257LIBERTY
  • Brand:

  • Product Description:

    Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
    Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
    Delivery only available within Indiana.

    Rugged and dependable heavy-duty cast iron pump with powder coat finish.

    Liberty Pumps "workhorse" sump pump features a unique one-piece cast iron body, quick-connect power cord and three different switch options - including our Vertical Magnetic Float (VMF) design for smaller pits (Model 257).

    With a durable epoxy powder coat finish and vortex-style impeller, Liberty Pumps 250-Series pump is the perfect choice for low-head effluent pumping or basement dewatering.

    • 1/3 hp.
    • 1-1/2" Discharge
    • 1/2" Solids Handling
    • Single Phase 115 V
    • 10' cord
    • VMF, Vertical Magnetic Float switch

    Features

    • Unique one-piece cast body eliminates motor housing seal ring
    • Durable epoxy powder coat finish
    • Vortex style impeller
    • Permanently sealed and lubricated bearings
    • Quick-connect 10' standard power cord allows replacement of cord in seconds without breaking seals to motor (other lengths available)
    • Heavy-duty Vertical Magnetic Float (VMF) on vertical float switch models

     

Liberty 260-2 Submersible Utility Pump, 25' Cord

Liberty 260-2 Submersible Utility Pump, 25' Cord

Buy Now!
  • SKU: 260-2LIBERTY
  • Brand:

  • Product Description:

    Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
    Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
    Delivery only available within Indiana.

    1/6 hp Submersible Utility Pump

    • 1/6 hp
    • 2A 115V
    • 25' Cord
    • 3/4" NPT and 3/4" Garden Hose Adapter included

    Features

    • Thermoplastic body resists  impact, stress, and corrosion
    • Self-cleaning trash-type impeller
    • 1/6 hp air cooled PSC motor
    • Shaft seal and lip seal
    • Thermal overload protection
    • Pumps down to 1/8"
    • Completely submersible
    • Removable bottom screen for easy cleaning 

    Applications

    • Pumping pool covers
    • Irrigation
    • Pumping flooded areas

    Dimensional Data

    • Data Weight: 7.5 lbs
    • Height: 9.5" Major
    • Width: 7"

Liberty 283 Submersible Sump / Effluent Pump

Liberty 283 Submersible Sump / Effluent Pump

Buy Now!
  • SKU: 283LIBERTY
  • Brand:

  • Product Description:

    Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
    Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
    Delivery only available within Indiana.

    With a shut-off head of 37 feet and 3/4" solids handling capability, the 280-Series by Liberty Pumps covers a wide-range of low-head to mid-range pump applications. Designed for STEP systems, mound systems, liquid waste transfer and high output sump applications, you can count on the 280-Series to offer superior performance. Designed with Liberty Pumps unique one-piece cast iron body and quick-disconnect cords available in 10' and 25' lengths. 35' and 50' cords available on some models. See literature for specifics. High-output 1/2 hp submersible with rugged cast iron housing.

    • 1/2 hp.
    • 1-1/2" Discharge
    • 3/4" Solids Handling
    • Single Phase 115 V
    • 10' cord
    • Wide-Angle Float Switch, Series Plug

    Features

    • Liberty Pumps unique, one-piece  “Uni-Body” casting
    • Quick-connect 10' standard  power cord allows replacement of  cord in seconds without breaking  seals to motor (other lengths available)
    • Permanently lubricated upper  and lower bearings
    • Oil-filled, hermetically sealed motor  with thermal overload protection
    • Stainless-steel removable bottom screen
    • Stainless-steel rotor shaft
    • Stainless-steel fasteners

     

     

Liberty 331 Portable Transfer Pump, 20' Cord

Liberty 331 Portable Transfer Pump, 20' Cord

Buy Now!
  • SKU: 331LIBERTY
  • Brand:

  • Product Description:

    Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
    Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
    Delivery only available within Indiana.

    The Model 331 by Liberty Pumps is a convenient, easy-to-use portable transfer pump for moving water and other non-flammable liquids from one location to another. Typical applications include general water transfer, pool cover drainage, filling livestock tanks and draining water heaters. The 331 delivers up to 45 psi of pressure and has a maximum head of 105'. Maximum vertical suction  lift is 15'.

    • 1/2 hp
    • 8A 115V
    • Thermally protected motor
    • Maximum Fluid Temperature:135°F 
    • 20' Cord
    • 3/4" Brass Garden Hose Connectors

    Features

    • One-piece cast aluminum pump and motor housing with integral carry handle
    • Durable epoxy powder coat finish
    • 20' Power cord
    • Convenient ON/OFF switch
    • 3/4" Brass garden hose connectors
    • Glass reinforced thermoplastic impeller
    • Permanently lubricated ball bearings
    • Large prime plug with internal funnel design for easy priming
    • Maximum discharge head of 105'
    • Maximum suction lift of 15'
    • Easily replaceable motor brushes
    Motor brushes require replacement approximately every 300 hours of use.

