This tool is used to prepare PVC, CPVC, ABS and PE type IPS pipe for the gluing of joints.   

The Chamfer Tool attaches to an electric or cordless drill (not included).   

• 3" chamfer tool cuts a 5/32” X 15° chamfer on outside diameter and a small chamfer on the inside diameter.
• The inside blade adjusts to chamfer Schedule 40 or Schedule 80 pipe.
• Features strong, aluminum body and 3/8 inch hex, steel shaft.
• Uses drill power which eliminates user fatigue when making multiple cuts/chamfers.
• Deburrs inside and outside simultaneously, in just seconds.
• Produces smooth, consistent chamfer on plastic pipe, eliminating leaky glue joints that can be caused by improper chamfer.
• Great for vent pipe such as System 636® pipe.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

This tool is used to prepare PVC, CPVC, ABS and PE type IPS pipe for the gluing of joints.   

The Chamfer Tool attaches to an electric or cordless drill (not included).   

• 4" chamfer tool cuts a 5/32” X 15° chamfer on outside diameter and a small chamfer on the inside diameter.
• The inside blade adjusts to chamfer Schedule 40 or Schedule 80 pipe.
• Features strong, aluminum body and 3/8 inch hex, steel shaft.
• Uses drill power which eliminates user fatigue when making multiple cuts/chamfers.
• Deburrs inside and outside simultaneously, in just seconds.
• Produces smooth, consistent chamfer on plastic pipe, eliminating leaky glue joints that can be caused by improper chamfer.
• Great for vent pipe such as System 636® pipe.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

This tool is used to prepare PVC, CPVC, ABS and PE type IPS pipe for the gluing of joints.   

The Chamfer Tool attaches to an electric or cordless drill (not included).   

• Kit includes 2", 3" & 4" chamfer tools with case for solvent connections. 
• Chamfer tool cuts a 1/8” X 15° chamfer on outside diameter of 2” pipe and 5/32” X 15° on 3” and 4” diameter pipe and a small chamfer on the inside diameter.
• The inside blade adjusts to chamfer Schedule 40 or Schedule 80 pipe.
• Features strong, aluminum body and 3/8 inch hex, steel shaft.
• Uses drill power which eliminates user fatigue when making multiple cuts/chamfers.
• Deburrs inside and outside simultaneously, in just seconds.
• Produces smooth, consistent chamfer on plastic pipe, eliminating leaky glue joints that can be caused by improper chamfer.
• Great for vent pipe such as System 636® pipe.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

REED’s popular DEB1 Series deburring tools are offered with an integral shaft to allow the operator to use with a drill.

• Integrated shaft for drill power operation.
• Knurled grip for slip-resistance and durable aluminum body for longevity.
• Deburr and chamfer in the same rotation.
• Three sizes of pipe accommodated per tool.
• Pipe Capacity nom: 1 1/4", 1 1/2", 2" OD
• Application: PVC, CPVC, PE, ABS and PP.
• Pipe/Tubing: IPS

REED’s popular DEB1 Series deburring tools are offered with an integral shaft to allow the operator to use with a drill.

• Integrated shaft for drill power operation.
• Knurled grip for slip-resistance and durable aluminum body for longevity.
• Deburr and chamfer in the same rotation.
• Three sizes of pipe accommodated per tool.
• Pipe Capacity nom: 1/2", 3/4" 1" OD
• Application: PVC, CPVC, PE, ABS and PP.
• Pipe/Tubing: IPS

PDEB250 Chamfers interior diameter or outer diameter of PVC, CPVC, PE, PP, ABS, PEX

• Chamfer pipe and have it ready for glue in seconds.
• Cone shape chamfers full range of ¾” - 2 ½” nominal plastic pipe sizes.
• Power or manual operation possible due to removeable shaft.
• Works great for PE water service lines.

PDEB250B - Replacement Blades for PDEB250 Cone Chamfer Tool

• Blade with bevel edge for best performance fits REED PDEB250 deburring tool.
• Pack of two allows user to replace both blades at one time.

