Trench Drain Pool & Deck

PURCHASE FROM OUR STORE

NDS 864G Contractor (4 Pack) Channel Drain Kit - Plastic Grate

NDS 864G Contractor (4 Pack) Channel Drain Kit - Plastic Grate

  • SKU: NDS864_BX
  • Brand: NDS

  • Product Description:

    Individual channels drain kits available NDS 5" Channel Drain Kit - Plastic Grate

    5" Pro Series channel drains also come in pre-assembled kits to decrease installation time. They act as perimeter drains, quickly removing water from hardscapes and directing it away from building structures. A bottom outlet is built into each channel section.

    Features

    • Kit include channel, grates, one end cap and one end outlet
    • 39 3/8" long deep profile polypropylene channel drain with mechanical interlocking joint
    • Structural foam polyolefin light traffic channel grate
    • Open surface area 25.12 square inches per foot
    • 32.91 GPM per foot
    • UV inhibitors
    • Recommended for medium-duty pneumatic tire traffic.
    • Autos and light trucks less than 20 mph
    • Class B Load Rating: 61-175 psi
    • Create a channel as long as you need, or reduce to lengths as short as 4" for smaller, interlocking sections
    • End cap/knock-out end and outlet fitting simplifies assembly and installation
    • End outlet fits 3" Sewer & Drain Pipe and 4" Sewer & Drain Fittings
    • Bottom outlet fits 3" & 4" Sewer & Drain Fittings
    • See Technical Specs • Product Brochures & Specifications for installation recommendations

NDS 864G Pro Series 5

NDS 864G Pro Series 5" x 1 Meter Deep Profile Channel Drain Kit

  • SKU: NDS864
  • Brand: NDS

  • Product Description:

    Also Available: Contractor Pack of 4 Channel Drains Kits NDS 864G Contractor (4 Pack) Channel Drain Kit - Plastic Grate NDS864_BX

    5" Pro Series channel drains also come in pre-assembled kits to decrease installation time. They act as perimeter drains, quickly removing water from hardscapes and directing it away from building structures. A bottom outlet is built into each channel section.

    Features

    • Kit include channel, grates, one end cap and one end outlet
    • 39 3/8" long deep profile polypropylene channel drain with mechanical interlocking joint
    • Structural foam polyolefin light traffic channel grate
    • Open surface area 25.12 square inches per foot
    • 32.91 GPM per foot
    • UV inhibitors
    • Recommended for medium-duty pneumatic tire traffic.
    • Autos and light trucks less than 20 mph
    • Class B Load Rating: 61-175 psi
    • Create a channel as long as you need, or reduce to lengths as short as 4" for smaller, interlocking sections
    • End cap/knock-out end and outlet fitting simplifies assembly and installation
    • End outlet fits 3" Sewer & Drain Pipe and 4" Sewer & Drain Fittings
    • Bottom outlet fits 3" & 4" Sewer & Drain Fittings
    • See Technical Specs • Product Brochures & Specifications for installation recommendations

     


NDS 864GMTL 5

NDS 864GMTL 5" Pro Series Channel Drain Kit - Galvanized Metal Grate

  • SKU: NDS864GMTL
  • Brand: NDS

  • Product Description:

    Also Available: Contractor Pack of 4 Channel Drains Kits Contractor (3 Pack) Channel Drain Kit - Galvanized Grate NDS864GMTL_BX

    5" Pro Series channel drains with galvanized metal grate. Come in pre-assembled kits to decrease installation time. They act as perimeter drains, quickly removing water from hardscapes and directing it away from building structures. A bottom outlet is built into each channel section.

