Combination Drilling/Tapping Machines are easier to use, save operating time, and are a better value than any other machine. The CDTM models are tapping machines with the necessary components for conversion to drilling machines. The CDTM2100 is a TM1100 with components for converting to a DM2100.  All these combination models feature REED’s flip clamp. They utilize REED DT series drill taps and REED D series drill bits, hole cutters, heavy-duty hole cutters, and PVC shell cutters. Drill taps, drill bits, and hole cutters must be purchased separately. NPT adapters also available.

• 3/4" & 1" 110 Tap Adapters
• 3/4 - 2" Drill
• Pipe Diameter: 4" - 48" 
• Modular design allows fast and simple conversion back and forth from tapping to drilling machine.
• Quick clamp feed mechanism requires little adjustment, saving time for the operator.
• Compact design requires less digging as radius = 32” which is less than competitor models.

09323 CDTM2100110 Kit includes:

Item Code       Description
99309               Boring Bar Assembly
99300               Threaded Body
98430               Top Chamber Assembly
99305               Feed Assembly
40383               13/16” Female Drive Ratchet Wrench
40417               Steel Toolbox
98425               Tapping Compound
98417               5 ft. Chain
40369               Chain Hook
40372               Saddle Gasket
40371               Saddle Ring Gasket
40405               5/8" Combination Wrench
98423               3/4" Corporation Insertion Tool
98424               1" Corporation Insertion Tool
98422               Adapter Shank
98411               Bearing Sleeve
98412               Knockout Pin
08423               3/4" Corp Adapter
08424               1" Corp Adapter
98461               3/4" Drill Adapter
98462               1" Drill Adapter
99304               DM Boring Bar
02205               CW10 10" Adj. Wrench
40396               1/2" Ball Valve
97564               1/2" Nipple
08413               Hole Saw Adapter
08431               1½” Mueller® 110 Comp Corp Adapter
08432               2” Mueller® 110 Comp Corp Adapter 
99308               3/32 Hex Key
94150               PVC Drill Adapter
02112               RSPUD Spud Wrench

Kit with Beveler Adapter, Router Bit, DeWalt® Die Grinder, 2 Batteries and Charger

• Cordless power tool deburrs and bevels plastic pipe quickly.
• The kit includes the CPB adjustable beveler attachment, DeWalt® die grinder, battery and charger.
• Check the baseplate arrow for O.D. or I.D. which points to the direction to rotate the beveler around the pipe.
• Capacity: 2" and up
• Bevel Length RBIT1 - Adjustable 1/8" - 5/8"   (Included in Kit)
• Works exclusively with the DeWalt® 20V cordless die grinder.

For longer Bevel length of 7/16" - 1" order part# RBIT2 (SOLD SEPARATELY)

NOTE: If pipe is not stationary, a Reed pipe vise is recommended.

Bevel Boss™ cordless pipe bevelers quickly and safely bevel 2 inch diameter and larger plastic pipe. The tool's unique design makes REED Bevel Boss™ the only tool in the industry that provides a safe and speedy way to bevel. Cordless pipe beveler trims small to large diameter plastic pipe, including pipe already in the ditch. This lightweight tool significantly reduces prep time by quickly and consistently beveling when doing multiple cuts. These pipe bevelers are used on PVC and CPVC plastic pipe including C900, Corzan® CPVC, Bionax® PVCO (C909) and also ABS. Add bevels on most PVC glued joints and some sizes of bell and gasket joints. Adjustable for bevel length up to 1 inch, the required carbide RBIT1 and RBIT2 cut evenly and efficiently. Battery-powered, this cordless pipe beveler has no fumes! Plus, the guide plate eliminates guesswork about the cut and yields a consistent result. To eliminate damage to the gasket, a pipe bevel is required when installing into a pipe bell. Bevels on cement joints allow for even distribution of solvent cement glue to maximize glue contact area. Always defer to pipe manufacturer specifications for bevel recommendations.

In addition to complete beveling kits, there are Beveler Adapters to fit Milwaukee®, Bosch® or DeWalt® die grinders. Beveler adapters permit temporary conversion of the die grinder to serve as a beveler.

Cordless portable pipe beveler adapts to shape pipe interiors, too. For instance, electrical and utility contractors deburr to make pipe interiors snag-free for running wires. To create internal bevels on plastic pipe or conduit of 2 inch inside diameter (ID) or larger, add the REED beveler shroud with guide plate, CPBIDS. 