PE Water Service Shut-Off Tool is designed for emergency shut-off of PE water services.

• Front end of shut-off tool features a snap hinge device that can be taken apart quickly to allow work in confined areas.
• Knurled grip catches and holds the pipe.
• Open end has latch to hold tool closed until the repair is made.
• “One size fits all” emergency shut-off tool squeezes shut PE water lines.
• Shut-Off tool is zinc plated for corrosion resistance.
• Pipe Capacity: 3/4" - 1"
• Length: 20.5"

Static grounding devices provide a path to ground for any static charge. Because static can build up on plastic pipe, even for water services, there is a possibility of a spark discharge of sufficient energy to cause ignition if the proper air/gas mixture is present.

Use of a static electricity grounding device is a precaution that can dissipate the charge and minimize the possibility of ignition. REED strongly recommends use of the PEGR7 model with PE Squeeze-Off Tools and Guillotine Pipe Cutters. 

• Heavy-duty design holds up to field use demands.
• Ground the work area to increase operator safety.
• Heavy-duty cable with 7 foot working distance.
• Set screw lugs enable cable repair by operator.

The True Peel® PE Prep Tool removes dirt and oxidation from the outside diameter of the pipe in preparation for electrofusion.

Fits 1 1/4” CTS SDR11 .121 Wall Mandrel #98669

• Removes .009” - .012” peel thickness.
• Spring actuated blade gives a complete peel, even on out-of-round pipe.
• An observation window allows operator to see when the peel is complete by viewing the pipe end in the middle of the window. 
• External cutting blade allows for clear observation of the peel removal.
• Hardened tool steel cutting blade with two cutting edges for twice the life.
• Close fitting mandrel to round pipe that may be oval.
• Includes a protective carrying case.
• These tools can be used on the ends of pipe or on tapping tee outlets. 
• The PE pipe peeler blade may be rotated 180 degrees to provide a second cutting edge, giving twice the blade life.
• The True Peel® low profile allows it to be used on tapping tee outlets with limited clearance, unlike conventional peelers with a large swing radius.

The True Peel® PE Prep Tool removes dirt and oxidation from the outside diameter of the pipe in preparation for electrofusion.

Fits 1-1/4” IPS DR10 .166 Wall Mandrel #98672

• Removes .009” - .012” peel thickness.
• Spring actuated blade gives a complete peel, even on out-of-round pipe.
• An observation window allows operator to see when the peel is complete by viewing the pipe end in the middle of the window. 
• External cutting blade allows for clear observation of the peel removal.
• Hardened tool steel cutting blade with two cutting edges for twice the life.
• Close fitting mandrel to round pipe that may be oval.
• Includes a protective carrying case.
• These tools can be used on the ends of pipe or on tapping tee outlets. 
• The PE pipe peeler blade may be rotated 180 degrees to provide a second cutting edge, giving twice the blade life.
• The True Peel® low profile allows it to be used on tapping tee outlets with limited clearance, unlike conventional peelers with a large swing radius.

The True Peel® PE Prep Tool removes dirt and oxidation from the outside diameter of the pipe in preparation for electrofusion.

Fits 1 1/4” IPS DR11 .151 Wall Mandrel #98664

• Removes .009” - .012” peel thickness.
• Spring actuated blade gives a complete peel, even on out-of-round pipe.
• An observation window allows operator to see when the peel is complete by viewing the pipe end in the middle of the window. 
• External cutting blade allows for clear observation of the peel removal.
• Hardened tool steel cutting blade with two cutting edges for twice the life.
• Close fitting mandrel to round pipe that may be oval.
• Includes a protective carrying case.
• These tools can be used on the ends of pipe or on tapping tee outlets. 
• The PE pipe peeler blade may be rotated 180 degrees to provide a second cutting edge, giving twice the blade life.
• The True Peel® low profile allows it to be used on tapping tee outlets with limited clearance, unlike conventional peelers with a large swing radius.