Reed CPBBADP Bosch Plastic Pipe Beveler Adapter Head 04646

Reed CPBBADP Bosch Plastic Pipe Beveler Adapter Head 04646

Reed CPBDADP Dewalt Plastic Pipe Beveler Adapter Head 04648

Reed CPBDADP Dewalt Plastic Pipe Beveler Adapter Head 04648

Reed CPBIDS Beveler Shroud for Reed CPB Beveler 94644

Reed CPBIDS Beveler Shroud for Reed CPB Beveler 94644

  • SKU: CPBIDS
  • Brand:

  • Product Description:

    Beveler Shroud for internal bevel on plastic pipe 2" ID or larger

    • Optional accessory CPBIDS rapidly bevels pipe 2” ID and larger internal diameters.
    • Great solution for deburring the inside of pipe to eliminate snags.
    • Add to CPBKIT exterior beveler kit to add capability of interior diameter bevels.

    NOTE: If pipe is not stationary, a Reed pipe vise is recommended.


Reed CPBMADP Milwaukee Plastic Pipe Beveler Adapter Head 04649

Reed CPBMADP Milwaukee Plastic Pipe Beveler Adapter Head 04649

  • SKU: CPBMADP
  • Brand:

  • Product Description:

    Adapts Milwaukee® die grinder to serve as REED Portable Pipe Beveler

    • Adapt operator's own Milwaukee® die grinder to serve as a plastic pipe beveler for exterior bevels.
    • Operator safety is important and the REED system provides a secure way to cut a consistent bevel quickly.
    • Adjust the bevel length on pipe by choosing the correct router bit RBIT1 1/8" - 5/8" or RBIT2 7/16" - 1"
    • Only tool in the industry that provides a quick, easy and safe way to bevel plastic pipe.
    • Ideal for small to large diameter plastic pipe, including stationary pipe already in the ditch.

    Router Bits RBIT1 and RBIT2 SOLD SEPARATELY

    Power Source Specifications:  (NOT INCLUDED)

    Milwaukee® models 2784-20 and 2784-22 M18™ FUEL 18-Volt Lithium-Ion Brushless Cordless 1/4 in. Die Grinder


Reed CSO1R 3/4

Reed CSO1R 3/4"-1" Copper Shut-off Tool 08201

  • SKU: CSO1R
  • Brand:

  • Product Description:

    Copper Shut-Off Tools are designed to shut-off and reshape Type K service line copper tube. The shut-off tool swings open to go handily around the pipe. Fine threads on the feed screw provide smooth, easy tightening using the ratchet drive handle. The support handle can be positioned in two different spots, depending on where there is clearance. The bottom open area of the shut-off tool is used to reround the copper tube after the repair to allow 70-75% return of flow. Generally there is no noticeable flow difference to the customer after the tube is rerounded. All parts are corrosion protected for long service life. Grease fittings for lubrication maintenance yield long tool life and easy operation.

    • CSO1R shuts-off and reshapes 3/4” – 1” Type K copper tubing.
    • Redesigned with detachable, ratchet drive handle, Reed’s CSO1R stores compactly in its included, heavy-duty case.
    • They are designed only for use on soft copper tube service lines.
    • Support handle can be positioned in two different, perpendicular angles for job demands.
    • Steel castings provide superior tool strength.

Reed CSO2R 1 1/4

Reed CSO2R 1 1/4"-2" Copper Shut-off Tool 08203

  • SKU: CSO2R
  • Brand:

  • Product Description:

    Copper Shut-Off Tools are designed to shut-off and reshape Type K service line copper tube. The shut-off tool swings open to go handily around the pipe. Fine threads on the feed screw provide smooth, easy tightening using the ratchet drive handle. The support handle can be positioned in two different spots, depending on where there is clearance. The bottom open area of the shut-off tool is used to reround the copper tube after the repair to allow 70-75% return of flow. Generally there is no noticeable flow difference to the customer after the tube is rerounded. All parts are corrosion protected for long service life. Grease fittings for lubrication maintenance yield long tool life and easy operation.

    • Shuts-off and reshapes 1 1/4” – 2” Type K copper tubing.
    • Redesigned with detachable, ratchet drive handle, shut-off tools store compactly in a heavy-duty case.
    • Intended only for use on soft copper tube service lines.
    • Support handle can be positioned in two different, perpendicular angles for job demands.
    • Threaded feed screw is zinc-plated for corrosion resistance.
    • Hard anodized, aluminum castings of CSO2R models reduce tool weight and give long service life.

