Adapts Milwaukee® die grinder Model 2939-20 or 2984-20 to serve as REED Portable Pipe Beveler

• Kit includes: CPBMADP Milwaukee® Beveler Adapter & RBIT2 Router Bit 7/16" - 1"
• Adapt operator's own Milwaukee® die grinder Model 2939-20 or 2984-20 to serve as a plastic pipe beveler for exterior bevels.
• Operator safety is important and the REED system provides a secure way to cut a consistent bevel quickly.
• Adjust the bevel length to 1/8" - 5/8" by purchasing router bit RBIT1 SOLD SEPARATELY or in the CPBMADP29-RBIT1
• Only tool in the industry that provides a quick, easy and safe way to bevel plastic pipe.
• Ideal for small to large diameter plastic pipe, including stationary pipe already in the ditch.

Additional Router Bits RBIT1 and RBIT2 SOLD SEPARATELY

Power Source Specifications:  (NOT INCLUDED)

Milwaukee® models 2939-20 and 2984-20 M18 FUEL™ cordless die grinders.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Money-saving reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused.

• Kit with PPR150, PPR200, PPR300, PPR400 in a hard plastic case
• Reams Sch. 40 PVC, CPVC & ABS Fittings
• Plastic Pipe Fitting Reamers fit into standard ½” drills.
• PPR reamers work great for vent lines, drain lines, and water lines.
• Its carbide cutting insert provides a cutting edge on each side.
• Rotate before replacement and receive three bonus cutting edges.
• Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.

NOTE: REED plastic pipe reamers (Clean Ream Extreme® and Clean Ream Plus®) work with North America pipe diameters as they fit specific ID/OD for reaming work.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.

Money-saving reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused.

• Kit with PPR125, PPR150, PPR200, PPR300, PPR400 in a hard plastic case
• Reams Sch. 40 PVC, CPVC & ABS Fittings
• Plastic Pipe Fitting Reamers fit into standard ½” drills.
• PPR reamers work great for vent lines, drain lines, and water lines.
• Its carbide cutting insert provides a cutting edge on each side.
• Rotate before replacement and receive three bonus cutting edges.
• Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.

NOTE: REED plastic pipe reamers (Clean Ream Extreme® and Clean Ream Plus®) work with North America pipe diameters as they fit specific ID/OD for reaming work.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.

Money-saving reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused.

• Kit with PPR75, PPR100, PPR150, PPR200, PPR300, PPR400 in a hard plastic case
• Reams Sch. 40 PVC, CPVC & ABS Fittings
• Plastic Pipe Fitting Reamers fit into standard ½” drills.
• PPR reamers work great for vent lines, drain lines, and water lines.
• Its carbide cutting insert provides a cutting edge on each side.
• Rotate before replacement and receive three bonus cutting edges.
• Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.

NOTE: REED plastic pipe reamers (Clean Ream Extreme® and Clean Ream Plus®) work with North America pipe diameters as they fit specific ID/OD for reaming work.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.

Money-saving reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused.

• Kit with PPR75 (3/4"), PPR100 (1"), PPR125 (1 1/4"), PPR150 (1 1/2"), PPR200 (2"), PPR300 (3"), PPR400 (4") in a hard plastic case
• Reams Sch. 40 PVC, CPVC & ABS Fittings
• Plastic Pipe Fitting Reamers fit into standard ½” drills.
• PPR reamers work great for vent lines, drain lines, and water lines.
• Its carbide cutting insert provides a cutting edge on each side.
• Rotate before replacement and receive three bonus cutting edges.
• Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.

NOTE: REED plastic pipe reamers (Clean Ream Extreme® and Clean Ream Plus®) work with North America pipe diameters as they fit specific ID/OD for reaming work.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.

REED’s plastic pipe saws are specifically designed to cut plastic pipe. The composition of plastic pipe, especially PVC, tends to be very abrasive, hence, saws designed to cut only wood become dull very quickly. It is therefore necessary to make saws with the proper profile, set and hardness to most effectively cut plastic pipe.

• Cuts plastic pipe.
• Convenient, small size fits into toolbox.
• Die cast design of handle on PPS12 and PPS18 makes blade change fast and easy.
• Pipe Capacity: 3" Nominal
• Application: PVC (Thin Wall, Heavy Wall, Sch. 40, Sch. 80, C900), PP, PE, PEX, ABS, Plywood, Sheet Rock
• Blade Length: 12"
• Overall Length: 17"

Reed replacement saw blades revitalize the Plastic Pipe Saws.

• Blade Length: 12"

REED’s plastic pipe saws are specifically designed to cut plastic pipe. The composition of plastic pipe, especially PVC, tends to be very abrasive, hence, saws designed to cut only wood become dull very quickly. It is therefore necessary to make saws with the proper profile, set and hardness to most effectively cut plastic pipe.

• Cuts plastic pipe.
• Convenient, small size fits into toolbox.
• Die cast design of handle on PPS12 and PPS18 makes blade change fast and easy.
• Pipe Capacity: 4" Nominal
• Application:PVC (Thin Wall, Heavy Wall, Sch. 40, Sch. 80, C900), PP, PE, PEX, ABS, Plywood, Sheet Rock
• Blade Length: 18"
• Overall Length: 22"

Reed replacement saw blades revitalize the Plastic Pipe Saws.

• Blade Length: 18"

REED’s plastic pipe saws are specifically designed to cut plastic pipe. The composition of plastic pipe, especially PVC, tends to be very abrasive, hence, saws designed to cut only wood become dull very quickly. It is therefore necessary to make saws with the proper profile, set and hardness to most effectively cut plastic pipe.

• Cuts plastic pipe including C900 and larger diameter plastic such as sewer/wastewater pipe.
• PPS20 and PPS24 feature 11 teeth per inch and a unique pattern create a bite that does not chatter on plastic or wood in the push or pull of the saw blade.
• Ergonomic-designed handle on PPS20 and PPS24 with large radius contours for hand comfort.
• Pipe Capacity: 6" Nominal
• Application: PVC (Thin Wall, Heavy Wall, Sch. 40, Sch. 80, C900), PP, PE, PEX, ABS, Plywood, Sheet Rock
• Blade Length: 20"
• Overall Length: 23"

Reed replacement saw blades revitalize the Plastic Pipe Saws.

• Blade Length: 20"

REED’s plastic pipe saws are specifically designed to cut plastic pipe. The composition of plastic pipe, especially PVC, tends to be very abrasive, hence, saws designed to cut only wood become dull very quickly. It is therefore necessary to make saws with the proper profile, set and hardness to most effectively cut plastic pipe.

• Cuts plastic pipe including C900 and larger diameter plastic such as sewer/wastewater pipe.
• PPS20 and PPS24 feature 11 teeth per inch and a unique pattern create a bite that does not chatter on plastic or wood in the push or pull of the saw blade.
• Ergonomic-designed handle on PPS20 and PPS24 with large radius contours for hand comfort.
• Pipe Capacity: 8" Nominal
• Application: PVC (Thin Wall, Heavy Wall, Sch. 40, Sch. 80, C900), PP, PE, HDPE, PEX, ABS, Plywood, Sheet Rock
• Blade Length: 24"
• Overall Length: 27"