Fernco Chemical Couplings provide a flexible and watertight connection on drainage systems that require a high chemical resistance to a wide range of chemicals.  Manufactured to meet specific site requirements, Fernco Chemical Couplings withstand the widest possible range of chemicals, due to the shear band and clamping bands encasing a high-performance elastomeric sleeve with a chemically resistant one-piece Fluoropolymer (FEP) liner and PTFE seals.

FEATURES

• PL: Plastic / CI: Cast Iron / GL: Glass
• Pipe Size: 1 1/2"
• Min./Max pipe OD:  1.73" - 2.09"
• Transitions dissimilar chemical piping and sizes
• Chemical resistant drain system, connects chemical waste piping to chemical waste tanks
• One piece Fluoropolymer liner
• Suitable for above and below ground use
• Max temp: 212°F (consistent), 266° F (intermittent)
• Minimum temperature -50°F 
• 4.3 PSI maximum test pressure

APPLICATIONS

• Connects chemically resistant DWV pipe and  fittings
• Connects drain pipe for: chemistry labs, research  labs, beverage plants, commercial kitchens,  printing, as well as medical, pharmaceutical, pulp, film and chemical facilities
• Custom sizes available upon request

INSTALLATION INSTRUCTIONS

1. Champfer and deburr both pipe ends.
2. Mark the pipes adjacent to the coupling bands.
3. Apply Ten (10) layers of PTFE tape directly over the lines on the pipe.
4. Center the FEP liner over the pipe ends and PTFE tape. 
5. Use a heat gun to shrink the FEP liner to the pipe.
6. Center the coupling and tighten the bands. 
7. Ensure all bands are tightened to 60 inch pound.
8. Test for leaks.

Fernco Chemical Couplings provide a flexible and watertight connection on drainage systems that require a high chemical resistance to a wide range of chemicals.  Manufactured to meet specific site requirements, Fernco Chemical Couplings withstand the widest possible range of chemicals, due to the shear band and clamping bands encasing a high-performance elastomeric sleeve with a chemically resistant one-piece Fluoropolymer (FEP) liner and PTFE seals.

FEATURES

• Pipe Type: CI: Cast Iron / GL: Glass
• Pipe Size: 10"
• Min./Max pipe OD:  9.25" - 10.59"
• Transitions dissimilar chemical piping and sizes
• Chemical resistant drain system, connects chemical waste piping to chemical waste tanks
• One piece Fluoropolymer liner
• Suitable for above and below ground use
• Max temp: 212°F (consistent), 266° F (intermittent)
• Minimum temperature -50°F 
• 4.3 PSI maximum test pressure

APPLICATIONS

• Connects chemically resistant DWV pipe and  fittings
• Connects drain pipe for: chemistry labs, research  labs, beverage plants, commercial kitchens,  printing, as well as medical, pharmaceutical, pulp, film and chemical facilities
• Custom sizes available upon request

INSTALLATION INSTRUCTIONS

1. Champfer and deburr both pipe ends.
2. Mark the pipes adjacent to the coupling bands.
3. Apply Ten (10) layers of PTFE tape directly over the lines on the pipe.
4. Center the FEP liner over the pipe ends and PTFE tape. 
5. Use a heat gun to shrink the FEP liner to the pipe.
6. Center the coupling and tighten the bands. 
7. Ensure all bands are tightened to 60 inch pound.
8. Test for leaks.

Fernco Chemical Couplings provide a flexible and watertight connection on drainage systems that require a high chemical resistance to a wide range of chemicals.  Manufactured to meet specific site requirements, Fernco Chemical Couplings withstand the widest possible range of chemicals, due to the shear band and clamping bands encasing a high-performance elastomeric sleeve with a chemically resistant one-piece Fluoropolymer (FEP) liner and PTFE seals.

