The True Peel® PE Prep Tool removes dirt and oxidation from the outside diameter of the pipe in preparation for electrofusion.

Fits 1” CTS SDR11.5 .099 Wall Mandrel #98659

• Removes .009” - .012” peel thickness.
• Spring actuated blade gives a complete peel, even on out-of-round pipe.
• An observation window allows operator to see when the peel is complete by viewing the pipe end in the middle of the window. 
• External cutting blade allows for clear observation of the peel removal.
• Hardened tool steel cutting blade with two cutting edges for twice the life.
• Close fitting mandrel to round pipe that may be oval.
• Includes a protective carrying case.
• These tools can be used on the ends of pipe or on tapping tee outlets. 
• The PE pipe peeler blade may be rotated 180 degrees to provide a second cutting edge, giving twice the blade life.
• The True Peel® low profile allows it to be used on tapping tee outlets with limited clearance, unlike conventional peelers with a large swing radius.

The True Peel® PE Prep Tool removes dirt and oxidation from the outside diameter of the pipe in preparation for electrofusion.

Fits 1” CTS SDR7 .161 Wall Mandrel #98673

• Removes .009” - .012” peel thickness.
• Spring actuated blade gives a complete peel, even on out-of-round pipe.
• An observation window allows operator to see when the peel is complete by viewing the pipe end in the middle of the window. 
• External cutting blade allows for clear observation of the peel removal.
• Hardened tool steel cutting blade with two cutting edges for twice the life.
• Close fitting mandrel to round pipe that may be oval.
• Includes a protective carrying case.
• These tools can be used on the ends of pipe or on tapping tee outlets. 
• The PE pipe peeler blade may be rotated 180 degrees to provide a second cutting edge, giving twice the blade life.
• The True Peel® low profile allows it to be used on tapping tee outlets with limited clearance, unlike conventional peelers with a large swing radius.

The True Peel® PE Prep Tool removes dirt and oxidation from the outside diameter of the pipe in preparation for electrofusion.

Fits 1” IPS DR11 .120 Wall Mandrel #98662

• Removes .009” - .012” peel thickness.
• Spring actuated blade gives a complete peel, even on out-of-round pipe.
• An observation window allows operator to see when the peel is complete by viewing the pipe end in the middle of the window. 
• External cutting blade allows for clear observation of the peel removal.
• Hardened tool steel cutting blade with two cutting edges for twice the life.
• Close fitting mandrel to round pipe that may be oval.
• Includes a protective carrying case.
• These tools can be used on the ends of pipe or on tapping tee outlets. 
• The PE pipe peeler blade may be rotated 180 degrees to provide a second cutting edge, giving twice the blade life.
• The True Peel® low profile allows it to be used on tapping tee outlets with limited clearance, unlike conventional peelers with a large swing radius.

The True Peel® PE Prep Tool removes dirt and oxidation from the outside diameter of the pipe in preparation for electrofusion.

Fits 1” IPS DR7 .188 Wall Mandrel #98665

• Removes .009” - .012” peel thickness.
• Spring actuated blade gives a complete peel, even on out-of-round pipe.
• An observation window allows operator to see when the peel is complete by viewing the pipe end in the middle of the window. 
• External cutting blade allows for clear observation of the peel removal.
• Hardened tool steel cutting blade with two cutting edges for twice the life.
• Close fitting mandrel to round pipe that may be oval.
• Includes a protective carrying case.
• These tools can be used on the ends of pipe or on tapping tee outlets. 
• The PE pipe peeler blade may be rotated 180 degrees to provide a second cutting edge, giving twice the blade life.
• The True Peel® low profile allows it to be used on tapping tee outlets with limited clearance, unlike conventional peelers with a large swing radius.

The True Peel® PE Prep Tool removes dirt and oxidation from the outside diameter of the pipe in preparation for electrofusion.

