• Fits Hole Saws: 20L - 96L
• Sizes: 1 1/4" - 6"
• Shank Type: Hex
• Shank Size: 3/8" & Larger
• Pilot Drill Bit: 3 1/4"
• Quick arbor change

ADDED DURABILITY
Hardened carbon steel for strength

STARTS ON CONTACT
Split point pilot drill for faster penetration and less walking

For use with Round or Circle Top Staples to hold erosion blankets or geotextiles in place.

Purchase by the box Magnetic Pounder Driver Stapler for Round Top Staples (Box of 5)

• Cushioned grip
• Solid magnet engineered for stapling
• Light weight – less than 3 pounds
• Can be used on slopes and flat areas
• Economically priced
• Works in all types of soils
• No jamming

For use with Round or Circle Top Staples to hold erosion blankets or geotextiles in place.

Purchase individual stapler: Erosion Control EZ Stapler for 6" Loose U-Staples

• Cushioned grip
• Solid magnet engineered for stapling
• Light weight – less than 3 pounds
• Can be used on slopes and flat areas
• Economically priced
• Works in all types of soils
• No jamming

PLAS In-Line Rotary™ Cutters are excellent for cutting PVC pipe in trench or above ground. 

PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.

• Pipe Diameter: 6" - 12"
• Application: PVC Sch. 40, PVC C900 & C905
• Sections Used: A, B, C

For cutting PVC pipe, the long-lasting carbide-tipped blades penetrate up to a 2” wall thickness.

• Safe to use as it creates no dust and chips fall where they are cut. There is no danger of chips being blown well into pipe.
• Only 6"-8" clearance needed to turn PLAS tool around pipe.
• Cuts out-of-round pipe because of spring loaded nuts.
• Simultaneously cut and bevel PVC using cut-off blade and bevel blade.
• This is an inexpensive tool for contractors to use to make a cut for a tie-in or pipe break and then get the line back in use. Reduce overall labor costs.

PLAS In-Line Rotary™ Cutters are excellent for cutting PE / HDPE pipe in trench or above ground. 

PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.

• Pipe Diameter: 6" - 12"
• Application: PE, HDPE
• Sections Used: A, B, C

PLAS Cutter Specific Limitations for PE:
up to 14" pipe (355 mm) - 2" (51 mm) wall thickness
up to 18" pipe (500 mm) - 1 1/2" (38 mm) wall thickness
up to 28" pipe (800 mm) - 1" (25.4 mm) wall thickness

• Safe to use as it creates no dust and chips fall where they are cut. There is no danger of chips being blown well into pipe.
• Only 6"-8" clearance needed to turn PLAS tool around pipe.
• Cuts out-of-round pipe because of spring loaded nuts.
• Simultaneously cut and bevel PE using cut-off blade and bevel blade.
• This is an inexpensive tool for contractors to use to make a cut for a tie-in or pipe break and then get the line back in use. Reduce overall labor costs.

PLAS In-Line Rotary™ Cutters are excellent for cutting PVC pipe in trench or above ground. 

PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.

• Pipe Diameter: 14" - 18"
• Application: PVC Sch. 40, PVC C900 & C905
• Sections Used: B, C (2), D

For cutting PVC pipe, the long-lasting carbide-tipped blades penetrate up to a 2” wall thickness.

• Safe to use as it creates no dust and chips fall where they are cut. There is no danger of chips being blown well into pipe.
• Only 6"-8" clearance needed to turn PLAS tool around pipe.
• Cuts out-of-round pipe because of spring loaded nuts.
• Simultaneously cut and bevel PVC using cut-off blade and bevel blade.
• This is an inexpensive tool for contractors to use to make a cut for a tie-in or pipe break and then get the line back in use. Reduce overall labor costs.

PLAS In-Line Rotary™ Cutters are excellent for cutting PE / HDPE pipe in trench or above ground. 

PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.

• Pipe Diameter: 14" - 18"
• Application: PE, HDPE
• Sections Used: B, C (2), D

PLAS Cutter Specific Limitations for PE:
up to 14" pipe (355 mm) - 2" (51 mm) wall thickness
up to 18" pipe (500 mm) - 1 1/2" (38 mm) wall thickness
up to 28" pipe (800 mm) - 1" (25.4 mm) wall thickness

• Safe to use as it creates no dust and chips fall where they are cut. There is no danger of chips being blown well into pipe.
• Only 6"-8" clearance needed to turn PLAS tool around pipe.
• Cuts out-of-round pipe because of spring loaded nuts.
• Simultaneously cut and bevel PE using cut-off blade and bevel blade.
• This is an inexpensive tool for contractors to use to make a cut for a tie-in or pipe break and then get the line back in use. Reduce overall labor costs.

