REED’s popular DEB1 Series deburring tools are offered with an integral shaft to allow the operator to use with a drill.

• Integrated shaft for drill power operation.
• Knurled grip for slip-resistance and durable aluminum body for longevity.
• Deburr and chamfer in the same rotation.
• Three sizes of pipe accommodated per tool.
• Pipe Capacity nom: 1/2", 3/4" 1" OD
• Application: PVC, CPVC, PE, ABS and PP.
• Pipe/Tubing: IPS

PDEB250 Chamfers interior diameter or outer diameter of PVC, CPVC, PE, PP, ABS, PEX

• Chamfer pipe and have it ready for glue in seconds.
• Cone shape chamfers full range of ¾” - 2 ½” nominal plastic pipe sizes.
• Power or manual operation possible due to removeable shaft.
• Works great for PE water service lines.

PDEB250B - Replacement Blades for PDEB250 Cone Chamfer Tool

• Blade with bevel edge for best performance fits REED PDEB250 deburring tool.
• Pack of two allows user to replace both blades at one time.

PE Water Service Shut-Off Tool is designed for emergency shut-off of PE water services.

• Front end of shut-off tool features a snap hinge device that can be taken apart quickly to allow work in confined areas.
• Knurled grip catches and holds the pipe.
• Open end has latch to hold tool closed until the repair is made.
• “One size fits all” emergency shut-off tool squeezes shut PE water lines.
• Shut-Off tool is zinc plated for corrosion resistance.
• Pipe Capacity: 3/4" - 1"
• Length: 20.5"

Static grounding devices provide a path to ground for any static charge. Because static can build up on plastic pipe, even for water services, there is a possibility of a spark discharge of sufficient energy to cause ignition if the proper air/gas mixture is present.

Use of a static electricity grounding device is a precaution that can dissipate the charge and minimize the possibility of ignition. REED strongly recommends use of the PEGR7 model with PE Squeeze-Off Tools and Guillotine Pipe Cutters. 

• Heavy-duty design holds up to field use demands.
• Ground the work area to increase operator safety.
• Heavy-duty cable with 7 foot working distance.
• Set screw lugs enable cable repair by operator.

Adapts DeWalt® die grinder to serve as REED Portable Pipe Beveler

• Kit includes: CPBDADP Dewalt Beveler Adapter & RBIT1 Router Bit 1/8" - 5/8"
• Adapt operator's own DeWalt® die grinder to serve as a plastic pipe beveler for exterior bevels.
• Operator safety is important and the REED system provides a secure way to cut a consistent bevel quickly.
• Adjust the bevel length to 7/16" - 1" by purchasing router bit RBIT2 SOLD SEPARATELY or in the CPBDADP-RBIT2
• Only tool in the industry that provides a quick, easy and safe way to bevel plastic pipe.
• Ideal for small to large diameter plastic pipe, including stationary pipe already in the ditch.

Additional Router Bits RBIT1 and RBIT2 SOLD SEPARATELY

Power Source Specifications:  (NOT INCLUDED)

DeWalt® model DCG426B 20-Volt MAX XR Lithium-Ion Cordless Brushless Variable Speed Die Grinder

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Adapts DeWalt® die grinder to serve as REED Portable Pipe Beveler

• Kit includes: CPBDADP Dewalt Beveler Adapter & RBIT2 Router Bit 7/16" - 1"
• Adapt operator's own DeWalt® die grinder to serve as a plastic pipe beveler for exterior bevels.
• Operator safety is important and the REED system provides a secure way to cut a consistent bevel quickly.
• Adjust the bevel length to 1/8" - 5/8" by purchasing router bit RBIT1 SOLD SEPARATELY or in the CPBDADP-RBIT1
• Only tool in the industry that provides a quick, easy and safe way to bevel plastic pipe.
• Ideal for small to large diameter plastic pipe, including stationary pipe already in the ditch.

Additional Router Bits RBIT1 and RBIT2 SOLD SEPARATELY

Power Source Specifications:  (NOT INCLUDED)

DeWalt® model DCG426B 20-Volt MAX XR Lithium-Ion Cordless Brushless Variable Speed Die Grinder

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Adapts Milwaukee® die grinder Model 2784-20 or 2784-22 to serve as REED Portable Pipe Beveler

• Kit includes: CPBMADP Milwaukee® Beveler Adapter & RBIT1 Router Bit 1/8" - 5/8"
• Adapt operator's own Milwaukee® die grinder Model 2784-20 or 2784-22 to serve as a plastic pipe beveler for exterior bevels.
• Operator safety is important and the REED system provides a secure way to cut a consistent bevel quickly.
• Adjust the bevel length to 7/16" - 1" by purchasing router bit RBIT2 SOLD SEPARATELY or in the CPBMADP-RBIT2
• Only tool in the industry that provides a quick, easy and safe way to bevel plastic pipe.
• Ideal for small to large diameter plastic pipe, including stationary pipe already in the ditch.