Power Source Specifications:

DeWalt® model DCG426B 20-Volt MAX XR Lithium-Ion Cordless Brushless Variable Speed Die Grinder

Kit with Beveler Adapter, Router Bit, DeWalt® Die Grinder and Battery (NO CHARGER)

• Cordless power tool deburrs and bevels plastic pipe quickly.
• The kit includes the CPB adjustable beveler attachment, DeWalt® die grinder and battery.
• Check the baseplate arrow for O.D. or I.D. which points to the direction to rotate the beveler around the pipe.
• Capacity: 2" and up
• Bevel Length RBIT1 - Adjustable 1/8" - 5/8"   (Included in Kit)
• Works exclusively with the DeWalt® 20V cordless die grinder.

For longer Bevel length of 7/16" - 1" order part# RBIT2 (SOLD SEPARATELY)

NOTE: If pipe is not stationary, a Reed pipe vise is recommended.

Bevel Boss™ cordless pipe bevelers quickly and safely bevel 2 inch diameter and larger plastic pipe. The tool's unique design makes REED Bevel Boss™ the only tool in the industry that provides a safe and speedy way to bevel. Cordless pipe beveler trims small to large diameter plastic pipe, including pipe already in the ditch. This lightweight tool significantly reduces prep time by quickly and consistently beveling when doing multiple cuts. These pipe bevelers are used on PVC and CPVC plastic pipe including C900, Corzan® CPVC, Bionax® PVCO (C909) and also ABS. Add bevels on most PVC glued joints and some sizes of bell and gasket joints. Adjustable for bevel length up to 1 inch, the required carbide RBIT1 and RBIT2 cut evenly and efficiently. Battery-powered, this cordless pipe beveler has no fumes! Plus, the guide plate eliminates guesswork about the cut and yields a consistent result. To eliminate damage to the gasket, a pipe bevel is required when installing into a pipe bell. Bevels on cement joints allow for even distribution of solvent cement glue to maximize glue contact area. Always defer to pipe manufacturer specifications for bevel recommendations.

In addition to complete beveling kits, there are Beveler Adapters to fit Milwaukee®, Bosch® or DeWalt® die grinders. Beveler adapters permit temporary conversion of the die grinder to serve as a beveler.

Cordless portable pipe beveler adapts to shape pipe interiors, too. For instance, electrical and utility contractors deburr to make pipe interiors snag-free for running wires. To create internal bevels on plastic pipe or conduit of 2 inch inside diameter (ID) or larger, add the REED beveler shroud with guide plate, CPBIDS. 

Power Source Specifications:

DeWalt® model DCG426B 20-Volt MAX XR Lithium-Ion Cordless Brushless Variable Speed Die Grinder

Kit with Beveler Adapter & DeWalt® Die Grinder.   Bit, Battery and Charger NOT INCLUDED.  For complete kit CPBDK

• Cordless power tool deburrs and bevels plastic pipe quickly.
• Base tool includes beveler adapter and DeWalt® die grinder ONLY.
• Runs on DeWalt® 20V battery, sold separately.
• Add required bit: RBIT1 and RBIT2, choosing from preferred size based on pipe diameter.
• Check the baseplate arrow for O.D. or I.D. which points to the direction to rotate the beveler around the pipe.
• Capacity: 2" and up
• Works exclusively with the DeWalt® 20V cordless die grinder.

NOTE: If pipe is not stationary, a Reed pipe vise is recommended.

Bevel Boss™ cordless pipe bevelers quickly and safely bevel 2 inch diameter and larger plastic pipe. The tool's unique design makes REED Bevel Boss™ the only tool in the industry that provides a safe and speedy way to bevel. Cordless pipe beveler trims small to large diameter plastic pipe, including pipe already in the ditch. This lightweight tool significantly reduces prep time by quickly and consistently beveling when doing multiple cuts. These pipe bevelers are used on PVC and CPVC plastic pipe including C900, Corzan® CPVC, Bionax® PVCO (C909) and also ABS. Add bevels on most PVC glued joints and some sizes of bell and gasket joints. Adjustable for bevel length up to 1 inch, the required carbide RBIT1 and RBIT2 cut evenly and efficiently. Battery-powered, this cordless pipe beveler has no fumes! Plus, the guide plate eliminates guesswork about the cut and yields a consistent result. To eliminate damage to the gasket, a pipe bevel is required when installing into a pipe bell. Bevels on cement joints allow for even distribution of solvent cement glue to maximize glue contact area. Always defer to pipe manufacturer specifications for bevel recommendations.

In addition to complete beveling kits, there are Beveler Adapters to fit Milwaukee®, Bosch® or DeWalt® die grinders. Beveler adapters permit temporary conversion of the die grinder to serve as a beveler.

