Liberty ARC18 Access Riser for Pro370 & Pro380 Systems
SKU: ARC18
Brand:
Product Description:
Liberty Pumps new ProSeries Access Riser is a convenient chamber for all your pump's electrical and piping connections-out of sight and below grade. The Access Riser simply slides over the sealed Pro370 or Pro380 system. The cover is retained by 4 stainless steel bolts and features a twist-lock design with provision for padlock to deter unwanted entry.
Optional Installation Kits
Liberty Pumps installation kits provide all the components for a professional installation inside the riser. Kit includes: JB-Series wiring box and hardware, check valve with a disconnect union feature, coupling and elbows (PVC piping not included). Kits available in 2" discharge and vent size only.
The complete system for convenient addition of a bathroom in remodeling projects and additions. Powerful macerating system pumps waste to existing sewer lines in the building or home—*up to 25' high and 150' horizontally. Accepts additional lavatory and tub/shower connections for a complete bathroom anywhere! *Horizontal distance can vary with amount of vertical pumping head. Consult factory for additional sizing and performance information.
Performance
Powerful and quiet, the RazorCutTM system with stainless-steel blades provides superior cutting compared to other macerating toilets.
Appearance
Clean, compact, and modular. The CleanConnect seal system eliminates unsightly rubber couplers for connecting the toilet to the macerator unit. Rear exiting discharge and vent connectors conceal piping when exiting directly to a wall.
Serviceability
Designed with a removable access cover, the AscentTM II is completely serviceable without removing the macerating unit from the toilet or disconnecting plumbing!
Functionality
LEDs inform of power ON, alarm condition, and low battery condition. Touchpad buttons allow manual by-pass operation of the unit and alarm silencing.
Duplex pump system detects oil and water allowing for diversion of oil to a separate tank via dedicated oil and water pumps. For use in elevator pits, vaults and other areas requiring the control of oil discharge from sump water.
Features
Pumps available in 1/2 hp, 3/4 hp and 6/10 hp
Flow rates to 95 GPM and heads to 65' (depending on model)
Single and three-phase pump models available
Complete system ships with control panel, remote alarm, level sensor, junction box with disconnects, 2 reducer couplings, 2 brass check valves and pumps. (Systems with oil holding tank also available!)
OilTector® control features advanced touch screen display and programming
Dry contact outputs for alarm conditions
Preset level sensor for easy installation
Advanced system monitors/verifies the amount of fluid pumped and that it was pumped to the correct location
Controls are available with optional BACnet Gateway for integration with building automation and control systems.
Review Technical Data Sheets for more information.
The ELV-Series sump pumps are designed and approved for safe operation of pumping, alarming and monitoring of elevator sump pits, transformer vaults and other applications where oil and water must be detected. The OilTector® system will activate the pump to remove water from elevator pits in accordance with ASME A17.1, and will provide pumping of only water - even if an oil condition is detected. The OilTector® cycles the pump only in the water range. Oil and other harmful floating substances are not discharged into the environment. An alarm is activated in the event of a high water condition or high oil condition.
Features
Complete packaged system
1/3, 1/2 or 3/4 hp Sump pump
1-1/2" Discharge control
OilTector®
Remote alarm
115 or 230V Models
Easy clamp-mount installation, with plug-in ready wiring
The FL50-Series by Liberty Pumps is a mid-range effluent pump designed for STEP systems, mound systems, liquid waste transfer and higher head de-watering applications. Built of heavy cast iron with an epoxy powder coat finish and stainless steel fasteners, the FL50 will provide years of reliable performance.
1/2 hp.
1-1/2" or 2" Discharge
3/4" Solids Handling
Single Phase 115 V
10' cord
Wide-angle float switch with piggyback plug
Features
Semi-open impeller permits passage of solids without clogging
Heavy-duty iron construction
Stainless steel fasteners
Stainless steel rotor shaft
Permanently lubricated upper and lower ball bearings
Oil-filled hermetically sealed motor with thermal overload protection
Unitized carbon ceramic shaft seal
Dual-sized discharge flange: 1-1/2" or 2"
Quick-connect power cord in 10' standard length (25', 35' and 50' optional lengths available on certain models)
The FL50-Series by Liberty Pumps is a mid-range effluent pump designed for STEP systems, mound systems, liquid waste transfer and higher head de-watering applications. Built of heavy cast iron with an epoxy powder coat finish and stainless steel fasteners, the FL50 will provide years of reliable performance.
1/2 hp.
1-1/2" or 2" Discharge
3/4" Solids Handling
Single Phase 208-230V
10' cord
Wide-angle float switch with piggyback plug
Features
Semi-open impeller permits passage of solids without clogging
Heavy-duty iron construction
Stainless steel fasteners
Stainless steel rotor shaft
Permanently lubricated upper and lower ball bearings
Oil-filled hermetically sealed motor with thermal overload protection
Unitized carbon ceramic shaft seal
Dual-sized discharge flange: 1-1/2" or 2"
Quick-connect power cord in 10' standard length (25', 35' and 50' optional lengths available on certain models)
The FL60-series by Liberty Pumps is a mid-range effluent pump designed for STEP systems, mound systems, liquid waste transfer and higher head de-watering applications. Built of heavy cast iron with an epoxy powder coat finish and stainless steel fasteners, the FL60 will provide years of reliable performance.
6/10 hp.
1-1/2" or 2" Discharge
3/4" Solids Handling
Single Phase 208-230 V
10' cord
Wide-angle float switch with piggyback plug
Features
Semi-open impeller permits passage of solids without clogging (FLH60 has an enclosed impeller)
Heavy cast iron construction
Stainless steel fasteners
416 stainless steel rotor shaft
Permanently lubricated upper and lower ball bearings
Oil-filled hermetically sealed motor with thermal overload protection
Unitized carbon and ceramic shaft seal
Dual-sized discharge flange: 1-1/2" or 2"
Quick-disconnect power cord in 10' standard length (25', 35' and 50' optional lengths available on some models)
Includes mating flange for LSG-Series pump and upper rail support bracket, stainless steel bolts and sealing grommet (Guide rail pipe not included)
Liberty LCU Series Condensate Pumps
SKU: LCUSeries
Brand:
Product Description:
For removal of condensate from high efficiency furnaces, A/C equipment, ice machines, drinking fountains, beverage machines, dehumidifiers, and other applications requiring condensate removal.