Reed CW10 Grip 10

Reed CW10 Grip 10" Comfort Grip Adjustable Wrench 02910

  • SKU: CW10GRIP
  • Brand:

  • Product Description:

    Use the best adjustable wrenches in new ways: a plastic dip coating gives ergonomic advantages of greater comfort, higher torque, and less fatigue. The plastic grip is also stickier than the steel handle, which combines with the larger diameter to make these wrenches easier to grip while working. Parallel jaw surfaces ensure good grip of nut. 22° 30’ angle allows for closest quarter work on hex nuts.

    • To increase ergonomics, Reed comfort grips are thicker and harder than most.
    • Same precision as Reed's adjustable wrenches with an added grip for more secure handhold.
    • Capacity: 1 1/8" O.D.
    • Length: 10"

    Note: These are comfort grips only. These grips are not made for electrical insulation.


Reed CW12 Grip 12

Reed CW12 Grip 12" Comfort Grip Adjustable Wrench 02912

  • SKU: CW12GRIP
  • Brand:

  • Product Description:

    Use the best adjustable wrenches in new ways: a plastic dip coating gives ergonomic advantages of greater comfort, higher torque, and less fatigue. The plastic grip is also stickier than the steel handle, which combines with the larger diameter to make these wrenches easier to grip while working. Parallel jaw surfaces ensure good grip of nut. 22° 30’ angle allows for closest quarter work on hex nuts.

    • To increase ergonomics, Reed comfort grips are thicker and harder than most.
    • Same precision as Reed's adjustable wrenches with an added grip for more secure handhold.
    • Capacity: 1 5/16" O.D.
    • Length: 12"

    Note: These are comfort grips only. These grips are not made for electrical insulation.


Reed CW6 Grip 6

Reed CW6 Grip 6" Comfort Grip Adjustable Wrench 02906

  • SKU: CW6GRIP
  • Brand:

  • Product Description:

    Use the best adjustable wrenches in new ways: a plastic dip coating gives ergonomic advantages of greater comfort, higher torque, and less fatigue. The plastic grip is also stickier than the steel handle, which combines with the larger diameter to make these wrenches easier to grip while working. Parallel jaw surfaces ensure good grip of nut. 22° 30’ angle allows for closest quarter work on hex nuts.

    • To increase ergonomics, Reed comfort grips are thicker and harder than most.
    • Same precision as Reed's adjustable wrenches with an added grip for more secure handhold.
    • Capacity: 3/4" O.D.
    • Length: 6"

    Note: These are comfort grips only. These grips are not made for electrical insulation.


Reed CW8 Grip 8

Reed CW8 Grip 8" Comfort Grip Adjustable Wrench 02908

  • SKU: CW8GRIP
  • Brand:

  • Product Description:

    Use the best adjustable wrenches in new ways: a plastic dip coating gives ergonomic advantages of greater comfort, higher torque, and less fatigue. The plastic grip is also stickier than the steel handle, which combines with the larger diameter to make these wrenches easier to grip while working. Parallel jaw surfaces ensure good grip of nut. 22° 30’ angle allows for closest quarter work on hex nuts.

    • To increase ergonomics, Reed comfort grips are thicker and harder than most.
    • Same precision as Reed's adjustable wrenches with an added grip for more secure handhold.
    • Capacity: 7/8" O.D.
    • Length: 8"

    Note: These are comfort grips only. These grips are not made for electrical insulation.


Reed DEB0 Deburring Tool 04434

Reed DEB0 Deburring Tool 04434

  • SKU: DEB0
  • Brand:

  • Product Description:

    DEB0 deburring tools feature a long-lasting, hardened tool steel, deburring blade.

    • Tool deburrs aluminum, copper and steel tubing.
    • Pencil-sized DEB0 has a slim, aluminum handle and handy pocket clip.
    • Blade is permanently attached.

Reed DEB1-2CTS Deburring Tool 04656

Reed DEB1-2CTS Deburring Tool 04656

  • SKU: DEB1-2CTS
  • Brand:

  • Product Description:

    Patented DEB1 tools deburr and chamfer to pipe manufacturers’ standards in seconds. Plastic pipe joints get proper fit from smooth, chamfered ends delivered by DEB1 models.

    • Use for PVC, CPVC, ABS, PE and PP pipe.
    • Pipe Capacity nom. 1-1/4", 1-1/2", 2" O.D.
    • Pipe/Tubing: CTS
    • DEB1 offers knurled grip for slip-resistance and durable aluminum body for longevity.
    • All DEB1 models have internal pipe guides.
    • Knurled grip for slip-resistance.
    • Sharpenable and/or replaceable blade.