Cordless portable pipe beveler adapts to shape pipe interiors, too. For instance, electrical and utility contractors deburr to make pipe interiors snag-free for running wires. To create internal bevels on plastic pipe or conduit of 2 inch inside diameter (ID) or larger, add the REED beveler shroud with guide plate, CPBIDS. 

Power Source Specifications:

DeWalt® model DCG426B 20-Volt MAX XR Lithium-Ion Cordless Brushless Variable Speed Die Grinder

Kit with Beveler Adapter, Router Bit, DeWalt® Die Grinder, Battery and Charger

• Cordless power tool deburrs and bevels plastic pipe quickly.
• The kit includes the CPB adjustable beveler attachment, DeWalt® die grinder, battery and charger.
• Check the baseplate arrow for O.D. or I.D. which points to the direction to rotate the beveler around the pipe.
• Capacity: 2" and up
• Bevel Length RBIT1 - Adjustable 1/8" - 5/8"   (Included in Kit)
• Works exclusively with the DeWalt® 20V cordless die grinder.

For longer Bevel length of 7/16" - 1" order part# RBIT2 (SOLD SEPARATELY)

NOTE: If pipe is not stationary, a Reed pipe vise is recommended.

Bevel Boss™ cordless pipe bevelers quickly and safely bevel 2 inch diameter and larger plastic pipe. The tool's unique design makes REED Bevel Boss™ the only tool in the industry that provides a safe and speedy way to bevel. Cordless pipe beveler trims small to large diameter plastic pipe, including pipe already in the ditch. This lightweight tool significantly reduces prep time by quickly and consistently beveling when doing multiple cuts. These pipe bevelers are used on PVC and CPVC plastic pipe including C900, Corzan® CPVC, Bionax® PVCO (C909) and also ABS. Add bevels on most PVC glued joints and some sizes of bell and gasket joints. Adjustable for bevel length up to 1 inch, the required carbide RBIT1 and RBIT2 cut evenly and efficiently. Battery-powered, this cordless pipe beveler has no fumes! Plus, the guide plate eliminates guesswork about the cut and yields a consistent result. To eliminate damage to the gasket, a pipe bevel is required when installing into a pipe bell. Bevels on cement joints allow for even distribution of solvent cement glue to maximize glue contact area. Always defer to pipe manufacturer specifications for bevel recommendations.

In addition to complete beveling kits, there are Beveler Adapters to fit Milwaukee®, Bosch® or DeWalt® die grinders. Beveler adapters permit temporary conversion of the die grinder to serve as a beveler.

Cordless portable pipe beveler adapts to shape pipe interiors, too. For instance, electrical and utility contractors deburr to make pipe interiors snag-free for running wires. To create internal bevels on plastic pipe or conduit of 2 inch inside diameter (ID) or larger, add the REED beveler shroud with guide plate, CPBIDS. 

Power Source Specifications:

DeWalt® model DCG426B 20-Volt MAX XR Lithium-Ion Cordless Brushless Variable Speed Die Grinder

• Add a vacuum to the Bevel Boss® as a convenient solution to suction beveling debris.
• Vacuum box connects to 1 1/4" suction hose to collect plastic chips.

 Time-and-material saving CSR2 Round It® Straightener/Rerounder handles 1 1/2” and 2” K annealed copper. Grips the end of a coil so uncoiling is easy; rerounds oval tubing or mild kinks anywhere along its length so cutter will track and fitting will seal properly. Provides safe grip when flaring, and guides copper into alignment for easier fit-ups.

• Take the trouble out of handling copper rolls by using Reed Round It(R) tools for straightening and rerounding.
• Provides the needed leverage to guide tube into position for fit-ups.
• Removes mild kinks, frequently preventing the need to cut out a section and to splice-in a short piece.
• Tools will quickly pay for themselves in material, labor and time savings.
• Copper Tube Size: 1 1/2" & 2"
• Length: 38"

DM2100 drilling machine has the base and accessories to work for AWWA threads up to 2”.

• Size: 3/4" - 2" AWWA
• Drilling Machine unit alone weighs 13.2 lbs
• Drilling Machines have a quick clamp feed mechanism requiring little adjustment.
• These machines are more compact, thus requiring less clearance than other models.
• Modular design allows fast and simple conversion to direct tapping machine.

09312 DM2100 Drilling Machine Kit includes:

09301   DM2100B BASE MACHINE in Carrying Case
04561   HSPD 1/4" PILOT DRILL BIT
08413   DMHSA HOLE SAW ADAPTER
08423   DMCA75 3/4" CORPORATION ADAPTER
08424   DMCA100 1" CORPORATION ADAPTER
08425   DMCA150 1 1/2" AWWA CORPORATION ADAPTER
08426   DMCA200 2" AWWA CORPORATION ADAPTER
98461   DMDA75 3" EXTENSION for D688 DRILL BIT
98462   DMDA100 3" EXTENSION for D875 or D938 DRILL BIT

DM2100110 drilling machine has the base and accessories to work for 110 Compression up to 2”.