FEATURES

• Pipe Type: PL: Plastic / DU: Duriron / DI: Ductile Iron 
  
• Pipe Size: 10"
• Min./Max pipe OD:  10.63" - 12.09"
• Transitions dissimilar chemical piping and sizes
• Chemical resistant drain system, connects chemical waste piping to chemical waste tanks
• One piece Fluoropolymer liner
• Suitable for above and below ground use
• Max temp: 212°F (consistent), 266° F (intermittent)
• Minimum temperature -50°F 
• 4.3 PSI maximum test pressure

APPLICATIONS

• Connects chemically resistant DWV pipe and  fittings
• Connects drain pipe for: chemistry labs, research  labs, beverage plants, commercial kitchens,  printing, as well as medical, pharmaceutical, pulp, film and chemical facilities
• Custom sizes available upon request

INSTALLATION INSTRUCTIONS

1. Champfer and deburr both pipe ends.
2. Mark the pipes adjacent to the coupling bands.
3. Apply Ten (10) layers of PTFE tape directly over the lines on the pipe.
4. Center the FEP liner over the pipe ends and PTFE tape. 
5. Use a heat gun to shrink the FEP liner to the pipe.
6. Center the coupling and tighten the bands. 
7. Ensure all bands are tightened to 60 inch pound.
8. Test for leaks.

Strong. Flexible. Steel Reinforced Universal Coupling. - Connects two pipes having an O.D. range of: 10.50"-12.75"

One coupling per nominal pipe size connects:

• Clay
• Concrete
• Ductile Iron
• Orangeburg
• Asbestos Cement
• Duriron
• Cast Iron
• Steel
• Plastic

*See chart for specific connections  Add Spec Sheet Link

Benefits

• One universal coupling per nominal size connects most pipe materials
• Heavy duty, multi-dimensional, non-shear sewer & drain coupling
• Stabilizes the connection against shear forces
• Complies with the material and performance requirements of ASTM C1173
• Heavy duty corrosion resistant high torque 316 series stainless steel clamps
• Stainless Steel Ribbed Construction
• Available Sizes: 4", 5", 6", 8", 10" & 12"

Fernco Chemical Couplings provide a flexible and watertight connection on drainage systems that require a high chemical resistance to a wide range of chemicals.  Manufactured to meet specific site requirements, Fernco Chemical Couplings withstand the widest possible range of chemicals, due to the shear band and clamping bands encasing a high-performance elastomeric sleeve with a chemically resistant one-piece Fluoropolymer (FEP) liner and PTFE seals.

FEATURES

• Pipe Type: DU: Duriron / DI: Ductile Iron 
• Pipe Size: 12"
• Min./Max pipe OD:  12.75" - 13.50"
• Transitions dissimilar chemical piping and sizes
• Chemical resistant drain system, connects chemical waste piping to chemical waste tanks
• One piece Fluoropolymer liner
• Suitable for above and below ground use
• Max temp: 212°F (consistent), 266° F (intermittent)
• Minimum temperature -50°F 
• 4.3 PSI maximum test pressure

APPLICATIONS

• Connects chemically resistant DWV pipe and  fittings
• Connects drain pipe for: chemistry labs, research  labs, beverage plants, commercial kitchens,  printing, as well as medical, pharmaceutical, pulp, film and chemical facilities
• Custom sizes available upon request

INSTALLATION INSTRUCTIONS (See Brochures & Specification Sheets)

1. Champfer and deburr both pipe ends.
2. Mark the pipes adjacent to the coupling bands.
3. Apply Ten (10) layers of PTFE tape directly over the lines on the pipe.
4. Center the FEP liner over the pipe ends and PTFE tape. 
5. Use a heat gun to shrink the FEP liner to the pipe.
6. Center the coupling and tighten the bands. 
7. Ensure all bands are tightened to 60 inch pound.
8. Test for leaks.

Fernco Chemical Couplings provide a flexible and watertight connection on drainage systems that require a high chemical resistance to a wide range of chemicals.  Manufactured to meet specific site requirements, Fernco Chemical Couplings withstand the widest possible range of chemicals, due to the shear band and clamping bands encasing a high-performance elastomeric sleeve with a chemically resistant one-piece Fluoropolymer (FEP) liner and PTFE seals.

FEATURES

• Pipe Type: PL: Plastic / CI: Cast Iron /  GL: Glass
• Pipe Size: 12"
• Min./Max pipe OD:  12.25" - 12.75"
• Transitions dissimilar chemical piping and sizes
• Chemical resistant drain system, connects chemical waste piping to chemical waste tanks
• One piece Fluoropolymer liner
• Suitable for above and below ground use
• Max temp: 212°F (consistent), 266° F (intermittent)
• Minimum temperature -50°F 
• 4.3 PSI maximum test pressure

APPLICATIONS

• Connects chemically resistant DWV pipe and  fittings
• Connects drain pipe for: chemistry labs, research  labs, beverage plants, commercial kitchens,  printing, as well as medical, pharmaceutical, pulp, film and chemical facilities
• Custom sizes available upon request

INSTALLATION INSTRUCTIONS

1. Champfer and deburr both pipe ends.
2. Mark the pipes adjacent to the coupling bands.
3. Apply Ten (10) layers of PTFE tape directly over the lines on the pipe.
4. Center the FEP liner over the pipe ends and PTFE tape. 
5. Use a heat gun to shrink the FEP liner to the pipe.
6. Center the coupling and tighten the bands. 
7. Ensure all bands are tightened to 60 inch pound.
8. Test for leaks.