    Features

    • Kit include channel, grates, one end cap and one end outlet
    • 39 3/8" long deep profile polypropylene channel drain with mechanical interlocking joint
    • Galvanized Metal Grate
    • Recommended for medium-duty pneumatic tire traffic.
    • Autos and light trucks less than 20 mph
    • Class B Load Rating: 61-175 psi
    • Create a channel as long as you need, or reduce to lengths as short as 4" for smaller, interlocking sections
    • End cap/knock-out end and outlet fitting simplifies assembly and installation
    • End outlet fits 3" Sewer & Drain Pipe and 4" Sewer & Drain Fittings
    • Bottom outlet fits 3" & 4" Sewer & Drain Fittings
    • See Technical Specs • Product Brochures & Specifications for installation recommendations

     


NDS 864GMTL Contractor (3 Pack) Channel Drain Kit - Galvanized Grate

NDS 864GMTL Contractor (3 Pack) Channel Drain Kit - Galvanized Grate

  • SKU: NDS864GMTL_BX
  • Brand: NDS

  • Product Description:

    Individual channels drain kits available NDS 5" Channel Drain Kit - Metal Grate

    5" Pro Series channel drains with galvanized metal grate. Come in pre-assembled kits to decrease installation time. They act as perimeter drains, quickly removing water from hardscapes and directing it away from building structures. A bottom outlet is built into each channel section.

    Features

    • Kit include channel, grates, one end cap and one end outlet
    • 39 3/8" long deep profile polypropylene channel drain with mechanical interlocking joint
    • Galvanized Metal Grate
    • Recommended for medium-duty pneumatic tire traffic.
    • Autos and light trucks less than 20 mph
    • Class B Load Rating: 61-175 psi
    • Create a channel as long as you need, or reduce to lengths as short as 4" for smaller, interlocking sections
    • End cap/knock-out end and outlet fitting simplifies assembly and installation
    • End outlet fits 3" Sewer & Drain Pipe and 4" Sewer & Drain Fittings
    • Bottom outlet fits 3" & 4" Sewer & Drain Fittings
    • See Technical Specs • Product Brochures & Specifications for installation recommendations

NDS Dura Slope Channel Drain 090N (3.99

NDS Dura Slope Channel Drain 090N (3.99" Neutral)

  • SKU: NDSDS-090N
  • Brand: NDS

  • Product Description:

    3.99" Deep Neutral Dura Slope Channel

    Features

    • NDS Dura Slope™ is a 6 5/8” wide, 48” long trench drain system with a built-in slope of 0.7%.
    • "N" sections sections are non-sloped and used to extend the legnth of the system
    • Each channel section is molded of gray structural foam polyethylene with UV inhibitors
    • 4” inside diameter with a 2” radius bottom
    • 3.99" Deep Neutral Dura Slope Channel
    • • • One end connects to DS-090N, DS-224 End Cap or DS-227 End Outlet
    • • • One end connects to DS-090N, DS-091, DS-224 End Cap or DS-227 End Outlet
    • LeveLoc™ re-bar supports with integral protruding knob
    • • • Levels channel and grips re-bar
    • • • Requires fewer accessories
    • ProFit™ locking system
    • • • Locks grate to integral frame
    • • • Supports product during installation
    • DuraLoc™ integral joint lock
    • • • Prevents joint movement during installation
    • • • No extra clamps or screws needed
    • Interlocking tongue and groove joints
    • Bottom outlet on each channel section
    • 0.7% built-in slope

     


NDS Dura Slope Channel Drain 091 (3.99

NDS Dura Slope Channel Drain 091 (3.99" to 4.34")

  • SKU: NDSDS-091
  • Brand: NDS

  • Product Description:

    3.99" to 4.34" Deep Dura Slope Channel

    Features

    • NDS Dura Slope™ is a 6 5/8” wide, 48” long trench drain system with a built-in slope of 0.7%.
    • "N" sections sections are non-sloped and used to extend the legnth of the system
    • Each channel section is molded of gray structural foam polyethylene with UV inhibitors
    • 4” inside diameter with a 2” radius bottom
    • 3.99" to 4.34" Deep Dura Slope Channel
    • • • 3.99" end connects to DS-090N, DS-224 End Cap or DS-227 End Outlet
    • • • 4.34" end connects to DS-091N, DS-092, DS-224 End Cap or DS-227 End Outlet
    • LeveLoc™ re-bar supports with integral protruding knob
    • • • Levels channel and grips re-bar
    • • • Requires fewer accessories
    • ProFit™ locking system
    • • • Locks grate to integral frame
    • • • Supports product during installation
    • DuraLoc™ integral joint lock
    • • • Prevents joint movement during installation
    • • • No extra clamps or screws needed
    • Interlocking tongue and groove joints
    • Bottom outlet on each channel section
    • 0.7% built-in slope

