Money-saving reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused.

• Reams 1 1/4" Sch. 40 PVC, CPVC & ABS Fittings
• Plastic Pipe Fitting Reamers fit into standard ½” drills.
• Shaft Size: 3/8" Hex
• PPR reamers work great for vent lines, drain lines, and water lines.
• Its carbide cutting insert provides a cutting edge on each side.
• Rotate before replacement and receive three bonus cutting edges.
• Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.

NOTE: REED plastic pipe reamers (Clean Ream Extreme® and Clean Ream Plus®) work with North America pipe diameters as they fit specific ID/OD for reaming work.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.

Money-saving reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused.

• Reams 1 1/2" Sch. 40 PVC, CPVC & ABS Fittings
• Plastic Pipe Fitting Reamers fit into standard ½” drills.
• Shaft Size: 3/8" Hex
• PPR reamers work great for vent lines, drain lines, and water lines.
• Its carbide cutting insert provides a cutting edge on each side.
• Rotate before replacement and receive three bonus cutting edges.
• Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.

NOTE: REED plastic pipe reamers (Clean Ream Extreme® and Clean Ream Plus®) work with North America pipe diameters as they fit specific ID/OD for reaming work.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.

Money-saving reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused.

• Reams 2" Sch. 40 PVC, CPVC & ABS Fittings
• Plastic Pipe Fitting Reamers fit into standard ½” drills.
• Shaft Size: 3/8" Hex
• PPR reamers work great for vent lines, drain lines, and water lines.
• Its carbide cutting insert provides a cutting edge on each side.
• Rotate before replacement and receive three bonus cutting edges.
• Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.

NOTE: REED plastic pipe reamers (Clean Ream Extreme® and Clean Ream Plus®) work with North America pipe diameters as they fit specific ID/OD for reaming work.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.

Money-saving reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused.

• These hub savers fit 2 1/2 inch fittings commonly found in commercial pool and spas including water parks, theme parks, therapy pools at rehabilitation centers, colleges and universities.

• Reams 2 1/2" Sch. 40 PVC, CPVC & ABS Fittings
• Plastic Pipe Fitting Reamers fit into standard ½” drills.
• Shaft Size: 3/8" Hex
• PPR reamers work great for vent lines, drain lines, and water lines.
• Its carbide cutting insert provides a cutting edge on each side.
• Rotate before replacement and receive three bonus cutting edges.
• Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.

NOTE: REED plastic pipe reamers (Clean Ream Extreme® and Clean Ream Plus®) work with North America pipe diameters as they fit specific ID/OD for reaming work.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.

Money-saving reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused.

• Reams 3" Sch. 40 PVC, CPVC & ABS Fittings
• Plastic Pipe Fitting Reamers fit into standard ½” drills.
• Shaft Size: 3/8" Hex
• PPR reamers work great for vent lines, drain lines, and water lines.
• Its carbide cutting insert provides a cutting edge on each side.
• Rotate before replacement and receive three bonus cutting edges.
• Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.

NOTE: REED plastic pipe reamers (Clean Ream Extreme® and Clean Ream Plus®) work with North America pipe diameters as they fit specific ID/OD for reaming work.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.

Money-saving reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused.

• Reams 4" Sch. 40 PVC, CPVC & ABS Fittings
• Plastic Pipe Fitting Reamers fit into standard ½” drills.
• Shaft Size: 3/8" Hex
• PPR reamers work great for vent lines, drain lines, and water lines.
• Its carbide cutting insert provides a cutting edge on each side.
• Rotate before replacement and receive three bonus cutting edges.
• Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.

NOTE: REED plastic pipe reamers (Clean Ream Extreme® and Clean Ream Plus®) work with North America pipe diameters as they fit specific ID/OD for reaming work.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.

Money-saving reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused.

• Reams 3/4" Sch. 40 PVC, CPVC & ABS Fittings
• Plastic Pipe Fitting Reamers fit into standard ½” drills.
• Shaft Size: 1/4" Hex
• PPR reamers work great for vent lines, drain lines, and water lines.
• Its carbide cutting insert provides a cutting edge on each side.
• Rotate before replacement and receive three bonus cutting edges.
• Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.

NOTE: REED plastic pipe reamers (Clean Ream Extreme® and Clean Ream Plus®) work with North America pipe diameters as they fit specific ID/OD for reaming work.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.

With precision channels drilled from the tool’s end to its side, Pressure-Relieving Hammer Flares allow flaring even when water is in the service line. Use only on Type K soft copper water service tubing.

To absorb impact shock on striking, it is recommended to only strike the flaring tool with a soft-faced brass hammer like REED's HAM3.

• Suited for flaring Type K copper tubing with water in the service line.
• Make 45-degree flares with pressure relieving hammer flaring tools for copper tubing.
• Hardened and tempered to resist wear.
• Copper Tube Size: 1"
• Length: 7.5"

With precision channels drilled from the tool’s end to its side, Pressure-Relieving Hammer Flares allow flaring even when water is in the service line. Use only on Type K soft copper water service tubing.

To absorb impact shock on striking, it is recommended to only strike the flaring tool with a soft-faced brass hammer like REED's HAM3.

• Suited for flaring Type K copper tubing with water in the service line.
• Make 45-degree flares with pressure relieving hammer flaring tools for copper tubing.
• Hardened and tempered to resist wear.
• Copper Tube Size: 3/4"
• Length: 7.5"

1” RCR1 tools are especially useful when tubing is wet for a solid grip when straightening and fitting up.  The long-handled RCR rerounders are beneficial when extra leverage is needed.

• Take the trouble out of handling copper rolls by using Reed Round It(R) tools for straightening and rerounding.
• Provides the needed leverage to guide tube into position for fit-ups.
• Removes mild kinks, frequently preventing the need to cut out a section and to splice-in a short piece.
• Tools will quickly pay for themselves in material, labor and time savings.
• Copper Tube Size: 1"
• Length: 18"

3/4” RCR34 tools are especially useful when tubing is wet for a solid grip when straightening and fitting up.  The long-handled RCR rerounders are beneficial when extra leverage is needed.

• Take the trouble out of handling copper rolls by using Reed Round It(R) tools for straightening and rerounding.
• Provides the needed leverage to guide tube into position for fit-ups.
• Removes mild kinks, frequently preventing the need to cut out a section and to splice-in a short piece.
• Tools will quickly pay for themselves in material, labor and time savings.
• Copper Tube Size: 3/4"
• Length: 18"

RCR341 tools are especially useful when tubing is wet for a solid grip when straightening and fitting up.  The long-handled RCR rerounders are beneficial when extra leverage is needed.

• Take the trouble out of handling copper rolls by using Reed Round It(R) tools for straightening and rerounding.
• Provides the needed leverage to guide tube into position for fit-ups.
• Removes mild kinks, frequently preventing the need to cut out a section and to splice-in a short piece.
• Tools will quickly pay for themselves in material, labor and time savings.
• Copper Tube Size: 3/4" & 1"
• Length: 18"