Fits 2” IPS DR11 .216 Wall Mandrel #98660

• Removes .009” - .012” peel thickness.
• Spring actuated blade gives a complete peel, even on out-of-round pipe.
• An observation window allows operator to see when the peel is complete by viewing the pipe end in the middle of the window. 
• External cutting blade allows for clear observation of the peel removal.
• Hardened tool steel cutting blade with two cutting edges for twice the life.
• Close fitting mandrel to round pipe that may be oval.
• Includes a protective carrying case.
• These tools can be used on the ends of pipe or on tapping tee outlets. 
• The PE pipe peeler blade may be rotated 180 degrees to provide a second cutting edge, giving twice the blade life.
• The True Peel® low profile allows it to be used on tapping tee outlets with limited clearance, unlike conventional peelers with a large swing radius.

The True Peel® PE Prep Tool removes dirt and oxidation from the outside diameter of the pipe in preparation for electrofusion.

Fits 1/2” CTS SDR7 .090 Wall Mandrel #98655

• Removes .009” - .012” peel thickness.
• Spring actuated blade gives a complete peel, even on out-of-round pipe.
• An observation window allows operator to see when the peel is complete by viewing the pipe end in the middle of the window. 
• External cutting blade allows for clear observation of the peel removal.
• Hardened tool steel cutting blade with two cutting edges for twice the life.
• Close fitting mandrel to round pipe that may be oval.
• Includes a protective carrying case.
• These tools can be used on the ends of pipe or on tapping tee outlets. 
• The PE pipe peeler blade may be rotated 180 degrees to provide a second cutting edge, giving twice the blade life.
• The True Peel® low profile allows it to be used on tapping tee outlets with limited clearance, unlike conventional peelers with a large swing radius.

The True Peel® PE Prep Tool removes dirt and oxidation from the outside diameter of the pipe in preparation for electrofusion.

Fits 3/4” IPS DR11 .095 Wall Mandrel #98656

• Removes .009” - .012” peel thickness.
• Spring actuated blade gives a complete peel, even on out-of-round pipe.
• An observation window allows operator to see when the peel is complete by viewing the pipe end in the middle of the window. 
• External cutting blade allows for clear observation of the peel removal.
• Hardened tool steel cutting blade with two cutting edges for twice the life.
• Close fitting mandrel to round pipe that may be oval.
• Includes a protective carrying case.
• These tools can be used on the ends of pipe or on tapping tee outlets. 
• The PE pipe peeler blade may be rotated 180 degrees to provide a second cutting edge, giving twice the blade life.
• The True Peel® low profile allows it to be used on tapping tee outlets with limited clearance, unlike conventional peelers with a large swing radius.

PE Pipe Peeler prepares the outside diameter of polyethylene pipe for electrofusion by removing the oxidized layer and contaminates. 

PE Pipe Peeler can be used on the edge of the pipe or anywhere along the pipe with sufficient clearance for turning the tool around the pipe.

Chain with thermoplastic rollers of acetel copolymer and plated side plates resist corrosion.

Spring-loaded blade keeps consistent pressure on the pipe for a smooth finished surface.

This blade tension means the blade does not skip.  Its carbide blade provides a cutting edge on each side.

Rotate blade before replacement and receive three additional cutting edges.

• One tool covers a range of PE pipe from 6”- 12” nominal IPS (168-324 mm actual O.D.).
• Creates a uniformly peeled surface.
• Works well even on out-of-round pipe.
• Requires 6 1/2" turning clearance around pipe.
• Strong thermoplastic rollers and plated sides on chain resist corrosion.

PE Pipe Peeler prepares the outside diameter of polyethylene pipe for electrofusion by removing the oxidized layer and contaminates. 

PE Pipe Peeler can be used on the edge of the pipe or anywhere along the pipe with sufficient clearance for turning the tool around the pipe.

Chain with thermoplastic rollers of acetel copolymer and plated side plates resist corrosion.

Spring-loaded blade keeps consistent pressure on the pipe for a smooth finished surface.

This blade tension means the blade does not skip.  Its carbide blade provides a cutting edge on each side.