     


NDS Dura Slope Channel Drain 091N (4.34

NDS Dura Slope Channel Drain 091N (4.34" Neutral)

  • SKU: NDSDS-091N
  • Brand: NDS

  • Product Description:

    4.34" Deep Neutral Dura Slope Channel

    Features

    • NDS Dura Slope™ is a 6 5/8” wide, 48” long trench drain system with a built-in slope of 0.7%.
    • "N" sections sections are non-sloped and used to extend the legnth of the system
    • Each channel section is molded of gray structural foam polyethylene with UV inhibitors
    • 4” inside diameter with a 2” radius bottom
    • 4.34" Deep Neutral Dura Slope Channel
    • • • One end connects to DS-091, DS-224 End Cap or DS-227 End Outlet
    • • • One end connects to DS-092, DS-224 End Cap or DS-227 End Outlet
    • LeveLoc™ re-bar supports with integral protruding knob
    • • • Levels channel and grips re-bar
    • • • Requires fewer accessories
    • ProFit™ locking system
    • • • Locks grate to integral frame
    • • • Supports product during installation
    • DuraLoc™ integral joint lock
    • • • Prevents joint movement during installation
    • • • No extra clamps or screws needed
    • Interlocking tongue and groove joints
    • Bottom outlet on each channel section
    • 0.7% built-in slope

     


NDS Dura Slope Channel Drain 092 (4.34

NDS Dura Slope Channel Drain 092 (4.34" to 4.67")

  • SKU: NDSDS-092
  • Brand: NDS

  • Product Description:

    4.34" to 4.67" Deep Dura Slope Channel

    Features

    • NDS Dura Slope™ is a 6 5/8” wide, 48” long trench drain system with a built-in slope of 0.7%.
    • "N" sections sections are non-sloped and used to extend the legnth of the system
    • Each channel section is molded of gray structural foam polyethylene with UV inhibitors
    • 4” inside diameter with a 2” radius bottom
    • 4.34" to 4.67" Deep Dura Slope Channel
    • • • 4.34" end connects to DS-091N, DS-091, DS-224 End Cap or DS-227 End Outlet
    • • • 4.67" end connects to DS-093, DS-224 End Cap or DS-227 End Outlet
    • LeveLoc™ re-bar supports with integral protruding knob
    • • • Levels channel and grips re-bar
    • • • Requires fewer accessories
    • ProFit™ locking system
    • • • Locks grate to integral frame
    • • • Supports product during installation
    • DuraLoc™ integral joint lock
    • • • Prevents joint movement during installation
    • • • No extra clamps or screws needed
    • Interlocking tongue and groove joints
    • Bottom outlet on each channel section
    • 0.7% built-in slope

     


NDS Dura Slope Channel Drain 093 (4.67

NDS Dura Slope Channel Drain 093 (4.67" to 5.00")

  • SKU: NDSDS-093
  • Brand: NDS

  • Product Description:

    4.67" to 5.00" Deep Dura Slope Channel

    Features

    • NDS Dura Slope™ is a 6 5/8” wide, 48” long trench drain system with a built-in slope of 0.7%.
    • "N" sections sections are non-sloped and used to extend the legnth of the system
    • Each channel section is molded of gray structural foam polyethylene with UV inhibitors
    • 4” inside diameter with a 2” radius bottom
    • 4.67" to 5.00" Deep Dura Slope Channel
    • • • 4.67" end connects to DS-092, DS-224 End Cap or DS-227 End Outlet
    • • • 5.00" end connects to DS-094, DS-224 End Cap or DS-227 End Outlet
    • LeveLoc™ re-bar supports with integral protruding knob
    • • • Levels channel and grips re-bar
    • • • Requires fewer accessories
    • ProFit™ locking system
    • • • Locks grate to integral frame
    • • • Supports product during installation
    • DuraLoc™ integral joint lock
    • • • Prevents joint movement during installation
    • • • No extra clamps or screws needed
    • Interlocking tongue and groove joints
    • Bottom outlet on each channel section
    • 0.7% built-in slope