PLAS In-Line Rotary™ Cutters are excellent for cutting PVC pipe in trench or above ground. 

PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.

• Pipe Diameter: 14" - 24"
• Application: PVC Sch. 40, PVC C900 & C905
• Sections Used: B, C (3), D

For cutting PVC pipe, the long-lasting carbide-tipped blades penetrate up to a 2” wall thickness.

• Safe to use as it creates no dust and chips fall where they are cut. There is no danger of chips being blown well into pipe.
• Only 6"-8" clearance needed to turn PLAS tool around pipe.
• Cuts out-of-round pipe because of spring loaded nuts.
• Simultaneously cut and bevel PVC using cut-off blade and bevel blade.
• This is an inexpensive tool for contractors to use to make a cut for a tie-in or pipe break and then get the line back in use. Reduce overall labor costs.

PLAS In-Line Rotary™ Cutters are excellent for cutting PE / HDPE pipe in trench or above ground. 

PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.

• Pipe Diameter: 14" - 24"
• Application: PE, HDPE
• Sections Used: B, C (3), D

PLAS Cutter Specific Limitations for PE:
up to 14" pipe (355 mm) - 2" (51 mm) wall thickness
up to 18" pipe (500 mm) - 1 1/2" (38 mm) wall thickness
up to 28" pipe (800 mm) - 1" (25.4 mm) wall thickness

• Safe to use as it creates no dust and chips fall where they are cut. There is no danger of chips being blown well into pipe.
• Only 6"-8" clearance needed to turn PLAS tool around pipe.
• Cuts out-of-round pipe because of spring loaded nuts.
• Simultaneously cut and bevel PE using cut-off blade and bevel blade.
• This is an inexpensive tool for contractors to use to make a cut for a tie-in or pipe break and then get the line back in use. Reduce overall labor costs.

PLAS In-Line Rotary™ Cutters are excellent for cutting PVC pipe in trench or above ground. 

PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.

• Pipe Diameter: 14" - 28"
• Application: PVC Sch. 40, PVC C900 & C905
• Sections Used: B, C (4), D

For cutting PVC pipe, the long-lasting carbide-tipped blades penetrate up to a 2” wall thickness.

• Safe to use as it creates no dust and chips fall where they are cut. There is no danger of chips being blown well into pipe.
• Only 6"-8" clearance needed to turn PLAS tool around pipe.
• Cuts out-of-round pipe because of spring loaded nuts.
• Simultaneously cut and bevel PVC using cut-off blade and bevel blade.
• This is an inexpensive tool for contractors to use to make a cut for a tie-in or pipe break and then get the line back in use. Reduce overall labor costs.

PLAS In-Line Rotary™ Cutters are excellent for cutting PE / HDPE pipe in trench or above ground. 

PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.

• Pipe Diameter: 14" - 28"
• Application: PE, HDPE
• Sections Used: B, C (4), D

PLAS Cutter Specific Limitations for PE:
up to 14" pipe (355 mm) - 2" (51 mm) wall thickness
up to 18" pipe (500 mm) - 1 1/2" (38 mm) wall thickness
up to 28" pipe (800 mm) - 1" (25.4 mm) wall thickness

• Safe to use as it creates no dust and chips fall where they are cut. There is no danger of chips being blown well into pipe.
• Only 6"-8" clearance needed to turn PLAS tool around pipe.
• Cuts out-of-round pipe because of spring loaded nuts.
• Simultaneously cut and bevel PE using cut-off blade and bevel blade.
• This is an inexpensive tool for contractors to use to make a cut for a tie-in or pipe break and then get the line back in use. Reduce overall labor costs.

PLAS Hand-over-Hand Rotary™ Cutters are excellent for cutting PVC pipe in trench or above ground. 

PLAS Hand-over-Hand Rotary™ Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.

• Pipe Diameter: 4" - 8"
• Application: PVC Sch. 40, PVC C900 & C905
• Sections Used: E (2)

For cutting PVC pipe, the long-lasting carbide-tipped blades penetrate up to a 2” wall thickness.

• Excellent for cutting PVC pipe in-trench or above ground.
• Attached handles permit fast hand-turning – about half the cutting time of a regular PLAS cutter.
• Leaves a disposable remnant (not dust or chips) that is easy to recycle.
• Simultaneously cut and bevel PVC using cut-off blade and bevel blade.
• Simple to transport and fast to use.