REED produces a heavy-duty power transmission belting pipe descaler, DS12B. Its handles and scrapers are blackened for good rust protection. Belt descaler benefits include lighter weight than all-metal descalers or chains, longer length to ease back strain during use, and high-profile scrapers that don’t clog with dirt as readily. REED also offers replacement belts with scrapers attached; simply bolt the new belt onto the handles.

• Use pipe descalers to clean pipe before cutting or water tapping or drilling.
• Roller handles allow smoother movement in use.
• Faster and more effective than chisels, chains or files.
• Needs only 2” of clearance around the pipe.
• Pipe Capacity: 3" - 12" nominal
• Length: 45"

Reed pipe descalers feature wide, tough scrapers that remove scale, dirt, and corrosion quickly from the pipe surface to allow more effective cutting, joining, gasket/valve seating or other operations.

• Use pipe descalers to clean pipe before cutting or water tapping or drilling.
• Roller handles allow smoother movement in use.
• Made entirely of steel that is zinc-plated for corrosion resistance and toughness.
• The scrapers are welded on for long life and can be sharpened.
• Faster and more effective than chisels, chains or files.
• Needs only 2” of clearance around the pipe.
• Pipe Capacity: 12" - 36" nominal
• Length: 44"

• 
• Drill Size: 1" 
• Thread: CC
• Pipe Material: Cast / Ductile
• AWWA Approved

Features

• 1” CC AWWA water service drill tap for cast/ductile iron pipe.
• DT100 drill tap performs fast with six cutting edges for clean threads.
• Sharp point (tip) for easy starts.
• Fits these direct tapping machines: Reed TM1100, CDTM1100, CDTM2100, Mueller B-100™, B-101™, A-3™, Romac Transmate B-1™, B-Too™, Footage

• 
• Drill Size: 1" 
• Thread: CC
• Pipe Material: PVC C900

Features

• Retains the coupon and cuttings to save the operator time and effort.
• Three-spiral flute cuts easier with less friction.

• 
• Drill Size: 3/4" 
• Thread: CC
• Pipe Material: Cast / Ductile
• AWWA Approved

Features

• 3/4” CC AWWA water service drill tap for cast/ductile iron pipe.
• DT75 drill tap performs fast with six cutting edges for clean threads.
• Sharp point (tip) for easy starts.
• DT75 has been used by the AWWA Tapping Competition winning teams for over 25 years!
• Fits these direct tapping machines: Reed TM1100, CDTM1100, CDTM2100, Mueller B-100™, B-101™, Romac Transmate B-1™, B-Too™

• 
• Drill Size: 3/4" 
• Thread: CC
• Pipe Material: PVC C900

Features

• Retains the coupon and cuttings to save the operator time and effort.
• Three-spiral flute cuts easier with less friction.

For hard-to-reach deep well bolts, Reed offers Extended Sockets that are made of tool steel and are impact grade. Use Extended Sockets to tighten hex nuts on repair clamps, mechanical joint fittings, and saddles. Drive them with a 1/2” square drive impact wrench or hand tighten. Finish on sockets provides corrosion-resistance.

• All 5 Reed Extended Sockets in a portable, heavy-duty case.
• Perfect for hard-to-reach deep well bolts.
• Extended length (6” and 6 ½”) impact grade sockets.
• Drive them with a 1/2” square drive impact wrench or hand tighten.
• Sockets sizes: 3/4", 7/8", 1 1/16", 1 1/8" and 1 1/4"

For hard-to-reach deep well bolts, Reed offers Extended Sockets that are made of tool steel and are impact grade. Use Extended Sockets to tighten hex nuts on repair clamps, mechanical joint fittings, and saddles. Drive them with a 1/2” square drive impact wrench or hand tighten. Finish on sockets provides corrosion-resistance.