Strong. Flexible. Steel Reinforced Universal Coupling. - Connects two pipes having an O.D. range of: 12.50"-15.30"

One coupling per nominal pipe size connects:

• Clay
• Concrete
• Ductile Iron
• Orangeburg
• Asbestos Cement
• Duriron
• Cast Iron
• Steel
• Plastic

*See chart for specific connections  Add Spec Sheet Link

Benefits

• One universal coupling per nominal size connects most pipe materials
• Heavy duty, multi-dimensional, non-shear sewer & drain coupling
• Stabilizes the connection against shear forces
• Complies with the material and performance requirements of ASTM C1173
• Heavy duty corrosion resistant high torque 316 series stainless steel clamps
• Stainless Steel Ribbed Construction
• Available Sizes: 4", 5", 6", 8", 10" & 12"

Fernco Chemical Couplings provide a flexible and watertight connection on drainage systems that require a high chemical resistance to a wide range of chemicals.  Manufactured to meet specific site requirements, Fernco Chemical Couplings withstand the widest possible range of chemicals, due to the shear band and clamping bands encasing a high-performance elastomeric sleeve with a chemically resistant one-piece Fluoropolymer (FEP) liner and PTFE seals.

FEATURES

• Pipe Type: PL: Plastic 
• Pipe Size: 2"
• Min./Max pipe OD:  2.64" - 3.11"
• Transitions dissimilar chemical piping and sizes
• Chemical resistant drain system, connects chemical waste piping to chemical waste tanks
• One piece Fluoropolymer liner
• Suitable for above and below ground use
• Max temp: 212°F (consistent), 266° F (intermittent)
• Minimum temperature -50°F 
• 4.3 PSI maximum test pressure

APPLICATIONS

• Connects chemically resistant DWV pipe and  fittings
• Connects drain pipe for: chemistry labs, research  labs, beverage plants, commercial kitchens,  printing, as well as medical, pharmaceutical, pulp, film and chemical facilities
• Custom sizes available upon request

INSTALLATION INSTRUCTIONS (See Brochures & Specification Sheets)

1. Champfer and deburr both pipe ends.
2. Mark the pipes adjacent to the coupling bands.
3. Apply Ten (10) layers of PTFE tape directly over the lines on the pipe.
4. Center the FEP liner over the pipe ends and PTFE tape. 
5. Use a heat gun to shrink the FEP liner to the pipe.
6. Center the coupling and tighten the bands. 
7. Ensure all bands are tightened to 60 inch pound.
8. Test for leaks.

Fernco Chemical Couplings provide a flexible and watertight connection on drainage systems that require a high chemical resistance to a wide range of chemicals.  Manufactured to meet specific site requirements, Fernco Chemical Couplings withstand the widest possible range of chemicals, due to the shear band and clamping bands encasing a high-performance elastomeric sleeve with a chemically resistant one-piece Fluoropolymer (FEP) liner and PTFE seals.

FEATURES

• Pipe Type: DU: Duriron 
• Pipe Size: 2"
• Min./Max pipe OD:  2.64" - 3.11"
• Transitions dissimilar chemical piping and sizes
• Chemical resistant drain system, connects chemical waste piping to chemical waste tanks
• One piece Fluoropolymer liner
• Suitable for above and below ground use
• Max temp: 212°F (consistent), 266° F (intermittent)
• Minimum temperature -50°F 
• 4.3 PSI maximum test pressure

APPLICATIONS

• Connects chemically resistant DWV pipe and  fittings
• Connects drain pipe for: chemistry labs, research  labs, beverage plants, commercial kitchens,  printing, as well as medical, pharmaceutical, pulp, film and chemical facilities
• Custom sizes available upon request

INSTALLATION INSTRUCTIONS (See Brochures & Specification Sheets)

1. Champfer and deburr both pipe ends.
2. Mark the pipes adjacent to the coupling bands.
3. Apply Ten (10) layers of PTFE tape directly over the lines on the pipe.
4. Center the FEP liner over the pipe ends and PTFE tape. 
5. Use a heat gun to shrink the FEP liner to the pipe.
6. Center the coupling and tighten the bands. 
7. Ensure all bands are tightened to 60 inch pound.
8. Test for leaks.