    Applications

    • General Water Transfer
    • Draining Water Heaters
    • Boosting Water Pressure by up to 45 psi
    • Charging Hydronic Floor Systems with Glycol

    Dimensional Data

    • Data Weight: 10.5 lbs
    • Height: 7" Major
    • Width: 4 1/2"
    • Length: 9 3/4"

    NOTE: The Model 331 is not intended for use in wet or damp areas. Motor is not submersible. Not intended to pump chemicals or flammable liquids. 

     

Liberty 404 Low Profile Drain Pump, 1/3 hp

Liberty 404 Low Profile Drain Pump, 1/3 hp

Buy Now!
  • SKU: 404LIBERTY
  • Brand:

  • Product Description:

    Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
    Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
    Delivery only available within Indiana.

    The short profile of Liberty Pumps 404 is specially designed for compact areas and gives you the freedom to install fixtures where gravity drain lines are not available. Our QuickTree® technology provides a separate access cover for easy switch inspection. For gray wastewater applications, the 404 is perfect for laundry tray sinks, bar sinks, washing machines and other basement remodeling projects. The system arrives fully assembled and ready to install. Alarmed models available.

    • 1/3 hp
    • 5.2A 115V
    • Oil-filled
    • Thermally protected
    • 10' Cord
    • Total Basin Capacity: 4.3 gallons

    Features

    • Compact design for tight areas
    • Factory pre-assembled
    • Fully automatic operation
    • QuickTree® technology allows quick inspection and removal of float switch without disconnecting the plumbing
    • Integrally molded rubber gaskets for a superior gas-tight seal
    • Oil-filled, hermetically sealed motor with thermal-overload protection; 10', 3-wire power cord with grounded plug
    • Corrosion-resistant polyolefin basin with molded-in connections
    • Maintenance free, permanently lubricated sealed bearings
    • 3/8" Solids handling
    • Standard alarm and Wi-Fi alarmed  models available

    Applications

    • Bar sinks
    • Laundry trays
    • Dehumidifiers
    • Utility sinks
    • Gray wastewater drainage below gravity lines

    Dimensional Data

    • Data Weight: 13 lbs
    • Height: 11 1/8"
    • Major Width: 13 3/4"

    Maximum fluid temperature 104°F continuous duty, 140°F intermittent duty. Not intended for use with chemicals.

     


Liberty 405 Commercial High Temp Drain Pump, 1/2 hp

Liberty 405 Commercial High Temp Drain Pump, 1/2 hp

Buy Now!
  • SKU: 405LIBERTY
  • Brand:

  • Product Description:

    Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
    Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
    Delivery only available within Indiana.

    Liberty Pumps 405 is a specially designed commercial drain pump built to perform in high-head, high temperature situations. Our QuickTree® Technology provides a separate access cover for easy switch inspection. For gray wastewater applications, the 405 is perfect for laundry trays, multi-compartment sinks, bar sinks, utility sinks, dishwashers and allows you the freedom to install fixtures where gravity drain lines are not available. The system arrives fully assembled and ready to install.

    • 1/2 hp
    • 7.3A 115V
    • 10' Cord
    • Total Basin Capacity: 5.5 gallons

    Features

    • Factory pre-assembled
    • Fully automatic operation
    • QuickTree® technology allows quick inspection and removal of float switch without disconnecting the plumbing
    • Oil-filled motor with thermal-overload protection
    • Corrosion-resistant polyolefin basin with integrally molded rubber gasket for a superior gas-tight seal
    • Maintenance-free, permanently lubricated sealed bearings
    • 10' Power cord with ground plug
    • 3/8" Solids handling
    • 1/2 hp
    • Standard alarm and Wi-Fi alarmed  models available

    Maximum Fluid Temperature

    • 180°F
    • Not intended for use with chemicals.

    Applications

    • Laundry Trays
    • Commercial Sinks
    • Bar Sinks
    • Dishwashers
    • Dehumidifiers
    • Wherever gray wastewater drainage is needed below gravity lines

    Specifically designed for higher head applications such as commercial and industrial buildings.