Additional Router Bits RBIT1 and RBIT2 SOLD SEPARATELY

Power Source Specifications:  (NOT INCLUDED)

Milwaukee® models 2784-20 and 2784-22 M18™ FUEL 18-Volt Lithium-Ion Brushless Cordless 1/4 in. Die Grinder

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Adapts Milwaukee® die grinder Model 2939-20 or 2984-20 to serve as REED Portable Pipe Beveler

• Kit includes: CPBMADP Milwaukee® Beveler Adapter & RBIT1 Router Bit 1/8" - 5/8"
• Adapt operator's own Milwaukee® die grinder Model 2939-20 or 2984-20 to serve as a plastic pipe beveler for exterior bevels.
• Operator safety is important and the REED system provides a secure way to cut a consistent bevel quickly.
• Adjust the bevel length to 7/16" - 1" by purchasing router bit RBIT2 SOLD SEPARATELY or in the CPBMADP29-RBIT2
• Only tool in the industry that provides a quick, easy and safe way to bevel plastic pipe.
• Ideal for small to large diameter plastic pipe, including stationary pipe already in the ditch.

Additional Router Bits RBIT1 and RBIT2 SOLD SEPARATELY

Power Source Specifications:  (NOT INCLUDED)

Milwaukee® models 2939-20 and 2984-20 M18 FUEL™ cordless die grinders.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Adapts Milwaukee® die grinder Model 2784-20 or 2784-22 to serve as REED Portable Pipe Beveler

• Kit includes: CPBMADP Milwaukee® Beveler Adapter & RBIT2 Router Bit 7/16" - 1"
• Adapt operator's own Milwaukee® die grinder Model 2784-20 or 2784-22 to serve as a plastic pipe beveler for exterior bevels.
• Operator safety is important and the REED system provides a secure way to cut a consistent bevel quickly.
• Adjust the bevel length to 1/8" - 5/8" by purchasing router bit RBIT1 SOLD SEPARATELY or in the CPBMADP-RBIT1
• Only tool in the industry that provides a quick, easy and safe way to bevel plastic pipe.
• Ideal for small to large diameter plastic pipe, including stationary pipe already in the ditch.

Additional Router Bits RBIT1 and RBIT2 SOLD SEPARATELY

Power Source Specifications:  (NOT INCLUDED)

Milwaukee® models 2784-20 and 2784-22 M18™ FUEL 18-Volt Lithium-Ion Brushless Cordless 1/4 in. Die Grinder

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Adapts Milwaukee® die grinder Model 2939-20 or 2984-20 to serve as REED Portable Pipe Beveler

• Kit includes: CPBMADP Milwaukee® Beveler Adapter & RBIT2 Router Bit 7/16" - 1"
• Adapt operator's own Milwaukee® die grinder Model 2939-20 or 2984-20 to serve as a plastic pipe beveler for exterior bevels.
• Operator safety is important and the REED system provides a secure way to cut a consistent bevel quickly.
• Adjust the bevel length to 1/8" - 5/8" by purchasing router bit RBIT1 SOLD SEPARATELY or in the CPBMADP29-RBIT1
• Only tool in the industry that provides a quick, easy and safe way to bevel plastic pipe.
• Ideal for small to large diameter plastic pipe, including stationary pipe already in the ditch.

Additional Router Bits RBIT1 and RBIT2 SOLD SEPARATELY

Power Source Specifications:  (NOT INCLUDED)

Milwaukee® models 2939-20 and 2984-20 M18 FUEL™ cordless die grinders.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Money-saving reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused.

• Kit with PPR150, PPR200, PPR300, PPR400 in a hard plastic case
• Reams Sch. 40 PVC, CPVC & ABS Fittings
• Plastic Pipe Fitting Reamers fit into standard ½” drills.
• PPR reamers work great for vent lines, drain lines, and water lines.
• Its carbide cutting insert provides a cutting edge on each side.
• Rotate before replacement and receive three bonus cutting edges.
• Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.

NOTE: REED plastic pipe reamers (Clean Ream Extreme® and Clean Ream Plus®) work with North America pipe diameters as they fit specific ID/OD for reaming work.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.