Dirt Tamps are used to compact dirt and other common base materials.

• 1/4" Steel Base Plate
• 58" Steel Handle
• Weighs 14.2 lbs.
• 9.940 W • 58.630 L • 4.500 H

 Use Tile Probes to find underground pipes and utility lines

• Solid Steel Tile Probe
• 1/2" Shaft
• Handle End Caps

Cut pipe quickly and with minimal digging using REED Low Clearance Rotary™ Cutters.

• The low profile design of these cutters requires only 5” (127 mm) clearance.
• Excellent for cold cuts.
• Pipe snaps off squarely once the operator completes the cut.

• Application:
• Cast or Ductile Iron 
• Pipe Capacity: Cast & Ductile Iron Nominal 10" - 12" 
• Cutter Wheel: RCI8-30
• Length: 61"
• Weight: 50 lbs

Cut pipe quickly and with minimal digging using REED Low Clearance Rotary™ Cutters.

• The low profile design of these cutters requires only 5” (127 mm) clearance.
• Excellent for cold cuts.
• Pipe snaps off squarely once the operator completes the cut.

• Application:
• Steel/Stainless Steel Sch. 40  
• Pipe Capacity: Steel Nominal 10" - 14" 
• Cutter Wheel: RCS8-36
• Length: 61"
• Weight: 50 lbs

Cut pipe quickly and with minimal digging using REED Low Clearance Rotary™ Cutters.

• Cutter is equipped with RCX Cutter Wheels and special RC8-30XR Outboard Rollers. 
• This enables it to cut thicker wall steel and stainless steel pipe as the RCX Cutter Wheel has a .800" (20.3 mm) blade exposure.

• Application:
• Steel/Stainless Steel Sch. 40 & 80
• Pipe Capacity: Steel Nominal 10" - 14" 
• Cutter Wheel: RCX
• Length: 61"
• Weight: 50 lbs

Cut pipe quickly and with minimal digging using REED Low Clearance Rotary™ Cutters.

• The low profile design of these cutters requires only 5” (127 mm) clearance.
• Excellent for cold cuts.
• Pipe snaps off squarely once the operator completes the cut.

• Application:
• Cast or Ductile Iron  
• Pipe Capacity: Cast or Ductile Iron Nominal 14" - 16" 
• Cutter Wheel: RCI8-30
• Length: 66"
• Weight: 60 lbs

Cut pipe quickly and with minimal digging using REED Low Clearance Rotary™ Cutters.

• The low profile design of these cutters requires only 5” (127 mm) clearance.
• Excellent for cold cuts.
• Pipe snaps off squarely once the operator completes the cut.

• Application:
• Steel/Stainless Steel Sch. 40  
• Pipe Capacity: Steel Nominal 16" - 18" 
• Cutter Wheel: RCS8-36
• Length: 66"
• Weight: 60 lbs

Cut pipe quickly and with minimal digging using REED Low Clearance Rotary™ Cutters.

• Cutter is equipped with RCX Cutter Wheels and special RC8-30XR Outboard Rollers. 
• This enables it to cut thicker wall steel and stainless steel pipe as the RCX Cutter Wheel has a .800" (20.3 mm) blade exposure.

• Application:
• Steel/Stainless Steel Sch. 40 & 80
• Pipe Capacity: Steel Nominal 16" - 18" 
• Cutter Wheel: RCX
• Length: 66"
• Weight: 60 lbs

Cut pipe quickly and with minimal digging using REED Low Clearance Rotary™ Cutters.

• Cuts 2 – 4 inch cast iron and ductile iron pipe.
• Change the cutter wheels to use this model to cut steel pipe.
• Features a slip-on handle that is used to both tighten and turn the cutter around the pipe in one direction.
• Only needs 4 inch (102 mm) clearance around the pipe which means these tools cut pipes that other tools cannot reach.
• Heavy-duty, ductile iron frames.

• Application:
• Cast or Ductile Iron  
• Pipe Capacity: Cast or Ductile Iron Nominal 2" - 4" 
• Cutter Wheel: HI4
• Length: 19"
• Weight: 13 lbs

Cut pipe quickly and with minimal digging using REED Low Clearance Rotary™ Cutters.

• Cuts 2 – 4 inch steel pipe.
• Change the cutter wheels to use this model to cut cast iron and ductile iron pipe.
• Features a slip-on handle that is used to both tighten and turn the cutter around the pipe in one direction.
• Only needs 4 inch (102 mm) clearance around the pipe which means these tools cut pipes that other tools cannot reach.
• Heavy-duty, ductile iron frames.

• Application:
• Steel/Stainless Steel Sch. 40  
• Pipe Capacity: Steel Nominal 2" - 4" 
• Cutter Wheel: HS4
• Length: 19"
• Weight: 13 lbs

Cut pipe quickly and with minimal digging using REED Low Clearance Rotary™ Cutters. 

• Cuts 2 – 4 inch steel/stainless pipe, schedules 40 and 80.
• Change the cutter wheels to use this model to cut cast iron and ductile iron pipe.
• Features a slip-on handle that is used to both tighten and turn the cutter around the pipe in one direction.
• Only needs 4 inch (102 mm) clearance around the pipe which means these tools cut pipes that other tools cannot reach.
• Heavy-duty, ductile iron frames.

• Application:
• Steel/Stainless Steel Sch. 40 & 80  
• Pipe Capacity: Steel Nominal 2" - 4" 
• Cutter Wheel: HX4
• Length: 19"
• Weight: 13 lbs

Cut pipe quickly and with minimal digging using REED Low Clearance Rotary™ Cutters.

• The low profile design of these cutters requires only 5” (127 mm) clearance.
• Excellent for cold cuts.
• Pipe snaps off squarely once the operator completes the cut.

• Application:
• Cast or Ductile Iron  
• Pipe Capacity: Cast or Ductile Iron Nominal 6" - 8" 
• Cutter Wheel: RCI8-30
• Length: 58"
• Weight: 43 lbs