    Dimensional Data

    • Data Weight: 16 lbs
    • Major Height: 14 1/8"
    • Major Width: 13 3/4"
    • Inlet Height (from bottom of basin): 12-5/8"
    • Total Capacity: 5.5 gallons
    • Inlet Size: 2"
    • Discharge Size: 2"
    • Vent Size: 2"

     


Liberty 406 Compact Drain Pump, 1/6 hp

Liberty 406 Compact Drain Pump, 1/6 hp

Buy Now!
  • SKU: 406LIBERTY
  • Brand:

  • Product Description:

    Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
    Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
    Delivery only available within Indiana.

    Liberty Pumps 406 is a Compact Drain Pump.

    • 1/6 hp
    • 1.7A 115V
    • 9' Cord
    • Air-cooled
    • Thermally Protected

    Features

    • Compact design for tight areas and in cabinets
    • Factory pre-assembled
    • Fully automatic operation
    • Wet-end serviceability with easy to remove motor cartridge
    • Integral check valve at bottom inlet connections
    • Rubber gaskets for a superior gas-tight seal
    • Float switch can be accessed and serviced without disconnecting piping
    • Air-cooled motor with thermal-overload protection
    • 9', 3-wire power cord with grounded plug
    • Corrosion-resistant ABS basin with molded-in connections
    • Maintenance free, permanently lubricated sealed bearings
    • 1/8" Solids handling

    Maximum Fluid Temperature

    • 104°F (40°C) continuous duty
    • 140°F (60°C) intermittent duty (10 seconds on/5 seconds off)

    Applications

    • Bar sinks
    • Laundry trays
    • Dehumidifiers
    • Utility sinks
    • Gray wastewater drainage below gravity lines
    • Showers

    Dimensional Data

    • Data Weight: 13.5 lbs
    • Major Height: 14.1"
    • Major Width: 13.2"

     


Liberty ALM-2 Standard Alarm, Narrow Angle Float Switch, 20' Cord

Liberty ALM-2 Standard Alarm, Narrow Angle Float Switch, 20' Cord

Buy Now!
  • SKU: ALM-2
  • Brand:

  • Product Description:

    Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
    Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
    Delivery only available within Indiana.

    Indoor High Liquid Level Alarm with Wide Angle Float

    For sump, effluent or sewage applications.

    Features:
    • NEMA 1 (indoor)
    • 115V operation with 9 volt battery backup
    • 86 decibel alarm
    • Float switch activated panel with an 88 dB horn and warning light to indicate a high water condition.
    • Easy installation - plugs into a 115V outlet.
    • Float included with a 20' cord, ALM-2-1 available with 10' cord.

Liberty ALM-2-1 Standard Alarm, Narrow Angle Float Switch, 10' Cord

Liberty ALM-2-1 Standard Alarm, Narrow Angle Float Switch, 10' Cord

Buy Now!
  • SKU: ALM-2-1
  • Brand:

  • Product Description:

    Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
    Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
    Delivery only available within Indiana.

    Indoor High Liquid Level Alarm with Wide Angle Float

    For sump, effluent or sewage applications.

    Features:
    • NEMA 1 (indoor)
    • 115V operation with 9 volt battery backup
    • 86 decibel alarm
    • Float switch activated panel with an 88 dB horn and warning light to indicate a high water condition.
    • Easy installation - plugs into a 115V outlet.
    • Float included with a 10' cord, ALM-2 available with 20' cord.

Liberty ALM-230W Alarm, Indoor/Outdoor, Float Switch, 20' Cord

Liberty ALM-230W Alarm, Indoor/Outdoor, Float Switch, 20' Cord

Buy Now!
  • SKU: ALM-230W
  • Brand:

  • Product Description:

    Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
    Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
    Delivery only available within Indiana.

    Indoor/Outdoor High Liquid Level Alarm

    Features:
    • Meets Enclosure Type  3R Standards
    • 230V Operation, direct wire
    • Thermoplastic enclosure
    • Red alarm beacon
    • 82 Decibel horn
    • Alarm Test / Silence switch
    • 20' Float switch cord
    • Includes auxiliary contacts
    • Easy field wiring with removable cover

Liberty ALM-2W Alarm, Indoor/Outdoor, Float Switch, 20' Cord

Liberty ALM-2W Alarm, Indoor/Outdoor, Float Switch, 20' Cord

Buy Now!
  • SKU: ALM-2W
  • Brand:

  • Product Description:

    Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
    Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
    Delivery only available within Indiana.

    Indoor/Outdoor High Liquid Level Alarm

    Features:
    • Meets Enclosure Type  3R Standards
    • 115V Operation, direct wire
    • Thermoplastic enclosure
    • Red alarm beacon
    • 82 Decibel horn
    • Alarm Test / Silence switch
    • 20' Float switch cord
    • Includes auxiliary contacts
    • Easy field wiring with removable cover