• Size: 3/4" - 2" 110 Compression
• Drilling Machine unit alone weighs 13.2 lbs
• Drilling Machines have a quick clamp feed mechanism requiring little adjustment.
• These machines are more compact, thus requiring less clearance than other models.
• Modular design allows fast and simple conversion to direct tapping machine.

09317 DM2100110 Drilling Machine Kit includes:

09301   DM2100B BASE MACHINE in Carrying Case
04561   HSPD 1/4" PILOT DRILL BIT
08413   DMHSA HOLE SAW ADAPTER
08423   DMCA75 3/4" CORPORATION ADAPTER
08424   DMCA100 1" CORPORATION ADAPTER
08431   DMCA110150 1 1/2" CORPORATION ADAPTER
08432   DMCA110200 2" CORPORATION ADAPTER
98461   DMDA75 3" EXTENSION for D688 DRILL BIT
98462   DMDA100 3" EXTENSION for D875 or D938 DRILL BIT

DM2100NPT drilling machine has the base and accessories to work for NPT threads up to 2”.

• Size: 3/4" - 2" NPT Corp Stops
• Drilling Machine unit alone weighs 13.2 lbs
• Drilling Machines have a quick clamp feed mechanism requiring little adjustment.
• These machines are more compact, thus requiring less clearance than other models.
• Modular design allows fast and simple conversion to direct tapping machine.

Note: Additional boring bar needed for 2" iron body gate valves.

09315 DM2100NPT Drilling Machine Kit includes:

09301   DM2100B BASE MACHINE in Carrying Case
04561   HSPD 1/4" PILOT DRILL BIT
08413   DMHSA HOLE SAW ADAPTER
08423   DMCA75 3/4" CORPORATION ADAPTER
08424   DMCA100 1" CORPORATION ADAPTER
08428   DMCA150NPT 1 1/2" NPT CORPORATION ADAPTER
08429   DMCA200NPT 2" NPT CORPORATION ADAPTER
98472   DM75 CORPORATION ADAPTER CONVERTER NPT-AWWA 3/4" Adapter
98473   DM100 CORPORATION ADAPTER CONVERTER NPT-AWWA 1" Adapter
98481   3/4" DRILL BIT EXTENDER
98482   1" DRILL BIT EXTENDER

DM2100UNIVERSAL drilling machine has the base and accessories to work for AWWA and NPT threads up to 2”.

• Size: 3/4" - 2" AWWA & NPT
• Drilling Machine unit alone weighs 13.2 lbs
• Drilling Machines have a quick clamp feed mechanism requiring little adjustment.
• These machines are more compact, thus requiring less clearance than other models.
• Modular design allows fast and simple conversion to direct tapping machine.

Other Parts impacted: 40396, 40403, 40427, 0461

09321 DM2100UNIVERSAL Drilling Machine Kit includes:

09301   DM2100B BASE MACHINE in Carrying Case
08413   DMHSA HOLE SAW ADAPTER
08423   DMCA75 3/4" CORPORATION ADAPTER
08424   DMCA100 1" CORPORATION ADAPTER
08425   DMCA150 1-1/2" AWWA CORPORATION ADAPTER
08426   DMCA200 2" AWWA CORPORATION ADAPTER
08428   DMCA150NPT 1-1/2" NPT CORPORATION ADAPTER
08429   DMCA200NPT 2" NPT CORPORATION ADAPTER
98461   DMDA75 3" EXTENSION for D688 DRILL BIT
98462   DMDA100 3" EXTENSION for D875 or D938 DRILL BIT
98472   DM75 CORPORATION ADAPTER CONVERTER 3/4" NPT - 3/4" AWWA
98473   DM100 CORPORATION ADAPTER CONVERTER 1" NPT - 1" AWWA
98481   3/4" DRILL BIT EXTENDER
98482   1" DRILL BIT EXTENDER

The PVC/PE Drilling Machine is used to cut through the pipe wall via the corporation stop inserted into the service saddle while under pressure.

The DMPVC drilling machine consists of the base unit and corporation (corp) adapters in a carrying case. PVC/PE shell cutters are sold separately.

• Base unit and corp adapters in a carrying case.
• Drill through the pipe wall while the system is under pressure.
• Steel parts are plated or powder epoxy coated for corrosion resistance
• Size: 3/4" & 1"