Fernco Chemical Couplings provide a flexible and watertight connection on drainage systems that require a high chemical resistance to a wide range of chemicals.  Manufactured to meet specific site requirements, Fernco Chemical Couplings withstand the widest possible range of chemicals, due to the shear band and clamping bands encasing a high-performance elastomeric sleeve with a chemically resistant one-piece Fluoropolymer (FEP) liner and PTFE seals.

FEATURES

• Pipe Type: DU: Duriron / DI: Ductile Iron 
• Pipe Size: 3"
• Min./Max pipe OD:  3.54" - 4.29"
• Transitions dissimilar chemical piping and sizes
• Chemical resistant drain system, connects chemical waste piping to chemical waste tanks
• One piece Fluoropolymer liner
• Suitable for above and below ground use
• Max temp: 212°F (consistent), 266° F (intermittent)
• Minimum temperature -50°F 
• 4.3 PSI maximum test pressure

APPLICATIONS

• Connects chemically resistant DWV pipe and  fittings
• Connects drain pipe for: chemistry labs, research  labs, beverage plants, commercial kitchens,  printing, as well as medical, pharmaceutical, pulp, film and chemical facilities
• Custom sizes available upon request

INSTALLATION INSTRUCTIONS (See Brochures & Specification Sheets)

1. Champfer and deburr both pipe ends.
2. Mark the pipes adjacent to the coupling bands.
3. Apply Ten (10) layers of PTFE tape directly over the lines on the pipe.
4. Center the FEP liner over the pipe ends and PTFE tape. 
5. Use a heat gun to shrink the FEP liner to the pipe.
6. Center the coupling and tighten the bands. 
7. Ensure all bands are tightened to 60 inch pound.
8. Test for leaks.

Fernco Chemical Couplings provide a flexible and watertight connection on drainage systems that require a high chemical resistance to a wide range of chemicals.  Manufactured to meet specific site requirements, Fernco Chemical Couplings withstand the widest possible range of chemicals, due to the shear band and clamping bands encasing a high-performance elastomeric sleeve with a chemically resistant one-piece Fluoropolymer (FEP) liner and PTFE seals.

FEATURES

• PL: Plastic / CI: Cast Iron / GL: Glass
• Pipe Size: 3"
• Min./Max pipe OD:  3.15" - 3.50"
• Transitions dissimilar chemical piping and sizes
• Chemical resistant drain system, connects chemical waste piping to chemical waste tanks
• One piece Fluoropolymer liner
• Suitable for above and below ground use
• Max temp: 212°F (consistent), 266° F (intermittent)
• Minimum temperature -50°F 
• 4.3 PSI maximum test pressure

APPLICATIONS

• Connects chemically resistant DWV pipe and  fittings
• Connects drain pipe for: chemistry labs, research  labs, beverage plants, commercial kitchens,  printing, as well as medical, pharmaceutical, pulp, film and chemical facilities
• Custom sizes available upon request

INSTALLATION INSTRUCTIONS

1. Champfer and deburr both pipe ends.
2. Mark the pipes adjacent to the coupling bands.
3. Apply Ten (10) layers of PTFE tape directly over the lines on the pipe.
4. Center the FEP liner over the pipe ends and PTFE tape. 
5. Use a heat gun to shrink the FEP liner to the pipe.
6. Center the coupling and tighten the bands. 
7. Ensure all bands are tightened to 60 inch pound.
8. Test for leaks.

Torque Wrenches for Cast Iron Soil Pipe are engineered to provide recommended torque on No-Hub soil pipe connections/fitting clamps. Torque wrenches can also loosen clamp screws and are designed for hand comfort. Ratcheting action is fast and maximum torque is preset. It releases with a click when reached for secure, leak free joints.

• Ratcheting action is fast and maximum torque is preset.
• Guaranteed accurate to ±10%.
• Hex Size: 3/8"
• Torque: 80 PSI