Everyone needs a handy cutter (or two) like Reed’s C Cutter. This easy-to-grip cutter easily snaps on to copper tubing for a quick, clean cut.

• Application: K, L & M copper and CTS CPVC
• Pipe Capacity: 1" nominal
• Just turn the cutter in the direction of the arrow and the cut will be complete in seconds.
• Compact c-shape means no handle swing space is required.
• The spring-loaded cutter wheel self-feeds on copper and CTS CPVC with consistent pressure as the tool is turned around the tubing.
• Each cutter fits just one popular size of copper tubing.

Everyone needs a handy cutter (or two) like Reed’s C Cutter. This easy-to-grip cutter easily snaps on to copper tubing for a quick, clean cut.

• Application: Hard M copper, L copper; CTS CPVC
• Kit includes 3 C Cutters - 1/2", 3/4" and 1" nominal
• Just turn the cutter in the direction of the arrow and the cut will be complete in seconds.
• Compact c-shape means no handle swing space is required.
• The spring-loaded cutter wheel self-feeds on Type L, and M copper and CTS CPVC with consistent pressure as the tool is turned around the tubing.
• Each cutter fits just one popular size of copper tubing.

Everyone needs a handy cutter (or two) like Reed’s C Cutter. This easy-to-grip cutter easily snaps on to copper tubing for a quick, clean cut.

• Application: K, L & M copper and CTS CPVC
• Pipe Capacity: 1/2" nominal
• Just turn the cutter in the direction of the arrow and the cut will be complete in seconds.
• Compact c-shape means no handle swing space is required.
• The spring-loaded cutter wheel self-feeds on copper and CTS CPVC with consistent pressure as the tool is turned around the tubing.
• Each cutter fits just one popular size of copper tubing.

Everyone needs a handy cutter (or two) like Reed’s C Cutter. This easy-to-grip cutter easily snaps on to copper tubing for a quick, clean cut.

• Application: K, L & M copper and CTS CPVC
• Pipe Capacity: 3/4" nominal
• Just turn the cutter in the direction of the arrow and the cut will be complete in seconds.
• Compact c-shape means no handle swing space is required.
• The spring-loaded cutter wheel self-feeds on copper and CTS CPVC with consistent pressure as the tool is turned around the tubing.
• Each cutter fits just one popular size of copper tubing.

REED’s Toilet Closet Flange Reamer removes the internal closet flange and saves the sewer pipe for reuse. Clean out the old, damaged toilet flange, install a new one and complete the project in minutes. Engineered to fit a 4” internal flange, the toilet closet flange reamer saves time and material costs for the plumbing project. 

NOTE:  Closet Flanges with a lip or tabs above the 4" outlet require that the lip or tabs be removed before using the Toilet Flange Reamer. 

• Removes toilet flange from inside 4” PVC schedule 40 pipe.
• Eliminate the hassle and labor time of sawing and chiseling out the old closet flange.
• Fits into standard ½” drills.

NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems.

REED's Direct Tapping Machine is used to drill and tap water mains while under pressure, then to install 3/4'' or 1'' corporation stops in a 2-step operation.

It covers a range of 4'' - 48'' cast or ductile iron and C900 PVC with the use of saddles and chain extensions (saddles sold separately).

The TM1100 tapping machine features a flip clamp feed system. Anodized and epoxy-painted aluminum frames provide a lightweight yet sturdy machine for tough in-ditch applications.

The swing valve allows easy change-out from drill tap to corporation insertion tool without main shutdown. Tapping machine uses REED DT and DTP series drill taps.

• Drill and tap water mains while they remain under pressure.
• Lightweight yet strong, corrosion-resistant aluminum frames are easy to carry and set-up.
• Pressure relieving valve allows for a one-step operation making it simple to use.
• Modular design allows fast and simple conversion to drilling machine.

• Add power to your drilling and tapping, and save hours of hand-cranking.
• Adapter features a 13/16” square drive.
• For power tapping, the TMPDA fits the standard, 13/16” boring bar on REED® TM1100, DM2100, DM1100 machines and Mueller® B101 drilling and tapping machines.
• Fits power drives from REED®, Milwaukee®, DeWalt® and Ridgid® which allows double-duty to power tap/drilling machines.
• Adapter only; operator to provide power drive and tapping/drilling machine.

• 16 ounce can with resealable lid.
• New formula as of September 2016.
• Fully synthetic formula holds up well under temperature extremes.
• Formula resists water washout.
• Available in a 6 oz. squeeable bottle TMTC6.

• Squeeze bottle with flip cap facilitates jobsite use.
• New formula as of September 2016.
• Fully synthetic formula holds up well under temperature extremes.
• Formula resists water washout.
• Also available in 16 oz. can TMTC.

The TRC1S, with a single cutting space, ships with 3/8” dies and can be outfitted with optional dies for 1/4” and 5/16” rod.

The TRC1S holds one die set at a time, thus the reason for optional dies.

• Mounting hole in lower handle for a permanent mounting option.
• Heat-treated dies for durability. TRCD14, TRCD516, TRCD38
• Fit the most common threaded rods found in the United States which are 1/4-20 UNC,  5/16-18 UNC,   3/8-16 UNC.
• Comfort grip on upper handle.

TRC2D features two cutting spots for 1/2” or 3/8”. 

Ships with dies for 1/2" and 3/8" threaded rod

• Mounting hole in lower handle for a permanent mounting option.
• Heat-treated dies for durability. TRCD38 & TRCD12
• Fit the most common threaded rods found in the United States which are 1/4-20 UNC,  5/16-18 UNC,   3/8-16 UNC,  1/2-13 UNC.
• Comfort grip on upper handle.

1/2" Dies for Threaded Rod Cutter for TRC2D only.

• Threaded rod cutter replacement dies are heat-treated for strength.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.