     


NDS Dura Slope Channel Drain 094 (5.00

NDS Dura Slope Channel Drain 094 (5.00" to 5.34")

  • SKU: NDSDS-094
  • Brand: NDS

  • Product Description:

    5.00" to 5.34" Deep Dura Slope Channel

    Features

    • NDS Dura Slope™ is a 6 5/8” wide, 48” long trench drain system with a built-in slope of 0.7%.
    • "N" sections sections are non-sloped and used to extend the legnth of the system
    • Each channel section is molded of gray structural foam polyethylene with UV inhibitors
    • 4” inside diameter with a 2” radius bottom
    • 5.00" to 5.34" Deep Dura Slope Channel
    • • • 5.00" end connects to DS-093, DS-224 End Cap or DS-227 End Outlet
    • • • 5.34" end connects to DS-094N, DS-095, DS-224 End Cap or DS-227 End Outlet
    • LeveLoc™ re-bar supports with integral protruding knob
    • • • Levels channel and grips re-bar
    • • • Requires fewer accessories
    • ProFit™ locking system
    • • • Locks grate to integral frame
    • • • Supports product during installation
    • DuraLoc™ integral joint lock
    • • • Prevents joint movement during installation
    • • • No extra clamps or screws needed
    • Interlocking tongue and groove joints
    • Bottom outlet on each channel section
    • 0.7% built-in slope

     


NDS Dura Slope Channel Drain 094N (5.34

NDS Dura Slope Channel Drain 094N (5.34" Neutral)

  • SKU: NDSDS-094N
  • Brand: NDS

  • Product Description:

    5.34" Deep Neutral Dura Slope Channel

    Features

    • NDS Dura Slope™ is a 6 5/8” wide, 48” long trench drain system with a built-in slope of 0.7%.
    • "N" sections sections are non-sloped and used to extend the legnth of the system
    • Each channel section is molded of gray structural foam polyethylene with UV inhibitors
    • 4” inside diameter with a 2” radius bottom
    • 5.34" Deep Neutral Dura Slope Channel
    • • • One end connects to DS-094, DS-224 End Cap or DS-227 End Outlet
    • • • One end connects to DS-095, DS-224 End Cap or DS-227 End Outlet
    • LeveLoc™ re-bar supports with integral protruding knob
    • • • Levels channel and grips re-bar
    • • • Requires fewer accessories
    • ProFit™ locking system
    • • • Locks grate to integral frame
    • • • Supports product during installation
    • DuraLoc™ integral joint lock
    • • • Prevents joint movement during installation
    • • • No extra clamps or screws needed
    • Interlocking tongue and groove joints
    • Bottom outlet on each channel section
    • 0.7% built-in slope

     


NDS Dura Slope Channel Drain 095 (5.34

NDS Dura Slope Channel Drain 095 (5.34" to 5.68")

  • SKU: NDSDS-095
  • Brand: NDS

  • Product Description:

    5.34" to 5.68" Deep Dura Slope Channel

    Features

    • NDS Dura Slope™ is a 6 5/8” wide, 48” long trench drain system with a built-in slope of 0.7%.
    • "N" sections sections are non-sloped and used to extend the legnth of the system
    • Each channel section is molded of gray structural foam polyethylene with UV inhibitors
    • 4” inside diameter with a 2” radius bottom
    • 5.34" to 5.68" Deep Dura Slope Channel
    • • • 5.34" end connects to DS-094, DS-094N, DS-224 End Cap or DS-227 End Outlet
    • • • 5.68" end connects to DS-096, DS-224 End Cap or DS-227 End Outlet
    • LeveLoc™ re-bar supports with integral protruding knob
    • • • Levels channel and grips re-bar
    • • • Requires fewer accessories
    • ProFit™ locking system
    • • • Locks grate to integral frame
    • • • Supports product during installation
    • DuraLoc™ integral joint lock
    • • • Prevents joint movement during installation
    • • • No extra clamps or screws needed
    • Interlocking tongue and groove joints
    • Bottom outlet on each channel section
    • 0.7% built-in slope