• All 6 Reed Extended Sockets in a portable, heavy-duty case.
• Perfect for hard-to-reach deep well bolts.
• Extended length (6” and 6 ½”) impact grade sockets.
• Drive them with a 1/2” square drive impact wrench or hand tighten.
• Sockets sizes: 3/4", 7/8", 15/16", 1 1/16", 1 1/8" and 1 1/4"

Electric Hydrostatic Test Pumps are designed for pressure testing water systems such as water meters, plumbing lines, pressure vessels, solar systems and sprinkler systems, in both residential and commercial buildings. The output pressure is easily adjusted by turning a knob and watching the attached gauge. A built-in bypass allows for automatic water recirculation once the set pressure is reached. The hose-to-pump connection features a quick disconnect with built-in check valve, which allows for convenient setup and portability. Durable pump has stainless steel piston and brass cylinder for long pump life. Replacement seal kits available to sustain pump efficiency.

• Power Source: 110V, single phase 50/60 Hz
• Inlet: 3/4" GHT
• Outlet: 1/2" NPSM
• Discharge Hose: 3/8" x 15'  
• Maximum Capacity: 2 gal/min   -   500 psi

Features

• Smooth running, quiet 3/4 hp motor.
• Electric pump includes a 15' (46m) high pressure hose for filling the system.
• Test water meters, plumbing lines, pressure vessels, solar systems and sprinkler systems.
• Output pressure adjusts easily.

Electric Hydrostatic Test Pumps are designed for pressure testing water systems such as water meters, plumbing lines, pressure vessels, solar systems and sprinkler systems, in both residential and commercial buildings. The output pressure is easily adjusted by turning a knob and watching the attached gauge. A built-in bypass allows for automatic water recirculation once the set pressure is reached. The hose-to-pump connection features a quick disconnect with built-in check valve, which allows for convenient setup and portability. Durable pump has stainless steel piston and brass cylinder for long pump life. Replacement seal kits available to sustain pump efficiency.

• Power Source: 110V, single phase 50/60 Hz
• Inlet: 3/4" GHT
• Outlet: 1/2" NPSM
• Discharge Hose: 3/8" x 15'  
• Maximum Capacity: 2 gal/min   -   500 psi

Features

• Smooth running, quiet 3/4 hp motor.
• Electric pump includes a 15' high pressure hose for filling the system.
• Test water meters, plumbing lines, pressure vessels, solar systems and sprinkler systems.
• Output pressure adjusts easily.
• Pump housed in protective cage.
• Easy to carry to jobsite.

Replacement discharge hose 

• 15' High Pressure Output Hose, 3/8" discharge.
• Fits EHTP and DPHTP Hydrostatic Test Pumps.
• High pressure hose for contractor use. 

Convenient adjusting screw and a hardened steel locking ring are two features that make these pipe jacks last for many years of use.

• Legs fold for compact storage and easier portability.
• Adjusting screw gives proper working height.
• 1” safety zone created by patented internal safety stop to protect against operator injuries.
• Outer surfaces are powder painted or zinc phosphate plated to resist corrosion.
• Height Adjustment: 28" - 49"
• Weight Capacity: 2500 lbs.
• Pipe Capacity: 1/8" - 24"
• Weight: 25 lbs. 

All pipe jack options: JHV, JFV (Folding Leg), JH2R, V-Head, Roller Head or JTA (Ball Transfer Head)

• Lower cost, v-head JHV is suitable for most ordinary pipe support needs
• JFV Folding Pipe Jack offers same great features plus legs fold for compact storage and easier portability. 
• Roller head jack JH2R has extra wide bearing for great strength and tool life. Roller head jacks are preferred when circumstances call for the pipe to be turned for fabrication such as welding or roll grooving.
• V-Head suitable for most ordinary pipe support needs.
• ROLLER HEAD has extra wide bearing for great strength and tool life. Roller head jacks are preferred when circumstances call for the pipe to be turned for fabrication such as welding or roll grooving.
• The 1,000 lb capacity ball transfer attachment JTA with replaceable ball casters bolts to either side of v-head models. Ball transfer head JTA attaches to RIDGID and Sumner models.
• All Reed heads and bases interchange with Sumner and Greenlee.