Money-saving reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused.

• Reams 3" Sch. 40 PVC, CPVC & ABS Fittings
• Plastic Pipe Fitting Reamers fit into standard ½” drills.
• Shaft Size: 3/8" Hex
• PPR reamers work great for vent lines, drain lines, and water lines.
• Its carbide cutting insert provides a cutting edge on each side.
• Rotate before replacement and receive three bonus cutting edges.
• Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.

NOTE: REED plastic pipe reamers (Clean Ream Extreme® and Clean Ream Plus®) work with North America pipe diameters as they fit specific ID/OD for reaming work.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.

Money-saving reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused.

• Reams 4" Sch. 40 PVC, CPVC & ABS Fittings
• Plastic Pipe Fitting Reamers fit into standard ½” drills.
• Shaft Size: 3/8" Hex
• PPR reamers work great for vent lines, drain lines, and water lines.
• Its carbide cutting insert provides a cutting edge on each side.
• Rotate before replacement and receive three bonus cutting edges.
• Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.

NOTE: REED plastic pipe reamers (Clean Ream Extreme® and Clean Ream Plus®) work with North America pipe diameters as they fit specific ID/OD for reaming work.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.

Money-saving reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused.

• Reams 3/4" Sch. 40 PVC, CPVC & ABS Fittings
• Plastic Pipe Fitting Reamers fit into standard ½” drills.
• Shaft Size: 1/4" Hex
• PPR reamers work great for vent lines, drain lines, and water lines.
• Its carbide cutting insert provides a cutting edge on each side.
• Rotate before replacement and receive three bonus cutting edges.
• Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.

NOTE: REED plastic pipe reamers (Clean Ream Extreme® and Clean Ream Plus®) work with North America pipe diameters as they fit specific ID/OD for reaming work.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.

For hard-to-reach deep well bolts, Reed offers Extended Sockets that are made of tool steel and are impact grade. Use Extended Sockets to tighten hex nuts on repair clamps, mechanical joint fittings, and saddles. Finish on sockets provides corrosion-resistance.

• Extended length, impact grade sockets.
• Perfect for hard-to-reach deep well bolts.
• Drive sockets with a 1/2 inch square drive impact wrench or hand tighten.
• Socket size laser-marked onto socket body.
• Hex Size: 1 1/16"
• Length 6"
• Finish: Zinc and Black Chromate

For hard-to-reach deep well bolts, Reed offers Extended Sockets that are made of tool steel and are impact grade. Use Extended Sockets to tighten hex nuts on repair clamps, mechanical joint fittings, and saddles. Finish on sockets provides corrosion-resistance.

• Extended length, impact grade sockets.
• Perfect for hard-to-reach deep well bolts.
• Drive sockets with a 1/2 inch square drive impact wrench or hand tighten.
• Socket size laser-marked onto socket body.
• Hex Size: 1 1/4"
• Length 6"
• Finish: Zinc and Black Chromate

For hard-to-reach deep well bolts, Reed offers Extended Sockets that are made of tool steel and are impact grade. Use Extended Sockets to tighten hex nuts on repair clamps, mechanical joint fittings, and saddles. Finish on sockets provides corrosion-resistance.

• Extended length, impact grade sockets.
• Perfect for hard-to-reach deep well bolts.
• Drive sockets with a 1/2 inch square drive impact wrench or hand tighten.
• Socket size laser-marked onto socket body.
• Hex Size: 1 1/8"
• Length 6"
• Finish: Zinc and Black Chromate

• Application: ABS; PVC; CPVC; PVDF

• FITS:
• Reed Cutter: TC1Q; TC1.6Q; TC2Q; T10; T15; T20
• Lenox Cutter: 21013-TC25/8

• Blade Exposure: 0.28"  Blade Exposure determines wall thickness capacity of cutter wheel.
• All Reed cutter wheels are made from high shock-resistant tool steel.
• By using this higher quality raw material, Reed cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr.
• Also, because of their higher quality, certified material, only Reed cutter wheels can be heat-treated for the perfect balance between hardness and toughness to make Reed cutter wheels resist breakage and last longer.
• Reed offers the largest cutter wheel line for all types of pipe, tubing and conduit.

Light and strong, the titanium-aluminum alloy handle of the Aluminum Pipe Wrench is heat-treated for maximum strength. Reed aluminum pipe wrenches offer tighter tolerances for a snugger wrench, ”beefier” housing for a stronger wrench, and textured paint for a better grip. Heavy Duty - Straight.

• Light and strong.
• Titanium-aluminum alloy handle of the Aluminum Pipe Wrench is heat-treated for maximum strength.
• Pipe Capacity: 1/8" - 1 1/2" O.D.
• Length: 10"
• Reed aluminum pipe wrench parts are interchangeable with most major U.S. brands (including RIDGID®) of straight, 90 degree offset and end wrenches from 18" - 48".
• Parts available include hook jaw, heel jaw and pin, coil and flat spring, and nut.

With hardened and tempered forged alloy steel handles, phosphorous bronze springs, and a triple-coated nickel-chrome exterior finish, Reed Adjustable Wrenches are constructed of the finest materials available. Parallel jaw surfaces ensure good grip of nut. 22° 30’ angle allows for closest quarter work on hex nuts. Precision-ground jaw slides make for the smoothest action.

• Less slippery handle, blackened.
• Precision-ground jaw slides make for the smoothest action.
• Capacity:  1 1/8" O.D.
• Length: 10"

With hardened and tempered forged alloy steel handles, phosphorous bronze springs, and a triple-coated nickel-chrome exterior finish, Reed Adjustable Wrenches are constructed of the finest materials available. Parallel jaw surfaces ensure good grip of nut. 22° 30’ angle allows for closest quarter work on hex nuts. Precision-ground jaw slides make for the smoothest action. Less slippery handle, lower cost, blackened adjustable wrenches of the same construction are also available.

• Triple-coated, nickel-chrome exterior finish.
• Precision-ground jaw slides make for the smoothest action.
• Capacity: 1 1/8" O.D.
• Length: 10"

Reed Pipe Wrenches are the most popular pipe wrench style. High-tensile ductile iron handle and hardened, alloy steel parts are designed to withstand the heaviest demands. Offset pipe wrenches have similar construction and provide longer swing and better access to hard-to-reach places. Heavy Duty - 45 Offset.

• Offset wrenches provide longer swing and better access to hard-to-reach places.
• Solid steel pin in the heel jaw strengthens Reed's wrenches.
• Pipe Capacity: 1/8" - 1 1/2" O.D.
• Length: 10"
• Reed pipe wrench parts are interchangeable with most major U.S. brands (including RIDGID®) of straight, 90 degree offset and end wrenches from 18" - 48".
• Parts available include hook jaw, heel jaw and pin, coil and flat spring, and nut.

Reed Pipe Wrenches are the most popular pipe wrench style. High-tensile ductile iron handle and hardened, alloy steel parts are designed to withstand the heaviest demands.  New production tooling for the hook jaws produces sharper teeth on the 18”, 24”, and 36” models. This change yields a still better grip for hard oil field pipe. Heavy Duty - Straight.

• Designed to withstand the heaviest demands.
• Solid steel pin in the heel jaw strengthens Reed's wrenches.
• Pipe Capacity: 1/8" - 2" O.D.
• Length: 12"
• Reed pipe wrench parts are interchangeable with most major U.S. brands (including RIDGID®) of straight, 90 degree offset and end wrenches from 18" - 48".
• Parts available include hook jaw, heel jaw and pin, coil and flat spring, and nut.