Rotate blade before replacement and receive three additional cutting edges.

• One tool covers a range of PE pipe from 1 1/2”- 6” nominal IPS (48-168 mm actual O.D.).
• Creates a uniformly peeled surface.
• Works well even on out-of-round pipe.
• Requires 5 1/2" turning clearance around pipe.
• Strong thermoplastic rollers and plated sides on chain resist corrosion.

Double bar PE squeeze-off tools provide two pinch points to increase squeeze confidence and yield optimal flow control.  REED offers the best designed tools for stopping flow in ½” up to 8” PE pipe. User input resulted in features like hand grooves for lifting, reduced weight, and a controlled, low-effort squeeze.  Sliding bar handles on these manual squeeze tools make work in tight places easier and increase leverage for tightening. Fine-pitched thread on feed screw allows for a consistent, smooth squeeze. Grease fittings at friction points make operation smooth and extend tool life.

Multiple size/SDR settings on one pair of stops provide convenient over-squeeze protection for standard pipe sizes.

• Heavy-duty construction for use on CTS pipe.
• Double-bar design offers two squeeze points for extra security.
• Two-position handle for work location options.
• Fine thread for smooth squeeze from the operator.
• Grease fittings at friction points.
• Capacity: 1/2"-2" nom. 
• Pipe/SDR Stops: 6  (98078)
• Length: 12"

Reed strongly recommends use of the PEGR7 Static Grounding Device (#04621) with PE Squeeze Tools. Use a grounding device as a precaution against static build-up. Dissipate the charge and minimize the possibility of ignition.

Double bar PE squeeze-off tools provide two pinch points to increase squeeze confidence and yield optimal flow control.  REED offers the best designed tools for stopping flow in ½” up to 8” PE pipe. User input resulted in features like hand grooves for lifting, reduced weight, and a controlled, low-effort squeeze.  Sliding bar handles on these manual squeeze tools make work in tight places easier and increase leverage for tightening. Fine-pitched thread on feed screw allows for a consistent, smooth squeeze. Grease fittings at friction points make operation smooth and extend tool life.

Multiple size/SDR settings on one pair of stops provide convenient over-squeeze protection for standard pipe sizes.

• Heavy-duty construction for use on IPS pipe.
• Double-bar design offers two squeeze points for extra security.
• Two-position handle for work location options.
• Fine thread for smooth squeeze from the operator.
• Grease fittings at friction points.
• Capacity: 1/2"-2" nom. 
• Pipe/SDR Stops: 6  (98079)
• Length: 12"

Reed strongly recommends use of the PEGR7 Static Grounding Device (#04621) with PE Squeeze Tools. Use a grounding device as a precaution against static build-up. Dissipate the charge and minimize the possibility of ignition.

Double bar PE squeeze-off tools provide two pinch points to increase squeeze confidence and yield optimal flow control.  REED offers the best designed tools for stopping flow in ½” up to 8” PE pipe. User input resulted in features like hand grooves for lifting, reduced weight, and a controlled, low-effort squeeze.  Sliding bar handles on these manual squeeze tools make work in tight places easier and increase leverage for tightening. Fine-pitched thread on feed screw allows for a consistent, smooth squeeze. Grease fittings at friction points make operation smooth and extend tool life.

Multiple size/SDR settings on one pair of stops provide convenient over-squeeze protection for standard pipe sizes.

• Optimized double bar design best manages flow control.
• Screw drive design reduces manual operator squeeze effort by approximately 30%.
• Hand placement area machined into bottom bar allows for easy lifting.
• ASTM squeeze and release rates posted on tool body.
• Grease fittings at friction points.

• Capacity: 2"-4" nom.  (2.38" - 4.50" O.D.) 
• Pipe/SDR Stops: 7  (98094)
• Length: 20"

Reed strongly recommends use of the PEGR7 Static Grounding Device (#04621) with PE Squeeze Tools. Use a grounding device as a precaution against static build-up. Dissipate the charge and minimize the possibility of ignition.